ReviewsMicrocontroller Programming

Sipytoph 37 in 1 Sensor Kit,37 Sensors Assortment Modules Starter DIY Kit with Box for Arduino Raspberry Pi 4 Pi 3,3B,,RPi A,Model B,B,

  • This sensor kit includes 37 sensor modules for you to learn basic knowledge about Raspberry Pi and sensors..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic..
  • Professional 37-in-1 Sensor Module Kit, Not only compatible for Arduino, but also compatible for Raspberry Pi 3,3B+,RPi A,A+,Model B,B+,2..
  • The highest cost performance kit for electronic hobbyist and advanced learners to expand Raspberry Pi and for Arduino programming..
  • With a detachable lattice plastic storage box, it is very easy to store and carry..
Check Stock

KEYESTUDIO Automatic Smart Plant Watering Kit for Arduino, Automatic Watering System for Your Plants

  • New Flexible Microcontroller Board --- Raspberry Pi Pico is a tiny, fast, and versatile board. It's based on RP2040 chip, which features a dual-core Arm Cortex-M0+ processor with 264KB internal RAM and support for up to 16MB of off-chip Flash, flexible clock running up to 133 MHz..
  • Multi-Function GPIO Pins---It has 26 multifunction GPIO pins, including 3 analogue inputs, 2 × UART, 2 × SPI controllers, 2 × I2C controllers, 16 × PWM channels..
  • Rich Peripheral Set---A wide range of flexible I/O options includes I2C, SPI, and — uniquely —8 × Programmable I/O (PIO) state machines for custom peripheral support..
  • Multiple Software Support---Raspberry Pi Pico has rich and complete software support and community resources. Programmable in C and MicroPython. Drag-and-drop programming using mass storage over USB..
  • This kit includes a Rpi Pico with headers soldered, 3-pin yellow header,830 breadboard, Doupont wires and micro USB cable..
Check Stock

7Pcs ATTINY88 Microcontroller Development Board 16Mhz I2C and SPI 26-PWM Digispark ATTINY85 Nano V3.0 Extended Module

  • ATTINY88 micro development board based microcontroller development board similar to the board line, only cheaper, smaller, and a bit less powerful..
  • With the ability to use the familiar IDE the MH-ET LIVE Tiny88(16.0Mhz) is a great board to jump into electronics, or perfect for when an other board is too big or too much..
  • ATTINY88 micro development board has 26 I/O Pins (2 are used for USB only if your program actively communicates over USB, otherwise you can use all 6 even if you are programming via USB).
  • ATTINY88 micro development board support for the IDE 1.0+ (OSX/Win/Linux).
  • The MH-ET LIVE Tiny88(16.0Mhz) is fully assembled except for the headersincluded and easy to solder them by yourself..
Check Stock

Treedix UNO Project Basic Starter Kit Multi-Function Shield Compatible with Arduino IDE UNO R3 MEGA Nano Kit for Starter

  • This Basic stater kit is great for beginners who are interested in learning programming. It is easy to learn and brings a lot of fun to learners. You can also DIY more interesting projects by yourself..
  • There is a ATmega328P microcontroller and expansion board in the kit, we provide 80 components, don’t worry, you definitely have enough accessories to complete your project.
  • We focus on updating and adding more advanced modules, such as dot matrix module, button module, DHT11 module, DS1302, etc. All modules are soldered, so it is easy to wire..
  • We attach great importance to product quality control, and have always cared about thecustoms experience and improve the product function details.
  • This kit is a high-quality kit, which is perfectly compatible with Arduino.
Check Stock

Ingcool Raspberry Pi Pico Senser Kit, Raspberry Pi Pico Microcontroller Board with Flexible Digital Interfaces,Based on RP2040 Microcontroller Chip,Include Humidity,Color,Liquid Sensors

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom.Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz.
  • 264KB of SRAM, and 2MB of onboard Flash memory.Castellated module allows soldering direct to carrier boards.USB 1.1 with device and host support.
  • Low-power sleep and dormant modes.Drag-and-drop programming using mass storage over USB.
  • 26 × multi-function GPIO pins.2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels.8 × Programmable I/O (PIO) state machines for custom peripheral support.
  • Accurate clock and timer on-chip.Temperature sensor.Accelerated floating-point libraries on-chip.
Check Stock

Yahboom Raspberry Pi 4B 3 B+ Ultimate Starter Kit with HD Camera, Programmable Smart Robot Car Kit with 4WD, Electronics Education DIY Kit for Teens(Raspberry Pi not Include)

