ReviewsMicrometer Set

Fowler 52-253-004-1, Premium Outside Inch Micrometer With 3-4\ Measuring Range

  • Micrometer Screw Gauge: With flat anvil/spindle pair for general purpose measuring.
  • microfine graduations and carbide-tipped measuring faces.
  • 0.001" graduation and ± 0.001" accuracy for precise readings.
  • Accurate Measurements: Anvil and spindle hardened and precision-ground with microlap finish on tips.
  • 0.256" diameter of measuring faces, 0.00003" flatness, and 0.00008" parallelism on 3-4" micrometers for accurate measurements.
  • Easy to Use: Quick, easy zero adjustment on the sleeve and positive lever locking clamp.
  • friction thimble with ratchet stop applies constant force for repeatability between users.
  • Satin Chrome Finish: Vernier scale with hammertone blue baked-enamel frame with heat-insulated frames.
  • the finishing on the thimble and sleeve helps reduce rust and glare, while the lapped spindle thread provides smooth movement, extending product life.
  • Set Includes: An outside micrometer with a vernier scale of 0.001.
Check Stock

Lyman Pro Micrometer Seating Die - 9mm, Stainless Steel

  • Our Micrometer Seating Die gives you exact bullet seating length and minimal run-out.
  • Has a micrometer adjustable seating head for precision bullet seating length.
  • If you want to change your bullet seating depth a few thousandths of an inch, simply turn the micrometer head to the required setting.
  • Its floating bullet seating punch centers the bullet on the case and eliminates excessive run-out.
  • Made of corrosion resistant stainless steel which protects it from rust and keeps it looking like new for a lifetime of use.
Check Stock

YELLOW JACKET 60652 Eight Head Torque Wrench Kit

  • Precision Torque Wrench For Exact Tightening To 10-80 N-M Or 7.4-59 Ft. Lb.
  • Adjustable in newton-meters and foot-pound.
  • Interchangeable open end adapters (sizes: 17, 22, 24, 26, 27 & 29 mm on 60650 and additional 16 and 21 mm on 60652).
  • The n-m and foot-pound (ft-lb) scales are marked on the barrel of the wrench for easy and permanent reference.
  • The micrometer-type sleeve is easy to read and allows accurate pre-set torque values to be set. When the set torque is reached.
Check Stock

Mitutoyo 141-205 Inside Micrometer, 0.01mm Resolution, 50-200mm Range

  • Wide range of ID measurements with 3 interchangeable rods.
  • Each interchangeable rod is marked with its measuring range.
  • The sizes of interchangeable rods can be adjusted with spacing collars.
  • Travel of micrometer head is 13 millimeters.
  • Both micrometer head and furnished rods are satin-chrome finished throughout, supplied in fitted plastic case.
Check Stock

Capos and Electric Tambourines

  • CAPO FOR ACOUSTIC GUITAR & ELECTRIC GUITAR: Designed for acoustic and electric guitars with radiused fretboards..
  • BUZZ FREE CAPO: Micrometer tension adjustment assures buzz-free in-tune performance at every fret..
  • ONE HAND OPERATION: Change fret positions quickly with the micrometer adjustment mechanism..
  • DURABLE CAPO CONSTRUCTION: The capos molded with durable ABS thermoplastic construction. Design offers lightweight, ease-of-use, and superior functionality at an affordable price..
  • FOR 6 STRING GUITARS: Designed specifically for 6 string acoustic and electric guitars. Not recommended for use on 12-string guitars.
Check Stock

Allegro MU4500 Champion - 6,000 Square Foot Home Central Vacuum System 35 Foot Electric Powerhead Hose Kit

