ReviewsMicrometer For Angle Measurement

Mitutoyo 137-213 Tubular Vernier Inside Micrometer, Extension Rod Type, 2-20\ Range, 0.001\ Graduation, +/-6.00052\ Accuracy, 6 pcs Extension Rods

  • Tubular micrometer measures the inside dimensions of cylinders, rings, and parallel surfaces.
  • Vernier scale in inch units for taking precise inside dimension (ID) measurements.
  • Includes interchangeable extension rods for a diversified range of measurement.
  • Slow head travel helps provide fine positioning.
  • Solid extension rods help provide durability.
Check Stock

Devil s Protractor [Explicit]

  • Precise angle and/or slope measurement with angle meter, bubble level, laser level with Accelerometer or Rotation Vector Sensor. (Check sensor....
  • Option to measure angle or slope on surfaces not parallel to ground with relative angle measurement mode..
  • 2 orientation axis for measurement.(Move your device left/right or back/forward direction to measure angle).
  • Option to measure difference between 2 separate measurements with difference measurement mode..
  • Option to measure angles using very accurate Rotation Vector Sensor, or Accelerometer..
Check Stock

Push Button Safety with Pin and Spring, Steel Construction (Stainless-)

  • All the features of the Bench Rest Seater Die plus a Micrometer for adjusting bullet seating depth.
  • Micrometer allows fine-tuning in either direction.
  • Gradations at increments of .001″ are clearly marked.
  • Eliminates much of the trial and error that was once associated with seating accurate rounds.
  • Bright, white markings make micrometer easy to read.
Check Stock

Caliper Measuring Tool Digital Caliper Industrial Quality Precision Electronic Vernier Caliper Inch/Millimeter Measurement Micrometer for Jewelry - Accuracy Ip54 Waterproof Caliper Measure Tool

  • INDUSTRIAL GRADE: Different from most calipers using copper measuring sensors, our digital caliper adopts glass material sensor, which effectively prevents the accuracy of caliper effecting by temperature, humidity, magnetism, etc and greatly ensures the stability of measurement. You can easily minimize errors, save delays, and make high-precision measurements using our caliper measuring tool..
  • PRECISION AND ACCURACY: You can measure thickness, width or depth down to 0.001 inch with our caliper. This level of precision is required if anything needs to be correctly fitted and sealed. It allows you to make pieces that fit perfectly and leave no room for error. measurement accuracy: ±0.02mm/ 0.001 inch.
  • LONGER USEFUL LIFE: The housing is composed of zinc alloy and the ruler of the caliper is made of first-class thickened stainless steel,Fine polished stainless steel and new groove processing on the depthometer provide a more attractive, smoother slide and reliable results.all metal construction ensures the longer spanlife of caliper.
  • ZERO FUNCTION: Metric And Inch Conversion: Switch Free between metric and inch measurements, It can save our conversion time during the measurement process, smart design allows you to easily reset to zero by pressing the zero....
Check Stock

Digital Caliper, 6 Inch Caliper Measuring Tool Micrometer Vernier Caliper with Stainless Steel, Electronic Micrometer Calipers with Large LCD Screen, Auto-Off Feature, Inch Metric Fraction Conversion

  • PRECISE & ACCURATE: Digital micrometer have a measuring range of 0 - 6"/ 0 - 150mm.
  • accuracy ±0.001"/ 0.02mm, resolution 0.0005"/ 0.01mm. A perfect and accurate caliper measuring tool for household or DIY, convenient for your measurement works, especially as woodworking or drafting calipers..
  • 3 UNITS CONVERSION: 6 inch digital caliper can be measured by one button in unit switch, inch, millimeter and fraction based on your habits with the push of a button, easy to use. And you can also reset the data to zero through zero button when you take the second measurement..
  • STAINLESS STEEL CALIPER: The body of the caliper measuring tool is made of finely polished stainless steel, and the caliper has knurled thumb wheels and locking screws to ensure smooth slide and accurate positioning during measurement..
  • 4 MEASUREMENT MODES & AUTO OFF: This caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal diameter to meet your multiple needs. Caliper will automatically turn off within 5 mins when not running, which can extend the battery life cycle..
  • WIDE APPLICATION: This electronic precision caliper is always used for professionals and hobbyists alike, by carpenter, jewelers, hobbyists, woodworkers,....
Check Stock

