ReviewsMid Frequency

Allen & Heath ZED-14 - 14-Channel Touring Quality Mixer with USB I/O (AH-ZED-14)

  • ...ophones and up to 69dB of gain. Each preamp uses two gain stages to provide a full and accurate sound across the entire gain range with enough power for even the most gain hungry mics..
  • A 100Hz High Pass Filter on every mono input allows unneeded low frequencies to be removed, then the 3-band MusiQ EQ with swept mid frequency uses carefully selected frequencies to ensure your sound sculpting is always musical. Cut or boost highs and lows with shelving EQ and use the mid frequency selection to choose exactly where to adjust the mid frequencies, especially useful for vocals, guitar and other instruments with a rich mid-range..
  • Two ‘Pre-Fade’ Auxiliary outputs enable separate mixes to be sent to monitor speakers or any feeds that require a mix of channels independent of the main mix. Another two ‘Post-Fade’ Auxiliary outputs sends signal at a level which follows the send level to the main mix, ideal for use with external FX units, feeds to subwoofers or creating a mix for streaming or recording..
  • A routable stereo-in stereo-out USB connection makes it easy to record the whole main mix or just the channels you need and enables a stereo return from the connected device to be routed back to the mix. It’s also class compliant and does not r....
Check Stock

Behringer SL 75C Dynamic Cardioid Microphone

  • Smooth mid-frequency presence rises for excellent voice, drums and guitars.
  • Ultra-wide frequency response for brilliant and transparent sound.
  • Extremely high signal output lets your performance cut through.
  • Cardioid characteristic minimizes background noise and feedback.
Check Stock

Behringer SL 84C Dynamic Cardioid Microphone

  • Dynamic vocal microphone with smooth mid-frequency presence.
  • Ultra-wide frequency response for brilliant and transparent sound.
  • Extremely high signal output lets your voice cut through.
  • Integrated spherical wind and pop noise filter.
  • three- pin XLR connector for highest signal integrity.
Check Stock

Cerwin-Vega Home Audio XLS-6 Bookshelf Speakers – Black

  • 6.5″ Woofer with Fiber Impregnated Cone.
  • Proprietary Mid and High Frequency Waveguide.
Check Stock

Audiopipe APMB-8 8 Inch 500 Watt 8 Ohm Low/Mid Bass Frequency Car Audio Loudspeaker with 2 Inch TIL Voice Coil 4 Pack

  • PRO-AUDIO PERFORMANCE: Designed to provide pro audio quality sound in the comfort of your vehicle with 500 watts MAX power, 250 watts of RMS power,....
  • 8-INCH MID-RANGE SPEAKER: 8-inch midrange driver speaker designed to bring you the sound you've been searching for with low/mid-frequency capability.
  • BUMPING SOUND QUALITY: 35-ounce magnet with 2-inch TIL voice coil work together to give you bumping sound.
  • Bullet dust cap ensures high-quality,....
  • DURABILITY AND PROTECTION: Die-cast aluminum basket, pressed paper cone, and corrugated surround provide improved speaker life and enhanced sound.
  • SPECIFICATIONS: Frequency response: 65 to 6,000Hz.
Check Stock

Origin Effects M-EQ Driver Mid Booster and Drive Pedal

  • Mid Booster Overdrive Pedal with 3-way Mid Frequency Switch Adaptive Circuitry.
Check Stock

Volumes, amplifiers, equalizers

  • The EX 3000 is an equalizer with three bands: BASS, MID BASS, MID HIGH beyond traditional resources Level, High Pass and Low Pass..
  • Frequency response of 10Hz to 10KHz and Cooler controlled intelligent system.
  • The Digital Signal Processor DSP 2.8 X features crossover: Input Channels: 2 / Output Channels: 8.
  • Graphic Equalizer: 15 Band / Graphic Equalizer Presets: 12.
  • Parametric Equalizer Input:1 / Parametric Equalizer Output: 8 / 1 per Channel.
Check Stock

BIC America Venturi DV64 2-Way Tower Speaker, Black (Single)

  • You Will Receive: 1 PL-980 Left 3-way Floor Speakers..
  • Their imaging and lifelike sound is as if looking through the performance stage front to back, very much like what is experienced audibly and visually at a live performance..
  • Perfect for both music and home theater applications, each PL-980 incorporates two high power 8” active woofers which deliver low frequency output..
  • The midrange is a 5" closed back driver which delivers the all-important 1000Hz – 5000Hz articulation frequency range..
  • The 6.5” mid/high frequency horn tweeter produces rich detailed clarity and effortlessly achieves staggering high output to 119 dB (live rock band levels)..
Check Stock

JOYO Metal Distortion Pedal with 3 Band EQ and Low-Mid-High Gain Boost for Electric Guitar Effect - Bypass (Extreme Metal JF-17)

  • JOYO Extreme Metal distortion guitar pedal with adjustable 3 band EQ and sweep Mid-Freq knob, provides a strong low frequency and clear, transparent high frequency..
  • Adjust for shaping frequency response: "High", "Mid", "Low", "Boost", "Level" and "Drive" 6 control knobs, independent EQ controls, allowing you to achieve metal, rock and punk sounds..
  • Where this pedal is most at home is with the gain at 12 'o' clock or higher. At 12 'o' clock you get some brilliant hard rock tones. With the gain set at around 9 'o' clock using a bridge position humbucker you can get some excellent classic rock tones..
  • JOYO is over decade of brand reputation, with the most popular budget pedals, amplifiers, wireless systems, controllers, metronomes, tuners winning the love of global guitarists and inspiring people's music dreams..
  • Before playing, please make sure the guitar is fully connected with the pedal. in order to make JOYO pedals work properly and avoiding unexpected noise, we recommend you to purchase an extra JOYO original power....
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Gloss Black (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
  • Frequency Response: 35–25,000 Hz ±3dB, Recommended Amplifier Power: 20-400 watts per channel.
  • Horizontal Dispersion: 80°, Vertical Dispersion: 30°, Sensitivity: 94 dB/2.83 volts/meter.
  • Impedance: 4 Ohms Compatible with 4, 6, or 8 Ohm rated amplifiers..
  • Weight: 66 lbs., Dimensions: 48" x 11.4" x 14.4".
Check Stock

MartinLogan Motion 60XTi Floorstanding Speaker Red Walnut (Each)

  • High Frequency Transducer: 1.25" × 2.4" (3.2cm × 6.1cm) Folded Motion XT Transducer with 4.5" x 2.75" (11.4cm × 7cm) diaphragm.
  • Mid Frequency Transducer: 6.5” (16.5cm) aluminum cone with cast polymer basket. Sealed chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Low Frequency Transducer: Two 8” (20.3cm) aluminum cone with cast aluminum basket. Non-resonant asymmetrical chamber format. Rigid structured dust cap to reduce cone break-up modes..
  • Components: Custom air core coil and low DCR steel laminate inductors. Polypropylene film capacitors in series and low DF electrolytic capacitors in parallel. Tweeter thermal/current protection..
  • Inputs: Custom 5-way bi-wire tool-less binding posts.
Check Stock