ReviewsMicrometer For Diameter Measurement

Michark Digital Caliper Caliper Measuring Tool Electronic Micrometer Calipers Stainless Steel Vernier Caliper with Large LCD Screen/Inch and Millimeter Conversion/Auto-Off with Case, 6 to 7.9 Inches

【Precise Measurement】 Measurement range: 0 - 6" / 0 - 150mm.
Accuracy: ±0.03mm/0.001". The knurled thumb wheel and screws ensure smooth sliding and accurate scale positioning. stainless steel accurate digital caliper measuring tool is perfect for household or DIY measurement..
【Extra Large LCD Display】The digital calipers is euiqpped with an easy-to-read 2“x0.8" LCD screen that helps you to get precise results quickly and easily. ON/OFF button is to turn on or turn off display, ZERO button helps to set the reading on display to be zero..
【4 Measuring Modes】 This micrometer can be used to measure inside and outside diameter, depth and step with two sets of jaws and a probe. It comes with 3 batteries in total and it is very easy to install the battery without any tools. One battery can last about one year. Auto off after 5 minutes. When you don't use it for a long time, please tighten the screw to make the caliper fixed to avoid wasting battery power..
【Inch/mm Conversion】One button switches between two units quickly -- inch and millimeter. Home DIY and professional use are both highly recommended. A portable case for this digital caliper measuring tool allows you to take it anywhere and protect it well....

Check Stock

Kynup Caliper Measuring Tool Digital Micrometer Caliper Tool Vernier Caliper with Stainless Steel Large LCD Screen Auto - Off Feature Inch Metric Fraction Conversion 6Inch/150mm

【Precision】Kynup digital caliper measuring tool has a measurement range of 0 - 6''/ 0 - 150 mm.
accuracy to ±0.001”/0.02mm and resolution to 0.0005"/0.01mm. Perfect and accurate caliper measuring tool for household or DIY measurement. Please choose stainless steel caliper measuring tool for more accurate measuring..
【3 Units Conversion】 You can switch 3 different readings with the micrometer caliper: inch, mm and fraction based on your habits with the push of a button. Press the on/off button, slide the digital dial caliper to anywhere, then you can read the values on the display. And you can reset it to zero by zero button..
【Rest Assured Quality】 The body of the dial caliper measuring tool is constructed using finely polished stainless steel with a knurled thumb roller and locking screw that ensures smooth sliding and accurate positioning when taking measurements..
【4 Measuring Ways】Kynup vernier caliper comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal diameter, making all your objects measurable. 3 batteries are provided: one installed and other two as spare batteries.
【Wide Application & Auto Off】The 6 inch metric measuring tools is always used by professionals and h....

Check Stock

Kynup Digital Caliper 8 Inch Caliper Measuring Tool with Stainless Steel IP54 Splash Proof Protection Design Easy Switch from Inch Metric Fraction Large LCD Screen 200mm

【3 Units Conversion】 You can switch 3 units with the calipers: inch, mm and fraction based on your habits with the push of a button. Press the....
【Precise & Accurate】 Kynup 8" caliper has a measurement range of 0 - 8''/ 0 - 200mm.
accuracy to ±0.001”/0.02mm and resolution to....
【4 Measuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal....
【Splash Proof & Stainless Steel Material】The Splash Proof micrometer is constructed of first-class STAINLESS STEEL, Splash Proof, anti-rust, which....
【Wide Application & Auto Off】The 8 inch caliper micrometer is always used by professionals and hobbyists alike, by jewelers, hobbyists,....

Check Stock

50mm Caliper Calibration Rod, Stainless Steel Calibration Bar for Accurate Measuring

STAINLESS STEEL MATERIAL: The outside micrometer is made of premium stainless steel, so it is not easy to deform and is durable in use..
HIGH QUALITY: The outside micrometer standard caliper is 100% brand newbrand new and has a high quality..
VARIOUS SPECIFICATIONS: The outside micrometer standard caliper is a professional measuring tool, there are various specifications for your choice..
CONVENIENCE: The stainless steel outside micrometer calibration bar has reasonable size and light weight, which is convenient to use and carry..
MAIN APPLICATION: The stainless steel outside micrometer calibration bar is mainly used for calibrating micrometers..

