ReviewsMig Welder 250amp

SereneLife MIG Welder Flux Core Welding Machine with Gas and No Gas, 130A DC 110V 220v IGBT Inverter Welder with Automatic Wire Feed, Welding Gun, Ground Wire, Brush, Mask, Dual Voltage Adapter

  • 130 AMP MIG STYLE WELDER: Mig welder is easier for beginners than tig or stick style welders. Includes welding gun, ground wire clip (1.6m), Included accessories, cleaning brush, protective mask, 110v adapter.
  • GAS OR FLUX CORE: Digital MIG Welding Machine uses 0.6-0.8mm flux-cored wire. Can also be used with gas setup.
  • FULL BRIDGE CIRCUIT: Full bridge circuit provides professional level stability. Make sure to avoid models with only half bridge circuits. 60% rated duty cycle allows you to weld for six minutes then rest for four minutes.
  • DUAL VOLTAGE 110V/220V: MIG welder includes 220v plug and 110v adapter, machine features up to output that allows you to weld steel up to 0.08” plate steel. Supports, wire feeder 24V w/ 0.7KVA/1.8KVA maximum and minimum power.
  • ADJUSTABLE SPEED WIRE FEED: Adjust up to 6.7m per minute, dial in the perfect weld. Test data supports stable performance & output voltage. Automatically adjust the inverter pulse width through closed-loop control to ensure output stability.
Check Stock

WeldingCity 100-amp 10-ft Air-cooled MIG Welding Gun Torch Stinger Replacement for Miller Millermatic MIGmatic M-Series M-100/M-10 (248282)

  • Premium quality 100-amp/150-amp/250-amp with 10-ft, 12-ft and 15-ft cable air cooled MIG welding gun, ideal replacement for Miller MIGmatic M-series. Control cable is with 2-pin Amphenol type terminal..
  • M-series MIG gun M-100/M-150/M-25/M-40 can be found in many Miller machines like Millermatic, DVI, Passport, Challenger, Pulser, Vintage or Hobart IronMan, etc. See all listed pictures for details of front consumables, rear plug and control cable type. CHECK YOUR WELDER MANUAL FOR MATCHING..
  • Referenced part number from Miller: 248282 (M-100/10-ft).
  • Front consumables come with 000068 (0.035") contact tip, 169715 (M-100/M-150) and 200258 (M-25) nozzle, 169716 (M-100/M-150) and 169728 (M-25) gas diffuser, 169729 (M-25) nozzle adapter and 194011 wire liner. Current rating: 100A, 150A and 250A.
  • Cable length: 10-ft, 12-ft and 15-ft. Control cable terminal: 2-pin Amphenol type..
  • U.S. based welding and hardware supplier. Strong technical support with experienced customer service to address buyer's any question..
Check Stock

HITBOX 200A MIG Welder New Arrival 4 in 1 Flux MIG/Solid Wire/Lift TIG/Stick/Gas Gassless Multiprocess Digital Welder 110 / 220V Dual Voltage IGBT Inverter Welding Soldering Machine

  • Synergic Control & Non-noise: The welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.the fan with automatic temperature control makes the machine run very quietly.
  • Powerful Machine: Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate. Both 0.030" and 0.035" flux-cored wires can be used. In addition to regular metals,HITBOX mig250 can also weld Aluminum alloy with graphite conduit to alleviate any kinks or jams.
  • [Spool Gun/Aluminum Welding Opinion] HITBOX MIG250 supports welding with a spool gun and can also weld Aluminum alloy with graphite conduit to alleviate any kinks or jams(spool gun is not included).
  • Safety & Overheat Protection: The arc welding machine has a built-in protection device, and the engine will automatically shut down when overheated and overload..
  • 1 Year Warranty: HITBOX MIG250II welder offers good warranty. If you meet any problem when using this machine, please feel freely to contact us at the first time. Our 24 hours online customer service will help you fix it. Just buy HITBOX machines with confidence..
Check Stock

Eastwood MP250i Elite Multi-Process Welder | MIG - TIG - ARC Welding Machine Set | Rated Duty Cycle of 60% at 250 Amps| Black

  • MULTI-PROCESS WELDER: Operates on either 120 or 240V.
  • IGBT Inverter based power supply. MIG Welds thin steel metal or up to 1/2 inch steel plate.
  • TIG Welds chrome moly tubing or thin steel sheet metal or stainless up to 3/8 inch thick. Arc Welds up to 1/2 inch steel and stainless.
  • BEST USE: Our Eastwood MP250i Multi-Process 250 Amp Welder can be used to weld steel, stainless steel and aluminum with the use of our optional spool gun. It also has a dual voltage regulator that can operate through either 120 or 240V of power with a fully independent MIG and TIG Gas Systems..
  • EASTWOOD QUALITY: Eastwood offers solutions which combines our 4,000+ unique products with the know-how to “Do The Job Right”. With an In-house product design, development and testing and a strong track record of high-quality, innovative products. Used and trusted by top builders to beginners and also provides a Lifetime Tech Support..
  • SAFETY INFORMATION: Welding can be dangerous to you and othe....
Check Stock

Century 255 Flux-Cored/MIG Wire-Feed Welder 30-255 amp Output 230V Input

  • Wire-feed welder provides 30 to 255 amp output to weld a range of thicknesses.
  • Flux-cored wire feed welds on 18 gauge sheet metal to 3/16" thick steel in one pass and to 1/2" in multiple passes.
  • Includes nozzle for MIG welding (requires MIG wire, sold separately).
  • 20% duty cycle at 255 amps allows welder to run 2 minutes out of each 10-minute period without overheating.
  • Comes with a gas regulator and hose, work cable and clamp, gun and cable assembly, contact tips, and an input cable with attached plug.
Check Stock