  • ...teresting games with your friends,such as a wonderful car racing show..
  • Project super starter kit comes with aluminum alloy chassis (the upper layer is acrylic sheet), strong four-wheel drive, metal motor brackets and high quality battery,and expansion boards which compatible with Raspberry Pi, UNO R3, STMA32 and 51 microcontroller.
  • The Pi camera robot supports the latest Raspberry Pi 4b and 5G WiFi networks. The Pi 4 high-performance CPU makes the robot's work more smooth, including real-time transmission of 5G HD video.At the same time, yahboom provides 5 mirroring systems, and more learning materials are available on Yahboom website..
  • The Raspberry Pi kit is in bulk and needs to be installed by itself. This is a good DIY opportunity, a good choice for learning and entertainment. In addition, you can also learn C and Python programming through this robot..
  • Designed for both beginners and professionals to learn programming and robotics.If your kids, or friends are attracted to the electronics and robot world this kit would be a great choice and perfect toys gift for them to start their first step on the electronic journey. ★★Note: Raspberry Pi controller is not included in the kit, and robot can't be used without RPI.
Check Stock

KOOBOOK 2Sets HX1838 NEC Infrared IR Remote Control Sensor Module IR Receiver Module DIY Kit for arduino

  • Operating voltage 5V.Output form: Digital output..
  • VCC: 3.3V-5V external voltage (can be directly connected to the 5v microcontroller and 3.3v microcontroller).GND: external GND.IN: external microcontroller I/O port, I/O port has been designed 10K pull-up resistor..
  • Kit theory test distance of about 5-8 meters, but the practical application depends on the ambient factors you use, as well as the middle barrier (such as diaphragm, glass, obstructions or other material blocking), receiving head with HX1838 with power work instructions lights, receive 38K frequency any remote coding data..
  • remote Control Battery:CR2032 Button batteries (Not Included).
Check Stock

AMOCAM Semiconductor Fingerprint Password Access Control System with 5PCS ID Key Fobs, Biometrics Door Lock Keypad Controller Support 10000 Users, Waterproof, Backlight, Zinc Alloy Metal, Touch Panel

  • 【Multiple users, Multiple Access Ways】 Support 10000 user capacity, support open the door for fingerprint identification, ID key cards, password options, come with 5PCS ID key fobs..
  • 【Heavy-Duty Zinc Alloy Case】The access control keypad with strong zinc alloy electroplated anti-vandal and weatherproof. Epoxy to completely encapsulated, suitable for mounting either indoor or outdoor..
  • 【Simple Set-ups and Easy Installation】The access control is multifunction standalone access controller, full programming from the keypad. Biometric fingerprinting technology. Working with DC12V power supply..
  • 【Touch Password Panel Backlight】Access control keypad touch panel, 3-colour LEDs display the working status, blue backlight features keys. Stable and reliable with microcontroller design..
  • 【High Security and Widely Used】Access control system able to deterring unauthorized personnel, Suitable for apartment, office, garage door/gate openers, access control, off-limit area, hotel locks, school campus access, identification, parking lot entry, etc..
Check Stock

Adafruit Metro 328 with Headers - ATmega328

  • ATmega328 microcontroller with Optiboot (UNO) Bootloader.
  • A fully assembled and tested microcontroller and physical computing board with through-hole headers attached.
  • 32KB of flash and 2KB of RAM, running at 16 MHz.
  • Compatible with "Classic" and "R3" Shields.
Check Stock

AITRIP Pro Micro ATmega32U4 5V/16MHz Module Board, Replace with ATmega328 Pro Mini Compatible with Arduino with 2 Row pin Header 10pack

  • ATmega32U4 microcontroller: The Pro Micro is similar to the Pro Mini except with an ATmega32U4 on board. The USB transceiver inside the 32U4 allows us to add USB connectivity on-board and do away with bulky external USB interface..
  • The acceptable voltage range is 5 to 9 V..
  • On-Board micro-USB connector for programming.
  • This tiny little board does all of the neat-o tricks that you're familiar with: 4 channels of 10-bit ADC, 5 PWM pins, 12 DIOs as well as hardware serial connections Rx and Tx. Running at 16MHz and 5V, this board will remind you a lot of your other favorite pro-compatible boards but this little guy can go just about anywhere. If you're supplying unregulated power to the board, be sure to connect to the "RAW" pin on not VCC..
  • This latest revision corrects the silk error from the last version of the board so that pin 14 is correctly labeled. We've also added a PTC fuse and diode protection to the power circuit and corrected the RX and TX LED circuit..
Check Stock

Arduino Vidor 4000 [ABX00022]

  • The best of the embedded world: a low power microcontroller to handle reprogramming, communication, and analog sensing, together with an FPGA to perform high speed computation, and a dual WiFi-BLE chipset for wireless communication..
  • Mini HDMI output / MIPI camera input: can capture sound in real time, create a real-time computer reading sensor information,sending it to monitor or capture video, overlay sensor information on the image and send it to a screen..
  • Ideal for: Industry 4.0, home automation, computer vision, aerospace, telecommunications.
  • Part of the Arduino Maker Board Family for IoT Devices, easy to program with Arduino Software and Intel’s FPGA suite..
  • Easy interface between the microcontroller and the FPGA at the software level..
Check Stock