ReviewsMicro Welders

WeldingCity 5-pk Gas Nozzle 169-715 169715 1/2

  • Premium gas nozzles (2-pk and 5-pk) for MIG welding gun in Miller Millermatic/MIGmatic and Hobart welders..
  • Gas nozzle 169715 (1/2" orifice, flush tip) for use with MIG welding gun M-10/M-15 (M-100/M-150) in Millermatic 135, 140, 175, 180, 210, 211, Passport and Passport Plus. Also replacement for gas nozzle 770-404 for some Hobart MIG welding guns such as H-9/H-10..
  • Gas nozzle 16972X and 200258 for use with MIG welding gun 150A - 400A M-25/M-40 series in Millermatic welders. 1/2" and 5/8" orifice.
  • tip-nozzle relationship recessed/flush/stick-out as per illustrated nozzle length for various part numbers..
  • Refer to your MIG welding gun user manual for selection of correct gas nozzle. Package of 2-pk and 5-pk. Volume discount available. Buy More Save More!.
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

Tool Parts 25mm Diameter Wire Feed Drive Roller Roll Wheel .030'-.035' For Mig Welders For Clarke, SIP, MIG100/130/160/180/200

  • Package Includes: 1*Wire Feed Drive Roller | Notes: The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. |.
  • 25mm Diameter Wire Feed Drive Roller Roll Wheel .030"-.035" for Mig Welders.
  • Fits for many standard build MIG welders such as for Clarke, SIP, MIG100/130/160/180/200 etc..
  • Welder wire feed drive roller roll parts 0.8-0.9 Knurled-Groove .030"-.035".
Check Stock

Jackson Safety BH3 Auto Darkening Filter Welding Helmet with Balder Technology, Black, Universal Size, 46157

  • Design: Jackson Safety BH3 Auto darkening filter lens (ADF) offers best optical clarity, diffusion of light and angular dependence with a true 1/1/1/1 rating (DIN rating EN379).
  • Clean View: Variable shades from 9 to 13 to shield and protect eyes from radiant energy during weld.
  • This helmet has shade, sensitivity and delay adjustments for different tasks, enabling welders to enjoy enhanced visibility.
  • Features: This Jackson Safety Welding helmet is compatible with magnification filters and hard hats (sold separately) and includes 3 headgear adjustments for the ability to suit a variety of welders and tasks.
  • Certified: Meets ANSI/ISEA Z87.1+ standard for high mass impact protection and welding use, and DIN Plus requirements for production quality.
Check Stock

150 Amp MIG Gun Torch Replacement for Miller - 12 Feet Cable - Two-Pin Signal Connector

  • This MIG Welding Torch is a direct replacement for Miller M-10/M-100 and M-150 MIG guns. - Cable Length: 2 feet with 16 mm2 power conductor..
  • High-quality MIG gun, small and lightweight. Suitable for most farm, shop and home projects, light repairs , maintenance, and autobody work applications.
  • Comes with compatible with Miller/Hobart Plug and 2-PIN Signal Connector, (Please check Picture #2 for dimensions and Table in Picture #4 for a list of compatible welders).
  • 169715 gas Nozzle - 000 Series Contact Tip - 169716 Gas Diffuser.
  • List of compatible Miller and Hobart welders: SideKick, SideKick XL, Cricket XL, Millermatic 90, Millermatic Millermatic 130, Millermatic 130XP, Millermatic 135, Millermatic 140s, Millermatic 175, Millermatic180s, DVIs /211, Challenger, Challenger 172, Passport, Passport Plus, Hobart IronMan 210..
Check Stock

EcoNour 2 in 1 Car Steering Wheel Desk | Steering Wheel Tray for Laptop Car Mount with Pen Holder | Car Food Tray for Eating with Drinks Holder | Multipurpose Travel Car Accessories

  • 6-pin TIG Foot Control Pedal Amptrol for Lincoln K870 Welders.
  • TIG weld foot pedal upgrade with steel case and OEM quality components..
  • Fitted with 6-pin standard male plug and 25-ft cable for Lincoln TIG welders..
  • Excellent choice for upgrade or replacement.
  • Press to activate gas contactor and increase amperage.
  • release to turn off and activate afterflow..
Check Stock

Magswitch MagSquare 600 Magnetic Welding Square Base Clamp Holder for Welding Kit, Tools, Supplies and Accessories, Magnet Switch with On/Off Capabilities, 600 lb Holding Force

  • MAGSQUARE 8100106: Hold and set just about anything, just about anywhere. With 607 lb strong holding force. These magnetic squares are the most versatile workholding and fixturing tool ever! Align and secure flat or round tubing pieces of steel to fabricate multi-angle holds.
  • WELDERS HELPER: Our welding & heavy fabrication tools are engineered to drive productivity for professional welders, fabricators and pipefitters. Large sheet leveling, sheet de-stacking, fixturing, weld grounding, mounting, metalworking, notching, workholding, positioning, alignment, spatter, fitting and many more applications are performed significantly faster.
  • ON/OFF SWITCH: The true ON and OFF capabilities create a platform that is more efficient, faster, safer and easier to use! Use it with tig, spot, stick torch, fiber, arc welders. Magnetic grip turns all the way off for quick release. No need to pry or fight magnet for precise positioning.
  • ENDLESS BENEFITS: Multiplane magnetic grip on 5 sides, pre-tapped holes for mounting. No electrical power source needed. Pull corners, secure steel sheets for cutting, use as a guide or make your own fixtures. A must for any welding table or cart.
  • EASY TO CLEAN: Powerful Magnet stays clean unlike traditional magnetic squares that hold ....
Check Stock

