ReviewsMicrocontroller Sensor

FINDER 90.26 Relay Socket, 250V, 10A, DIN Rail

  • Output can be directly connected to microcontroller, through single chip microcomputer to detect the high and low level, thus to detect whether there is a vibration environment, call the police..
  • This module is compared with the normally open type vibration sensor module, vibration trigger for longer periods of time, can drive the relay module..
  • Product vibration, the vibration switch instantaneous disconnection, output the output high level, the green light is not bright.
  • Product no vibration, vibration switch is closed on state, the output terminal output low level, the green light is lit.
  • Used to trigger the effect of various vibration, theft alarm, intelligent car, earthquake alarm, motorcycle alarm, etc.
Check Stock

AOICRIE Upgraded Advanced Version 37 in 1 Sensor Modules Kit with Tutorial Compatible for IDE R3 MEGA2560 for Nano, Starter The RFID Learn Suite Kit LCD 1602 for R3

  • 37 Sensors Assortment Kit for Arduino MCU Education.
  • RFID Starter Kit for R3 Upgraded version Learning Suite With Retail Box Upgraded Version of Starter Kit RFID Stepper Motor Learning Kits with a CD for starter learning !!!.
  • Professional 37-in-1 Sensor Module Kit, NOT ONLY compatible for BUT ALSO compatible for raspberry pi RPi 3 2 Model B A A+ B+, Complete Update and common models for Mega 2560 starter kit..
  • Great sensor kit with tutorials compatible for raspberry pi, Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
  • Upgraded tutorial only for R3, for MEGA2560 R3, for NANO in CD, listing paper, There are tutorials in the CD that comes with. or download the tutorials online from the official website..
Check Stock

Dorhea 37 in 1 Sensor Modules Kit with Tutorial for R3 Board Mega2560 Mega328 Nano Compatible with IDE Raspberry Pi

  • 37 in 1 sensor module Kit is complete update and common models,compatible with arduino R3, MEGA 2560, NANO and Raspberry pi..
  • All components compatible with Arduino IDE, can be used directly..
  • Standard interface can be controlled directly by microcontroller ( 8051, AVR, PIC, DSP, ARM, ARM, MSP430, TTL logic)..
  • Upgraded tutorial only for R3, MEGA2560 R3, NANO in CD, There are tutorials in the CD that comes with..
  • Complete Update and common models for arduino NANO R3 Mega 2560 starter kit..
Check Stock

Adafruit Metro 328 with Headers - ATmega328

  • ATmega328 microcontroller with Optiboot (UNO) Bootloader.
  • A fully assembled and tested microcontroller and physical computing board with through-hole headers attached.
  • 32KB of flash and 2KB of RAM, running at 16 MHz.
  • Compatible with "Classic" and "R3" Shields.
Check Stock

ENDGAME GEAR XM1r Gaming Mouse, Programmable Mouse with 5 Buttons and 19,000 DPI, Black

  • ... light weight further strengthen this ergonomic gaming mouse..
  • SUPERIOR, SMOOTH MOVEMENT: Tighten reaction time with Kailh GM 8.0 switches that register immediately. The PixArt PAW3370 optical sensor (up to 19,000 DPI) empowers rapid movement. With the STM32 Arm Cortex MCU microcontroller, internal signal-processing latency stays below 1 millisecond. No lag!.
  • CUTTING-EDGE COMFORT: The symmetrical XM1r is anti-sweat and easy to grip. The 2 main buttons, 2 thumb buttons, and mouse wheel enable simultaneous inputs, like moving and jumping while throwing a grenade. At only 70 g, the mouse features undisturbed sliding on large Teflon feet..
  • WIDELY COMPATIBLE: Available in black, white, dark frost, or dark reflex, the XM1r wired mouse measures 6.58 x 3.81 x 12.19 cm and weighs only 2.47 oz., fitting alongside any PC gaming-accessories setup. It connects via an extradurable 185-centimeter flex cord 2.0 to any PC with a USB 2.0 Type-A port..
  • NEXT LEVEL OF THE XM1: The XM1r is a refresh of the XM1 Gaming Mouse featuring an updated PixArt PAW3370 optical sensor and custom-sorted Kailh GM 8.0....
Check Stock

Ingcool Raspberry Pi Pico Senser Kit, Raspberry Pi Pico Microcontroller Board with Flexible Digital Interfaces,Based on RP2040 Microcontroller Chip,Include Humidity,Color,Liquid Sensors

  • RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom.Dual-core Arm Cortex M0+ processor, the flexible clock running up to 133 MHz.
  • 264KB of SRAM, and 2MB of onboard Flash memory.Castellated module allows soldering direct to carrier boards.USB 1.1 with device and host support.
  • Low-power sleep and dormant modes.Drag-and-drop programming using mass storage over USB.
  • 26 × multi-function GPIO pins.2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels.8 × Programmable I/O (PIO) state machines for custom peripheral support.
  • Accurate clock and timer on-chip.Temperature sensor.Accelerated floating-point libraries on-chip.
Check Stock

SainSmart USB 4 Channel Relay Automation (5V)

  • NOYITO 2-Channel Micro USB Relay Module is equipped with a stable USB to serial port chip and a microcontroller. It can use the serial port debugging software to send serial commands on the computer to control the opening and closing of the 2-channel relay..
  • Onboard high performance microcontroller chip, CH340 USB control chip.With power LED indicator and relay status LED.On-board 2-channel 5V, 10A/250VAC, 10A/30VDC relay, long relay life, can work 100,000 times continuously..
  • Module with overcurrent protection and relay diode freewheel protection..
  • NOYITO 8-Channel Micro USB Relay Module ASIN：B09RGTSHHW.
  • NOYITO 4-Channel Micro USB Relay Module ASIN：B09RGVQXXT.
Check Stock

Diodes Incorporated Microprocessors - MPU ARM Cortex-A5 MPU 32bit, Video decoder (ATSAMA5D44A-CU)

  • 1 Pcs ATTINY84A-PU 8-bit Microcontroller with 8K Bytes In-System Programmable Flash..
  • MCU MICROCONTROLLER, 8 BIT, ATTINY, 20MHZ, DIP-14..
  • 8K Bytes of In-System, Self-programmable Flash Program Memory.
  • 512 Bytes of In-System Programmable EEPROM.
  • New and original ,quality ensured , no-hassle refund if you are not 100% satisfied!.
Check Stock

Digital Manometer, Portable Handheld Air Vacuum/Gas Pressure Gauge Meter 11 Units with Backlight, ±13.78kPa ±2PSI, Suitable for Differential Pressure of 1-2 Pipes, Ventilation HVAC

  • The MPXV7002 is designed to measure positive and negative pressure..
  • The MPXV7002 series piezoresistive transducer in the small outline package (SOP) is a state-of-the-art monolithic silicon pressure sensor designed for a wide range of applications..
  • And particularly those employing a microcontroller or microprocessor with A/D inputs..
  • This patented, single element transducer combines advanced micromachining techniques, thin-film metallization and bipolar processing which provide an accurate, high level analog output signal that is proportional to the applied pressure..
  • In addition, with an offset specifically at 2.5V instead of the conventional 0V, this new series allows to measure pressure up to 7kPa through each port for pressure sensing but also for vacuum sensing (refer to the transfer function in the data sheet for more detailed information)..
Check Stock

Prg-108 GQ-4X V4 (GQ-4X4) Programmer + ADP-019 PSOP44 Adapter V2

  • The ST-LINK/V2 is an in-circuit debugger and programmer for the STM8 and STM32 microcontroller families.
  • The single wire interface module (SWIM) and JTAG/serial wire debugging (SWD) interfaces are used to communicate with any STM8 or STM32 microcontroller located on an application board.
  • STM8 applications use the USB full-speed interface to communicate with the ST Visual Develop (STVD) or ST Visual Program (STVP) software..
  • STM32 applications use the USB full-speed interface to communicate with Atollic, IAR, Keilor TASKING integrated development environments..
Check Stock

Lystaii 320pcs M3 Nylon Hex Spacer Standoff Kit Male Female Screw Nut Threaded Pillar Hex Standoff PCB Motherboard Circuit Board Standoffs Mounting Hardware Spacer Assortment Kit (Black)

  • Package Content: 320pcs M3 Hex Spacer Standoff Kit, sufficiont quantity to meet you different needs. Comes with the plastic box, all the parts are in their individual compartments - spacers, screws, nuts and stand-off..
  • Material: these standoff kit is made of high quality nylon, durable, sturdy, anticorrosive, lightweight. Color: Black. This is needed if you're building drones..
  • Easy to Use: the M3 Hex standoff kit is very easy to install, convenient and practical small tools in your life. Compact and Portable..
  • Wide Application: PCB Motherboard, PDB and flight controller stack building, Sound Boards, controller board building, microcontroller board building, motion sensor mounting, and so on..
  • Good Workmanship: These are precisely made, they fit together perfectly. These stand-offs can fix your boards firmly in place. The non-conducting stand-offs work really well to organize the controller board and the sound boards without accidentally shorting them out..
Check Stock