ReviewsMild Steel Pipe

VEVOR Pipe Stretcher Kit, Exhaust Pipe Stretcher Kit 1-5/8" to 4-1/4", Exhaust Pipe Expander Kit for Tail Pipe Tube, Exhaust Pipe Expander Tool w/Storing Case, 7 Pcs Pipe Expander, Exhaust Stretcher

...he handy collets and expander required to stretch tailpipes before making tight seals to pipes with smaller diameters..
Wide Expanding Range: The exhaust pipe stretcher kit provides various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: mild steel expander (1 5/8" - 1 7/8" collet, 2" - 2 1/2" chuck), and aluminum alloy expander (2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" collet, 3 1/8" - 3 1/2" collet, 3 1/2" - 3 7/8" collet, 3 7/8" - 4 1/4" collet)..
Easy to Operate: You only have to lubricate all parts of the exhaust expander tool, and attach sleeves as needed, and then insert pipe spreader into the pipe, and finally connect to existing drill..
Heavy-duty Construction: All collets are made of Aluminum alloy ensuring rugged rigidity over an extended service life. The coated surface of the exhaust pipe expander kit provides rust resistance..
Convenient Storage: Blow-molded carrying case included for easy storing and convenient carrying, no need worry exhaust pipe expander tool messing ....

Check Stock

ARES 48001 – External Rotary Deburring & Chamfer Tool (13-36mm) – 3/8-Inch Shank for Use with Drill or Hex Driver - Clean and Repair Threaded Fasteners, Studs, and Bolts

...amfer tool set includes debur tools covering external diameters of 1/8″-3/4″ (3-19mm) and internal diameters of 1/8″-5/8″ (3-16mm). Deburring chamfer tool set features quick release shank fits all handheld and stationary drills..
【Exquisite Crafts】The internal countersink chamfer is made of M2 high-speed steel, and the surface is black nitrided after heat treatment. The head of the external deburring chamfer is cast with zinc alloy, and the surface is black and bright electrophoretic treatment. 3 pieces of YG8 carbide blades provide better performance and longevity than high speed steel blades..
【Easy to work】Attaching the deburring external chamfer tool to the end of your power drill, Use the speed on the drill bit between 0-400 RPM, and then slightly applying pressure to remove the burr. Do not use impact mode..
【Safety Design】The accurate deburring external chamfer tool easily shaves the outer rough edge of bolts, newly-cut pipes or rods, removing burrs to keep edges smooth. Quickly repairs damaged bolts and tightens the nuts in place without hurting your hand, no sparks, and no burns.
Simplifies the repair process. The internal deburring tool with 5 flute bit design allows it drilling smoothly in metals, and it can even drill cou....

Check Stock

FOXBC 64-1/2 Inch Bandsaw Blades 1/2\ X 24 TPI for Cutting Mild Steel, Metal fit for Harbor Freight, Wen 3970, Jet Band Saw

64-1/2-Inch x 1/2" X 0.025 X 24 TPI Bandsaw Blades.
Perfect Fit for WEN 3970, Grizzly G0622 , Harbor Freight, JET Model: HBS-56S (414301) 414458 HVBS-56M 414457 Horizontal/Vertical Band Saw POWERTEC , Shop Fox W1715 , SKIL, RIKON, Sears Craftsman, BILT HARD 4"" x 6"" Metal-Cutting Band bandsaws requiring a 64-1/2" long 1/2" wide blade.
Recommended for cutting Mild Steel ,aluminum, angle iron, bronze, brass, copper, galvanized pipe, mild steel, and tougher steels including stainless, chrome, tungsten steel, plus other problem material at slow speed. However, it's also sharp and diverse enough to handle some hard plastics and all wood based projects..
Perfect for soft metal, Wood, Stainless Steel, Aluminum, Brass, Plastic.
Fits all requiring a 64-1/2" long 1/2" wide Metal-Cutting Band Saw.
Bi-Metal HSS M42 grade, 8% Cobalt Content For Added Durability & Wear.
Unique welding technique :strong and smoother welding point.

Check Stock

ORXPLUS Tools 5 Flute Metal Countersink Drill Bit, 90 Degree Quick Release Shank Fits for 1/8'-3/4'(3mm-19mm)

Designed to clean internal pipe ends quickly and safely. Made of alloy steel, cutter to remove damaged metal and burrs..
Applicable for use on hole from 3mm to 19mm in diameter.
Features a 1/4" quick change Hex shank fits all handheld and stationary drills.
Multiple Application - Suitable for use including stainless steel, hardened steel, mild steel, copper, brass, plastic and many more.

Check Stock

Krator 2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit - 48" Straight, 90 Degree, 45 Degree, 180 Degree U-Bends Pipes

2.5" Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit.
These exhaust bend kits include enough tubing to allow you to run your own exhaust system the way you want it..
Each pipe is expanded on one end to allow easy installation..

Check Stock

Lichamp Manual Knockout Punch Kit, Heavy Duty Metal Sheet Knock Out Box Hole Cutter Conduit Punch Driver Die Set

Sheet Metal Knockout Punch Kit, perfect for mild steel under 10 gauge (3.5mm), such as sheet steel, copper, aluminum, brass, fiberglass, some plastics, electrical pipe, quazite, conduit (NOT FOR Stainless Steel, Wood, Drywall).
Heavy Duty Classic Hole Punch Kit, forged, machined and heat treated high carbon steel construction..
Economic Knockout Punch Driver Set, complete conduit punch set include 4 dies, 4 hole punches, 2 bearing driving bolts.

