ReviewsMild Steel Angle Bars

Wisamic 11 Pcs 5/16 inch Carbide Tipped Cutter Set for Metal Lathe Turning, Boring, and Chamfering

  • 2 pieces: 4-7/8" long Cranked Boring Bars.
  • Made of drop forged tool steel with tungsten carbide tips..
  • Can be resharpened & reshaped for many times..
  • Suitable for machining mild steel brass copper and plastics..
  • For metal lathe, mini lathe, milling other general machining operations such as turning & boring..
Check Stock

Speedway Motors Replacement Door Bar Kit for Roll Cage

  • 1 3/4" diameter .104 wall HREW 1020 mild steel tubing.
  • Total length is 45" on the long end and 32" on the short.
  • 7" wide and 7" from the elbow to the end.
Check Stock

KinRite 20 pcs Cutting Tools Indexable Inserts Turning Inserts DCMT32.51 DCMT32.52 Carbide Inserts for Metal Cutting Cutter bar 20pcs DCMT11

  • Pacake includs: 20pcs DCMT Inserts (5pcs brozun DCMT32.51 +5pcs yellow DCMT32.51 +5pcs brozun DCMT32.52 +5pcs yellow DCMT32.52).
  • 55° Diamond shaped single sided TIAIN coating carbide turning inserts , mainly used for steel, stainless steel finishing, semi-finishing and rough machining..
  • DCMT32.51--Relief Angle : 0.4, DCMT32.52--Relief Angle : 0.8, Cutting angle: 55°, Blade length:11mm, 5/32" Thickness ,1/64" Radius, With chipbreaker.
  • With continuous processing function, Used for turning and finishing on a wide range of materials.
  • Macthing for SDJCR11 /SDXCR11 tool holders /boring bars.
Check Stock

Yaxell Mon 3.25-inch Paring Knife

  • Blade core is made from 3-layer Japanese Cobalt Molybdenum Vanadium VG10 superior stainless steel, clad by high quality stainless steel from both....
  • Sand-blast finish blade and Katana sword wave line gives an impressive appearance.
  • Black resin and linen canvas Micarta handle with two stainless steel rivets.
  • Clean with warm water and mild detergent.
  • Handcrafted in Seki City, Japan with a lifetime warranty.
Check Stock

Yaxell Mon 4.75-inch Utility Knife

  • Blade core is made from 3-layer Japanese Cobalt Molybdenum Vanadium VG10 superior stainless steel, clad by high quality stainless steel from both....
  • Sand-blast finish blade and Katana sword wave line gives an impressive appearance.
  • Black resin and linen canvas Micarta handle with two stainless steel rivets.
  • Clean with warm water and mild detergent.
  • Handcrafted in Seki City, Japan with a lifetime warranty.
Check Stock

Yaxell Mon 10-inch Chef's Knife

  • Blade core is made from 3-layer Japanese Cobalt Molybdenum Vanadium VG10 superior stainless steel, clad by high quality stainless steel from both sides.
  • Sand-blast finish blade and Katana sword wave line gives an impressive appearance.
  • Black resin and linen canvas Micarta handle with two stainless steel rivets.
  • Clean with warm water and mild detergent.
  • Handcrafted in Seki City, Japan with a lifetime warranty.
Check Stock

LONGTA Wooden Stretch Stand, Pushup Stands Bars Calisthenics Handstand,Non-Slip Yoga and Gymnastic Training Tool Russian Style Stretch Push-Ups Double Rod (Black)