Tig Cooler Tig Welder Torch Water Cooling system 10L Water capacity,7L-12L/min Rated Water Flow with Flow Alarm WRC-300A 110V

  • This powerful cooling 110V water cooler is designed to work with TIG welders and provide maximum cooling capacity.
  • This plug may be removed or changed for applications with other brands of welders.
  • The unit features color coded quick connectors for rapid and....
  • The radiator is made from copper for maximum cooling capability.
  • Its pump is made from stainless steel with a bronze impeller for maximum wearability.
  • Industrial motor is sealed for best protection from the elements.
  • A generous reservoir holds 10L of coolant for maximum circulation capacity.
  • Use only distilled water or antifreeze specifically designed for use with TIG/MIG torch coolers.
Check Stock

Forney Easy Weld 29801 100ST Welder Start-Up Kit, Welding Starter Kit

  • KIT INCLUDES: a Forney Easy Weld 100 ST Welder, auto-darkening welding helmet, 3/32” steel electrodes, 4-1/2” Type 27 metal/steel grinding wheel, wire brush, driver gloves and a pair of welding gloves.
  • PERFECT FOR BEGINNERS: This kit is portable, and user friendly making it ideal for novice and beginning welders. All Forney Easy Weld machines come with a quick start guide to get you welding right away..
  • POWERFUL: The Forney Easy Weld 100 ST is small but mighty as it is able to weld up to 1/4" of mild steel. Also features 120-volt input and 90 AMP output..
  • LIGHTWEIGHT: The machine only weights 9. 65 lbs. , allowing you to take your machine to your project rather than hauling your project to your machine! This reduces the risk of damaging whatever it is you're working on..
  • CLICK ON THE (BY FORNEY) name above in blue under the title to view our full catalog of Welders, Abrasives, Chain/Wire Rope, Tools and more!.
Check Stock

6 Pieces Welders Pencil Carbide Scriber Tool with 48 Pcs Round Refills Silver Metal Welding Marker for Fitter Welder Steel Construction Fabrication Woodworking Glass Hardened Steel

  • Sufficient Quantity: it comes with 2 pieces of welders pencil and 48 pieces of refills in 4 boxes, 12 pieces in each box, sufficient quantity to meet your use, sufficient quantities to meet your daily using needs.
  • Illuminate metal marker: the round refill is 2.0 mm, measuring around 144 mm/ 5.7 inches in length, long enough to use.
  • And it can lay out an illuminate marker to help welder and pipe fitter to draw distinguishing lines and marking.
  • Simple to use: each welders pencil has a built in sharpener, convenient for you to sharpen the refill quickly, and the top has a clip that can be fixed to clothing, bringing you a lot of convenience.
Check Stock

2 Pcs Welders Sliver Streak Pencil with 48 PCS Round Refills Mechanical Pencils Metal Welding Marker for Tube Pipe Fitter Welder Steel Construction Woodworking (Red, Silver)

  • Sufficient Quantity: it comes with 2 pieces of welders pencil and 48 pieces of refills in 4 boxes, 12 pieces in each box, sufficient quantity to meet your use, sufficient quantities to meet your daily using needs.
  • Illuminate metal marker: the 2 mm round refills can lay out an illuminate marker that is not easily erased compared with soapstone pen, and the reflective marking can make a visible sign on metal and oily surface for welder and pipe fitter.
  • Simple to use: each welders pencil has a built in sharpener, convenient for you to sharpen the refill quickly, and the top has a clip that can be fixed to clothing, bringing you a lot of convenience.
Check Stock

E6013 3/32" 1/8" 5/32" Premium Arc Welding Rods Carbon Steel Electrode 10 lb x 2 (2-pk 3/32")

  • WELD ANYWHERe: Plug in the Century FC90 flux-cored wire feed welder anywhere 120V input power is available.
  • LIGHTWEIGHT & PORTABLE: Ideal for maintenance and mobile welders, thanks to its small and lightweight inverter design and shoulder strap for portability.
  • FC90 WELDER FEATURES: Automatic thermal protector shuts off output until machine cools to a normal operating temperature.
  • Easy to turn control knobs allow you to fine tune welding parameters.
  • Conveniently load your spool of wire on top of machine.
  • SMOOTH OPERATION: Inverter power source makes it more efficient to operate and provides smoother weld characteristics compared to traditional welders.
  • PERFECT FOR SMALL WELD JOBS: This machine is best for DIY projects, hobbyists, home repairs and more.
  • Infinite welding voltage allows fine-tuning of weld characteristics.
Check Stock