  • ...lescopic Extension Wand, Cleaning Tool Set. Hose Cover, Dust Mop, Full Garage Kit (includes 30 foot hose and cleaning tools), and Tool Bag - Central Vacuum Exhaust Muffler..
  • ✅ Permanent Self-Cleaning Maintenance-Free high Permeability Micro Fiber Filtration System - This patented material traps dirt particles of 3 micrometer in size with 99.98% efficiency rate (3 micrometer is less than 1/10 of the average thickness of human hair)..
  • ✅ Tangential Discharge Bypass Blower Motor: Bypass system means that the motor and fan (pump) system are totally segregated allowing cool and clean motor ambient. Separate fan system maintains motor operating temperature improving reliability. The Tangential discharge feature will allow the vacuumed air to be fully exhausted to the outside environment. Ultimate Performance - High Efficiency High Performance Motor..
  • ✅ GUARANTEED FOR LIFE against corrosion perforation. The entire unit is baked epoxy Powder Coat finish inside and out . 5 Year Manufacturer's Motor Warranty..
Check Stock

uxcell Metric Outside Micrometer, Measurement Tool Measuring Tool (a13060500ux0130)

  • Product Name : Metric Outside Micrometer.
  • Overall Size(Approx) : 128 x 50 x 19mm/ 5.0" x 1.97" x 0.75" (L*Max.W*Max.T).
  • Box Size : 140 x 65 x 25mm/ 5.5" x 2.6" x 0.98" (L*W*T).
Check Stock

Waterfalling in Wisconsin – Updated Edition

  • Please refer User manual in technical description for any troubleshooting steps.
  • The Krome's "softer" trigger tension allows for greater detail triggering control, and the micrometer trigger stop setting allows the user to set and reference spray patterns to 1/1000 of an inch.
  • An ergonomic under body finger rest was added for greater comfort during prolonged detail finishing sessions.
  • Airbrush set includes an ultra-fine Krome airbrush with a 3/8 oz. mounted color cup, an additional fine tip, fine spray regulator, and fine needle.
  • The RK-1 Krome airbrush is packaged in a sturdy, handsome storage case.
  • Badger airbrushes are proudly made in America.
Check Stock

Fowler 52-243-212-1, Inside Tube Micrometer With 2-12\ Measuring Range

  • Each set consists of an inside micrometer head and a series of fully hardened and lapped extension rods of different lengths.
  • Anvil and spindle are hardened and precision ground with microcap finish on ends.
  • Spindle thread hardened, ground and lapped.
Check Stock

ARES 43011-1/4-Inch Drive Micrometer Torque Wrench - Dual Torque Scales - 40-200 in/lbs (4.52-22.6Nm) - Click Torque Wrench - Ultra Smooth Torque Dialing with High Visibility Laser Etched Markings

  • ITEM SPECIFICATIONS: The ARES 1/4-Inch Drive Micrometer Torque Wrench features dual torque scales with in/lbs and newton meters readings and ranges of 40-200 in/lbs and 4.52-22.6 Nm with an accuracy tolerance of ±3%. The ultra smooth handle rotation with high visibility laser etched markings makes it easy to adjust your specified torque. Designed with longevity in mind, all of our torque wrenches are calibrated before shipping and meet ANSI standards..
  • DESIGN CONSIDERATIONS: This click type torque wrench is designed with ultra smooth torque dialing, and the quick torque change mechanism features a spring loaded pull down knurled collar that secures the torque setting with a positive lock mechanism. The quick release mechanism helps you dial in your torque setting effortlessly and instantly. The click type design alerts you when torque is reach and helps to prevent over-torquing..
  • CONVENIENT STORAGE: This click type micrometer torque wrench comes with a high quality storage case, so you'll always have the perfect place to keep it while it's not in use, and you'll never have to search for it when you need it. This torque wrench features a black nickel finish on the shaft and ratchet, and a red anodized finish on the aluminum machine knurled handle. The ....
Check Stock

Megaforce

  • 1 x 2.5mm Nozzle (1 nozzle was pre-installed to the spray gun).
  • 1x True Micrometer Air Regulator with Gauge.
  • This spray gun set is designed to provide equal atomization and partical size for all kinds of surface painting..
  • It has control knobs for full adjustment over spray pattern, fluid control and air pressure. Contains 1.4mm/1.7mm/2.5mm stainless steel needles and nozzles set to meet your different applications.
  • Light weight, ergonomic design and easy trigger pivot reduces operating fatigue..
  • Ideal for spraying base coats, clear coats and other high viscosity coatings such as extreme high build or polyester primers, thick enamels, latex paints, chip guard, metal flakes, gel coats, liquid mask, etc. Two years warranty..
Check Stock