  • ☞【Premium Material】: No more wrist pain! The specially designed ergonomic wooden handle made of Natural hardwood ash bars is perfectly tailored to your hand, protects your wrists, is injury-preventing and offers in comparison to steel tubes a perfect grip even with sweaty hands.
  • ☞【Wear-resistant】: Set of two parallette workout bars for gymnastics, heavy Gauge powdercoated steel base..
  • ☞【Muscle development】 - The Push Up Bars are ideal for developing muscles in the chest, arms and shoulders. Can also build the abdominal core muscles..
  • ☞【Non Slip Design】: Non marring rubber feet, Special non-slip pads protect the floor and provide a secure standing for your workout, both at home, in the gym or outdoors. Detachable for easy storage and assembly..
  • ☞【Wide Application】: A full upper body workout angle tilting bar helps isolate different muscle groups. The bars also help you increase your range of motion, allowing you to go deeper into the push-ups and spacing to work the chest, shoulder, deltoid and triceps..
Check Stock

Utoolmart Deburring External Chamfer Tool Drill Bit Remove Repair Tool, High Manganese Steel 2pcs

  • 【Easy to Use】- Using the lowest speed on the drill bit, then slightly applying pressure to remove..
  • 【Material】- Made of High Manganese Steel material with better deburring effect, high strength and hardness..
  • 【Efficiency】- Quickly repairs damaged bolts and tightens the nuts in place, simplifies the repair process, eliminates the need to replace expensive or hard-to-find hardware..
  • 【Function】- The deburring outer chamfering tool can easily scrape the outer edge of bolts, pipes or bars to remove burrs..
  • 【Wide Application】- Effective on Stainless Steel, Hardened Steel, Mild Steel, Copper, Brass, Aluminum, Fiberglass, Wood, Plastic. Besides, it also can be taken as bottle opener..
Check Stock

Glideaway Heavy Duty Steel Bed Frame Center Support, Universal Metal Replacement Slats, for Wooden Beds, Extra Support for Bariatric Overweight Persons King Size with Non Slip Rubber Grippers

  • HEAVY DUTY: Glideaway’s BB King | California King Size with Rubber Grippers - middle cross rails supports more weight than any other traditional bed frame. Perfect for beds that include headboard, footboard, and wooden side rails and soft side waterbeds with a lip height of 8” – 18” inches from the floor.
  • PREVENT SAGGING: Heavy duty replacement slats are the best way to protect your mattress and box springs from sagging. This set comes with everything you need to install. 4 adjustable hardened steel telescoping support rails, 8 wood screws to fasten heavy duty bars to the wooden lip of the side rails.
  • SUPERIOR STRENGTH: Center supports bars are designed with 8 heavy duty steel adjustable legs that are bolted together and add super strength to cross supports plus 8 Non Slip Grippers to keep the bed from slipping on the floor.
  • TELESCOPING MIDDLE BRACE: Supports your mattress set using four 1 ½ angle iron cross support bars that run crosswise. Each bar includes 2 steel legs and 2 threaded adjustable feet per bar.
Check Stock

Benchmark Abrasives 6-1/2\ 48 Tooth Tungsten Carbide Tips Saw Blade for Thin Steel and Ferrous Metals Max. RPM 4600

  • Benchmark Abrasives blades have been designed to maximize performance on thin/mild steel and other ferrous metals..
  • Material applications include square tube, angle iron, thin steel plate, pipe, tube, rebar, flat stock and other ferrous metals..
  • Fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts..
  • Tungsten carbide teeth(TCT) provide excellent wear and heat resistance. Tougher tungsten carbide teeth stays sharper and have longer life..
  • The angle of the tooth scores the surface of the wood in advance of the cut, cleanly cutting the wood fibers before the following teeth remove the chip. This provides for a much smoother cut, with much less chance of splintering the surface of the wood..
Check Stock

Compatible with Dodge Dakota/Durango Front Bumper Protector Brush Grille Guard Black

  • ▶️ Mild Steel Alloy Construction / Black Powdercoated Finish.
  • ▶️ 1.5" OD Diameter Main Bars / Easy Bolt-In Application.
  • ▶️ Rubber Padding to Minimize Minor Impacts / Pre-Drilled Holes for Front Mounted Fog Lights.
  • ▶️ Non Abrasive Wax Recommended to Protect Finish.
  • ▶️ Trimming of Bottom Plastic Liner may be Required.
Check Stock