ReviewsMicrometer Mm

Kynup Digital Caliper Calipers 6 Inch Measuring Tool with Stainless Steel IP54 Splash Proof Protection Design Easy Switch from Inch Metric Fraction Large LCD Screen 150mm

...easuring Ways】 Caliper measuring tool comes with two sets of jaws and a probe, which are easy to measure depth, step, external and internal diameter, making all your objects measurable. 3 batteries are provided: one installed and other two as spare batteries.
【Wide Application & Auto Off】The 6 inch caliper micrometer is always used by professionals and hobbyists alike, by jewelers, hobbyists, woodworkers, DIY. Auto shutdown for saving battery after within 6 minutes if without operation.
【Splash Proof & Stainless Steel Material】The Splash Proof micrometer is constructed of first-class STAINLESS STEEL, Splash Proof, anti-rust, which has a strong frame with lockable head. The housing is made of metal with silver paint on the surface..

All the features of the Bench Rest Seater Die plus a Micrometer for adjusting bullet seating depth.
Micrometer allows fine-tuning in either direction.
Gradations at increments of .001″ are clearly marked.
Eliminates much of the trial and error that was once associated with seating accurate rounds.
Bright, white markings make micrometer easy to read.

Microscope Stage Micrometer Calibration Slide with 4-Scales and 0.01mm Line Resolution.
Size of a typical slide (3"x1"), works well with most microscopes.
Great tool for microscope measurement and calibration.

Our Micrometer Seating Die gives you exact bullet seating length and minimal run-out.
Has a micrometer adjustable seating head for precision bullet seating length.
If you want to change your bullet seating depth a few thousandths of an inch, simply turn the micrometer head to the required setting.
Its floating bullet seating punch centers the bullet on the case and eliminates excessive run-out.
Made of corrosion resistant stainless steel which protects it from rust and keeps it looking like new for a lifetime of use.

Digimatic caliper with Absolute Encoder (Range: 0 - 6 inch / 0 - 150mm, LCD Resolution: .0005 inch/ 0.001mm).Supplied in a mahogany case.
The micrometer spanner is a supplied accessory.

Includes: Electronic caliper, range 06-"/0-150mm, resolution . 0005"/0. 01mm (1108-150).
Outside micrometer, range 0-1", graduation . 0001" (3202-1).
Dial indicator, range 1", graduation . 001" (2307-1). Magnetic stand (6201-60).
Protractor, range 0-180°, graduation 1° (4799-180). Pitch gauge, range 4-42TPI, 30pcs, unified 60° thread (4820-230).
Radius gauge, range 1/32"-1/4" (4801-15E). Feeler gauge, range . 0015-. 035", 31pcs (4608-31).
90° bevelled edge square, 3. 937x2. 756", grade 0 (4790-1000). Scriber (7230).
Zero setting bar for depth base attachment..

1 x 2.5mm Nozzle (1 nozzle was pre-installed to the spray gun).
1x True Micrometer Air Regulator with Gauge.
This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting..
It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications.
Light weight, ergonomic design and easy trigger pivot reduces operating fatigue..
Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty..

...d easy-to-read LCD display helps you get precise results quickly and easily. even under strong sunlight or in dismal surroundings. Aslo the locking screws ensure that the measuring jaws are securely secured, allowing for more precise measurements..
【Screen Splash Proof & Stainless Steel Material】The dial caliper micrometer is constructed of first-class STAINLESS STEEL, Screen Splash Proof, anti-rust, which has a strong frame with lockable head. The housing is made of metal with silver paint on the surface. Note: please do not install the battery backwards..
【3 Units Conversion】 You can switch 3 units with the digital micrometer: inch, mm and fraction based on your habits with the push of a button. Press the on/off button, slide the digital caliper to anywhere, then you can read the values on the display. And you can reset it to zero by zero button..
【4 Measuring Ways】 This digital caliper measuring tool is easy to measure depth, step, external and internal diameter, making all your objects measurable. 3 batteries are provided: one installed and other two as spare batteries. Auto shutdown for saving battery after within 6 minutes if without operation..

HIGH-PRECISION MEASURING TOOL SET: Set includes a 4 carbide outside micrometers, calibration standards, and adjusting wrenches packaged neatly in a padded hard shell case. Every order you will receive a set of 0-1" / 1-2" / 2-3" / 3-4" outside micrometers with microfine Graduations: 0.0001" and Accuracy: ±0.0001" for precise readings every time.
FRICTION/RATCHET-STOP THIMBLE: Each micrometer has a metal ratchet-stop thimble with a speeder knob to reduce the time it takes to open and close the micrometer. To Prevent over tightening the constant-force mechanism stops the micrometer’s spindle from tightening once it contacts the surface of the measured object.
EXCLUSIVE RED COLOR FINISH: We believe your tools should work great and be something you're proud to display. That's why we have designed this exclusive Direct-Reading Vernier Scale Micrometer set unlike any of the others. The red textured design and satin chrome thimble helps resist rust, reduce glare and are easily identifiable in your shop.
WIDE VARIETY OF USES: This Outside Micrometer Set is Perfect for DIY, Hobbyists, CNC Machinists, Fabricators, Automotive Mechanics, and Inspection Tools. Sandor Tools Outside Micrometers help you measure the outside dimensions (OD) of raw materials, whole wo....

Digit Micrometer: Digit display has 0.001" graduations with a resolution of 0.0001" on the sleeve and an accuracy of 0.00016" (0-1” unit) for precise readings.
Accurate Readings: Outside micrometer set has a 0" to 3" measuring range and flat anvil/spindle pair with 0.256" diameter measuring faces for general purpose measuring.
Optimum Performance: Hardened, ground and lapped spindle thread provides smooth movement, accuracy, and long life.
ratchet stop provides a constant force for repeatability between users.
Durable Construction: Features thermal insulated frame.
blue baked-enamel frame provides durability and is heat-insulated to reduce temperature-related expansion or contraction for more accurate measurements.
Set includes: The digit micrometer set includes 0 to 1", 1 to 2" and 2 to 3", standard micrometers, a spanner wrench, and a shop hardened case for storage.