Weldpro 155 Amp Inverter MIG/Stick Arc Welder with Dual Voltage 240V/120V welding machine, spool gun capable

  • The New Mig 155 GD is perhaps the most capable and versatile MIG welder in its class. Equipped with features designed to meet even the most demanding welding jobs while not breaking the bank. The 155 GD can perform MIG, flux core and DC stick welding as well as the ability to adapt scratch TIG with the optional TIG torch available through our website..
  • This latest version of our economy minded 155 amp MIG welder now includes the ability to remove the torch cable and replace it with our aluminum spool gun. After inserting the spool gun a simple flick of the switch inside the welders drive roller housing enables spool gun operation..
  • The MIG155GD can run .023, .030, and .035 MIG and flux cord wire. No need to disconnect electrical terminals change polarities. With the Mig 155 GD changing polarity is as simple as swapping the dongle cable from plus to minus dinse connector right on the front of the machine..
  • Packaged with multiple drive rollers, both smooth and knurled for flux core welding, a reel of flux core wire, and a gas regulator for MIG welding, along with a stick welding electrode stinger, the MIG155GD is ready to handle most any DC welding needs..
  • Portable, capable and versatile, still with the ability to run 120V as well as 240V this little ....
Check Stock

YESWELDER Plasma Cutter Welder Combo Gas MIG/Gasless MIG/Lift TIG/Stick/CUT 5 in 1 Welding Machine FIRSTESS MP200

  • Gas MIG/Gasless MIG/Lift TIG/Stick/CUT 5 in 1 Welder.
  • Can take up to 0.9mm(.035") MIG solid wire(Gas MIG) and 0.9mm(.035") MIG FLux wire(Gasless MIG)..
Check Stock

0.035 flux core welding wire 3 Spools E71T-GS Low Splatter gasless Carbon Steel Mig Welding Wire Compatible With HF Fourney Harbor Welder 3 PACK

  • MAKE WELDING FAST AND EASY: SONNLER welding wire is made of Premium quality AWS E71T-GS mild steel, which helps you easily finish the welding project. Suitable for Great for T-joints, butt welds & lap welds..
  • PROFESSIONAL PACKAGING: Each 2-Pound Spool of SONNLER welding wire is individually vacuum packed, waterproof and moisture-proof, which ensures that the welder receives the best effect of MIG weld wire..
  • EXCELLENT & STABLE PERFORMANCE: When using Sonnler 0.035" flux core welding wire, had great slag coverage great performance on clean metal, and minimal spatter, with almost no cleanup or slag removal. Optimize your welding work. It is absolutely good value for the money..
  • WIDE APPLICATIONS: The gasless flux cored wire is specially designed for MIG welding machines. It is compatible with HF welder Forney welder Lincoln welder. Also suitable for professional welders and beginner welders..
  • 7*24 SERVICE & PROFESSIONAL TECHNICAL GUIDANCE: If you have any questions, feel free to contact us. We have technical engineers with more than 20 years of work experience, who can help at any time..
Check Stock

HITBOX 5 in 1 MIG Welder 200Amp Synergic 110V 220V Multifunction Aluminum Inverter MIG ARC Lift TIG Gas Gasless MIG Spool Gun Compatible Flux Cored Wire Solid Core Welding Machine Equipment Upgraded

  • Multi-Process Welder :The latest version 5 in 1 Welder .Suitable for MMA/ARC, Lift TIG, flux MIG, gas MIG,Gassless Mig and also support spool gun welding .Up to 200A output current that can weld mild up to 5/32 inch (4.0mm) plate and extending the weld cable to 164FT does not attenuate the current.
  • Synergic Control & Non Noise: Equipped with a smart digital LCD display and the welding parameter is built-in with precise data. It will choose the voltage, amperage and feeding speed that is needed based on welder data, making it much easier for new welders.
  • [Spool Gun/Aluminum Welding Opinion] HITBOX MIG200II proceeded 2 way to do aluminum welding work . with package include graphite conduit liner you can alleviate any kinks or jams. also you can use Spool gun to do aluminum welding.(Spool gun not include).
  • Safety & Overheat Protection: The arc welding machine has a built-in protection device, and the engine will automatically shut down when overheated and overload.
  • No noise - When the welding machine exceeds a certain temperature, the fan will start.
  • 1 Year Wrannty】Test report issued by ISO 17025 certified Laboratory ，We have enough confidence in our products. If you meet any problem while using, please contact us firstly, you will get efficient....
Check Stock

Weldpro Spool Gun 15' for Weldpro MIG200GDsv 200 amp MIG welder and MIG155GD removable torch welder

  • The Weldpro Spool gun comes complete with a 2 LB Spool of .030 inch aluminum wire. Designed with backend connector to fit our MIG200GDsv 200 amp MIG welder and also our new version MIG155GD removable torch welder..
  • American SB8, with 0.9 contact nozzle on the gun, 13mm2 cable, 3m gun length, 16M-4A iron-sealed four-core, 12V SB8 wire feeder, 0.9-feeder wheel, with SB8 wheel-type welding gun American-neutral instruction manual, with 0.8/0.9 contact nozzle each, install SB8 white box, put SB8 outer carton..
Check Stock

Eastwood Mig Welder Consumables Kit Contact Tip Set Torch Gun & Gas Nozzles in Plastic Storage Case

  • Kit Includes A Complete Set Of Consumables For Your Eastwood Mig135 Or Mig175 Welder Or Any Other Mig Welder With A Tweco-Style Torch..
  • With 20 Contact Tips (Ten 0.023 in./0.6 Mm And Ten 0.030 in./0.8 Mm).
Check Stock