Mitutoyo 137-013 Tubular Vernier Inside Micrometer, Extension Rod Type, Carbide Tipped Face, 50-63mm Range, 0.01mm Graduation, +/-0.004mm Accuracy

  • Tubular micrometer measures the inside dimensions of cylinders, rings, and parallel surfaces.
  • Vernier scale in metric units for taking precise inside dimension (ID) measurements.
  • Includes interchangeable extension rods for a diversified range of measurement.
  • Slow head travel helps provide fine positioning.
  • Carbide measuring faces help provide wear resistance.
Check Stock

Mitutoyo 137-204 Tubular Vernier Inside Micrometer, Extension Rod Type, 50-1000mm Range, 0.01mm Graduation, +/-0.031mm Accuracy, 8 pcs Extension Rods

  • Tubular micrometer measures the inside dimensions of cylinders, rings, and parallel surfaces.
  • Vernier scale in metric units for taking precise inside dimension (ID) measurements.
  • Includes interchangeable extension rods for a diversified range of measurement.
  • Slow head travel helps provide fine positioning.
  • Solid extension rods help provide durability.
Check Stock

Lyman Pro Micrometer Seating Die - 9mm, Stainless Steel

  • Our Micrometer Seating Die gives you exact bullet seating length and minimal run-out.
  • Has a micrometer adjustable seating head for precision bullet seating length.
  • If you want to change your bullet seating depth a few thousandths of an inch, simply turn the micrometer head to the required setting.
  • Its floating bullet seating punch centers the bullet on the case and eliminates excessive run-out.
  • Made of corrosion resistant stainless steel which protects it from rust and keeps it looking like new for a lifetime of use.
Check Stock

VOLCANOES CLUB 3 in 1 Digital Angle Finder Protractor - Angle Gauge Spirit Level Ruler with INCH/MM & Level Bubble Vials - Measuring Super Gauge Tool - Decoration, Construction, Woodworking, Machinery

  • 3 IN 1 DIGITAL ANGLE FINDER: Our angle finder is a very convenient woodworking tool in angle (inner and exterior angles) measurement, length (inches and millimeters) measurement and as a spirt level judge whether it is a level or not..
  • HIGH ACCURACY: The equipment has higher resolution of 0.05°and higher accuracy of ±0.1°. It can quickly and accurately calculate the angle. By adding three vials (Horizontal level/ Vertical level/ Circular level), it can be used Like a spirit level and achieve multiple measurements, such as horizontal measurement、vertical measurement as well as universal measurement . (It will not display numbers on the screen, and just help you to judge whether it is a level or not.).
  • FUNCTIONS AND FEATURES: ‘HOLD BUTTON’ can keep the measurement result at any angle, so as to transfer the measurement result to read and record. ‘LOCKING KNOB’ also can fix the angle shape, so as to transfer the angle and draw it on the paper. (The purpose of the locking knob is to adjust the tightness, not to lock the measurement.) ‘AUTOMATIC TURN OFF’ after 5 minutes without any operation or movement to extend the battery life. ‘HANGING HOLE’ is easy to store and carry..
  • MATERIAL: Our angle ruler is made of special hard plastic. Compa....
Check Stock

0.1mm High Precision Ocular Micrometer+0.01mm Stage Micrometer Microscope Micrometer

  • 0.01mm Stage Micrometer Microscope Micrometer.Material: optical glass.Size: 75mm x 25mm x 1mm. Total length of scale is 1mm that is subdivided into 100 divisions，each division is 0.01mm.
  • 0.1mm High Precision Ocular Micrometer. Material: optical glass. Div.x: 0.1mm；y: 0.1mm，10mm/100.
Check Stock

Fowler 52-248-001-1 Outside Metric Micrometer with 0-25mm Measuring Range

  • Micrometer Gage: The outside micrometer features a flat anvil and spindle for general purpose measuring with microfine graduations.
  • Accurate Measurements: Anvil and spindle hardened and precision ground with micro-lapped finish on tips.
  • 0.256" diameter of measuring faces, 0.01mm....
  • Durable Material: Hardened, ground, and lapped spindle thread provides smooth movement, accuracy, and long life.
  • Satin Chrome Finish: Vernier scale with hammertone blue baked-enamel frame with microfine graduations on a non-glare, satin chrome background, and....
  • Set Includes: A Fowler outside micrometer, a wrench, and a fitted case for storage.
Check Stock