Check Stock

Fowler 52-253-004-1, Premium Outside Inch Micrometer With 3-4\ Measuring Range

Micrometer Screw Gauge: With flat anvil/spindle pair for general purpose measuring.
microfine graduations and carbide-tipped measuring faces.
0.001" graduation and ± 0.001" accuracy for precise readings.
Accurate Measurements: Anvil and spindle hardened and precision-ground with microlap finish on tips.
0.256" diameter of measuring faces, 0.00003" flatness, and 0.00008" parallelism on 3-4" micrometers for accurate measurements.
Easy to Use: Quick, easy zero adjustment on the sleeve and positive lever locking clamp.
friction thimble with ratchet stop applies constant force for repeatability between users.
Satin Chrome Finish: Vernier scale with hammertone blue baked-enamel frame with heat-insulated frames.
the finishing on the thimble and sleeve helps reduce rust and glare, while the lapped spindle thread provides smooth movement, extending product life.
Set Includes: An outside micrometer with a vernier scale of 0.001.

Check Stock

Fowler 54-220-777-1, IP54 Digital Micrometer Head with 0-1\/25mm Measuring Range

Micrometer Head: For general purpose measuring applications.
carbide-tipped measuring face with an accuracy of 0.00012″/0.003mm for precise readings.
Precision Measurements: This digital micrometer with a 0-1"/25mm range has a friction thimble that provides smooth and quiet performance and is suitable for one-handed operation.
Easy to Use: Digital micrometer head features an LCD that performs direct inch/metric conversions and has a switchable resolution of 0.00005"/0.001mm.
meets IP54 specifications for dust and water protection.
Data Output: Digital micrometer with RS-232 output that provides the ability to export readings to a computer (cable not included).
Set Includes: Fowler micrometer head, a spare battery, and a battery removal tool.

Check Stock

Microscope Stage Micrometer Calibration Slide (TCM-H) with 4-Scales and 0.01mm Line Resolution

Microscope Stage Micrometer Calibration Slide with 4-Scales and 0.01mm Line Resolution.
Size of a typical slide (3"x1"), works well with most microscopes.
Great tool for microscope measurement and calibration.

Check Stock

Starrett 949 Case only for Electronic Outside Micrometer NO.3734/734 Series

The Starrett 949 Deluxe Padded Case is sized to store and protect a single outside electronic micrometer that measures to 1 inch (25 mm)..
The case has rounded edges, is made of steel with a vinyl covering, and has fitted foam padding to house an electronic micrometer, a CR2450 battery, and adjustment wrench (sold separately)..
The case is an accessory for use only with a Starrett micrometer that measures 0-1” (25 mm)..
Fits Model Series 731, 733, 734, 3734, 756, 788, 733.1, 756.1 and 788.1 (Micrometer sold separately)..

Check Stock

Fowler 52-240-006-1 Outside Inch Micrometer with 5-6 Measuring Range

Micrometer: The Fowler series of outside micrometers features exceptional quality and accuracy with a ratchet thimble.
Accurate Readings: Micrometer has microfine 0.0001" graduations and accuracy of ±0.00025".
carbide-tipped anvil and spindle have 0.256" measuring....
Easy-to-Read Display: Distinct figures and graduations on the micrometer permit easy reading that allows for measuring with extra ease and comfort.
Durable Construction: Hardened, precision-ground, and carbide-tipped anvil and spindle with microfine graduations.
Set Includes: A Fowler micrometer with ratchet thimble, a standard, a wrench, and a fitted case.

Check Stock

Mitutoyo 137-213 Tubular Vernier Inside Micrometer, Extension Rod Type, 2-20\ Range, 0.001\ Graduation, +/-6.00052\ Accuracy, 6 pcs Extension Rods

Tubular micrometer measures the inside dimensions of cylinders, rings, and parallel surfaces.
Vernier scale in inch units for taking precise inside dimension (ID) measurements.
Includes interchangeable extension rods for a diversified range of measurement.
Slow head travel helps provide fine positioning.
Solid extension rods help provide durability.

Check Stock

HHIP 1001-0201 Indexable Tool Set, 2 Boring Head, R8 Shank, 4 Boring Bars

Boring head features a 1-1/2"-18 threaded back so you can change shanks as needed.
A micrometer lead screw provides 0. 001" direct reading accuracy and makes adjusting easy.

Check Stock