Check Stock

Krator 2.25 Mild Steel DIY Custom Mandrel Exhaust Pipe Straight & Bend Kit - 48 Straight 90 Degree 45 Degree 180 Degree U-Bends Pipes

Universal kit includes all the necessary 2-1/2" exhaust pipe bends and straights to allow you to run your own custom exhaust systems.
Natural, anti-rust coated finish. Constructed of mild steel.
Each pipe is expanded on one end to allow easy installation.
4X180 Degree U-Bends. No clamps or hangers are included..

Check Stock

OEMTOOLS 25440 Professional Tube Bending Pliers Bends Brass Copper Steel and Aluminum Brake Lines of Diameters 5/16 3/8 3/16 and 1/4 Steel

BRAKE LINE BENDER: This tube bender is ideal for working on brake lines.
Brake line bending tool is designed to bend brass, copper, steel, and aluminum brake lines.
Tubing benders can make left, right, and offset bends up to 90-degree angles.
DUAL-SIZED ADAPTERS: The brake tube bender comes with two dual-sized adapters for different sizes of brake line diameters.
Pipe bender tool works on 1/4 inch, 5/16 inch, 3/16 inch, and 3/8 inch diameters of mild steel and soft tube material.
MINIMIZES DAMAGE: Our brake line tube bender features forged separators with knife edges to minimize damage to parts.
Safe soft copper tubing bender and metal tubing bender for any brake line kit.
Excellent tubing pliers for mild steel pipes and tubes.
HEAVY DUTY MATERIAL: These tubing bender pliers are made of alloy steel for additional strength and durability, ensuring these brake line forming pliers last for years to come.
Sturdy manual tubing bender makes the job much easier.
BRAKE LINE PLIERS PRODUCT SPECIFICATIONS: Size: 10.5 Inches.
Two Dual-sized Adapters for 5/16, 3/8, 3/16, and 1/4 Inch Brake Line Diameters.
Left, Right, and Offset Bends Up to 90-degree Angles.

Check Stock

VEVOR Hydraulic Exhaust Pipe Expander, 1-5/8" to 4-1/4" Size, 10 T Pedal Pump Included w/4 Dies and 2 Storing Cases for Copper, Aluminum Tubes in Car Repairing

Wide Expanding Range: The hydraulic exhaust pipe expander provides various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: mild steel expander (1 5/8" - 1 7/8" collet, 2" - 2 1/2" chuck), and aluminum alloy expander (2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" collet, 3 1/8" - 3 1/2" collet, 3 1/2" - 3 7/8" collet, 3 7/8" - 4 1/4" collet)..
Labor-saving Hydraulic System: This muffler pipe expander forces pipes to expand by using an air hydraulic mechanism. A 10-ton air hydraulic foot pump with a 6 feet high-pressure hose makes your expansion effortless..
Easy to Install & Operate: Different sizes of collet need to be matched with specified collets. Details are provided in the picture. You need to assemble the expanding part with a hydraulic mechanism and insert it into the pipe..

Check Stock

VEVOR Hydraulic Exhaust Pipe Expander, 1-5/8" to 4-1/4" size, 10 T Manual Hydraulic Pipe Stretcher w/4 Dies and 2 Storing Case for Copper, Aluminum Tubes in Car Repairing

Wide Expanding Range: The hydraulic exhaust pipe expander provides various collets for a broad expansion range from 1-5/8" to 4-1/4". Includes: mild steel expander (1 5/8" - 1 7/8" collet, 2" - 2 1/2" chuck), and aluminum alloy expander (2 3/8"- 2 3/4" Collet, 2 3/4" - 3 1/8" collet, 3 1/8" - 3 1/2" collet, 3 1/2" - 3 7/8" collet, 3 7/8" - 4 1/4" collet)..
Labor-saving Hydraulic System: This muffler pipe expander makes pipes expand by using a manual hydraulic mechanism. The hydraulic tool is designed with exquisite details, such as a 4 feet high-pressure hose and no-leakage oil cylinder. Pressure: 10 tons..
Easy to Install & Operate: Different sizes of collet need to be matched with specified collets. Details are provided in the picture. You need to assemble the expanding part with a hydraulic mechanism and insert it into the pipe..
Heavy-duty Construction: All collets are made of Aluminum alloy, ensuring rugged rigidity over an extended service life. The coated surface of the exhaust pipe expander kit provides rust resistance..

Check Stock

Universal 2.5 Inches OD DIY Custom Pipe Kits, Straight & 45 / 90 Degree & U-Bands, 16-Pieces, Mild Steel

Product Description - These are DIY custom pipe with 2.5" depth flared slip fit end..
Best Replacement - Come with set of [4] 90 degree pipes, [4] 45 degree pipes, [4] 180 degree u-bends and [4] 48" straight pipes, can make the replacement for your old and rust pipe..
Extraordinary Quality - It is constructed of high quality mild steel construction with mandrel-bends for strength and rust-resistant, to ensure an extremely long lasting operate life..
Brilliant Characteristic - It is high performance racing design with slip fit, joint to provide easiest fabrication, can maximize smoothest high exhaust air flow rate..
Product Specification - Overall Diameter: 2.5" | Inlet / Outlet: 2.5" OD | Flange Type: Slip-Fit | Thickness: 16 Gauge.

Check Stock