ReviewsMilling Equipment

4 Pieces 1/2\ X 1\ ALUMINUM 6061 FLAT BAR 12\ long +.07\/-0 T6511 Extruded Bar Mill Stock (Not Polished)

  • STURDY MATERIAL - This solid mill stock adopts 6061 aluminum as raw material, which is has high corrosion resistance and excellent weight-to-strength ratio. It's precisely cut by professional equipment, with neat cuts and smooth surface..
  • EASY TO MACHINE - 6061 general purpose square aluminum bar that can easily be machined or welded. it is suitable for milling or lathe work in a variety of applications and industries to obtain aluminum rods with a better finish..
  • ABOUT SIZE - The aluminum flat bar is 1x1 inch square and 12 inches long, which is long enough and easy to cut to size to meet your different project needs. It can be used as a spacer or for repairing or modifying equipment..
  • WIDE APPLICATION - 1 x 1 inch aluminum flat bar is widely recognized in the industrial processing and manufacturing industries. it's used in fixtures, tower buildings, mechanical equipment and other construction applications that require strength and weldability..
  • WORRY-FREE PURCHASE - If you have any dissatisfaction with our square aluminum solid bar within 30 days after receiving the product, you can contact us for a refund. Feel free to email us and let us know if you have any questions or feedback about our product. We are dedicated to providing you a satisfactory shop....
Check Stock

Blossoms & Steel (Seaside Pointe Book 1)

  • The milling cutter disk has the advantages of cutting labor and can mill the step surface. During milling, the stress points are along the direction of rotation of the milling cutter, and the downward force is small, and the product is not easy to deform when milling thin strip products..
  • Hardening and hardening High-precision shock resistance, good permeability, resistance to multiple impacts, good low-temperature impact toughness, sturdiness and durability, which can increase the service life and shock resistance of the cutter head..
  • The all-steel cutter body of the steel milling cutter is your savior for the main shaft, allowing you to reduce the load on the processing of the load..
  • Strict wire jointing, strong compression force, screw offset tightening design, so that the blade position groove and the blade closely fit together, the rigidity is enhanced, and the processing effect is good..
  • High-hardness treatment Strong and durable, the surface of the cutter head is treated with a new thin coating treatment liquid for high-hardness treatment, and has good acid resistance..
Check Stock

ACTOOLS Lathe Milling Vertical Slide & 50 mm Self Centering Vise Vice-Engineering Tools

  • Lathe Vertical Milling Slide T-Slotted Caste Iron Bed of 125 mm X 100 mm in milling slide.
  • Vertical milling slide movement is approx 80 mm. Has 3 T- Slots on Table 10 mm Wide at the top of the T is 15 mm wide at the bottom of the Tee allows milling on your lathe machine.
  • Hardened Jaws with Horizontal / vertical Vee.
  • Maximum Jaw Opening 55 mm, Jaw Depth 28 mm.
  • Supplied with a 50 mm Caste Iron Self Centering Vice.
Check Stock

LGXEnzhuo Manually Operated HDPE Butt Fusion Welding Machine 4 Clamps Pipe Fusion Welder Manual PE PP PB PVDF Pipe Hot Melt Machine 110V 63-160mm

  • ... 【PARAMETER】Model No.:2.48"-6.30" (63-160mm) 4 clamps.
  • Welding level(Φ, mm)outer dia: 2.48" (63mm), 2.95" (75mm), 3.54" (90mm), 4.33" (110mm), 4.92" (125mm), 5.51" (140mm), 6.30" (160mm).
  • 【FEATURES】Features of manual hot melt butt welding machine: It consists of four parts: frame, milling cutter, independent heating plate, milling cutter and heating plate bracket.
  • 【HIGH QUALITY】The heating plate adopts an independent temperature control system and is coated with PTFE.
  • The main part of the frame is made of aluminum alloy material, which is simple in structure, compact and easy to use.
  • 【EASY TO USE】Electric milling method is adopted, with single and double-sided milling functions.
  • the milling inserts are made of high-quality tool steel, double-edged design, and can be used on both sides.
Check Stock

Milling Cutter, Dovetail Groove Carbide Cemented Straight Shank 6 Flute Dovetail Cutter End Mill Slot Milling Cutter

  • High quality: The milling cutter is made of cemented carbide with high hardness and good wear resistance..
  • Unique design: The effective cutting edge of the milling cutter is 6, and the compact and practical design makes its work more stable..
  • No burr: The main body of the milling cutter is integrally formed, the surface is smooth and burr-free, and the manufacturing size is accurate..
  • Easy to use: the installation of the milling cutter is very convenient and easy..
Check Stock

Nema23 CNC Stepper Motor 425oz-in 112mm 3A 2.8N.m 1.8° 4 lead wire for CNC Router Engraving Milling Lathe Machine

  • Very High Torque 2.8Nm (425oz.in) holding torque.
  • Model Number:23HS2430 Application 1:Semiconductor Equipment.
  • Application 2:Milling Machine, Engraver Machine.
Check Stock

QWORK Hand Wheel with Revolving Handle, 3.94\ Round Removable Hand Crank Revolving Handwheel for Woodworking, Printing, Machinery

  • Package contents: 1 x Round handwheel (mounting screws not included)..
  • Overall Handwheel Diameter: 100 mm/3.94 in, Center hole diameter: 12 mm/0.47 in., keyway width: 4 mm..
  • Design: Swing handle, handwheel with threaded holes, easy to install and remove.
  • Easy to Insatallation: The hole size conforms to the standard shaft diameter and can be removed by tapping..
  • Application: Suitable for printing, woodworking, machinery,packaging equipment, hardware tools, especially for industrial machine tools, such as milling machines, lathes, grinding machines, etc..
Check Stock

GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting,HRC15°-55°.
  • ☞ Advantage:High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ,90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock

Led Holder, Reliable LightEmitting Diode Holder, Fire‑Proof Led Light For Protecting Led Light

  • Meanwhile, Such Ball Screw Nut Bracket Is Suitable For Sfu2005 / Sfu2010 Ball Nut..
  • The Ball Screw Nut Bracket Is Made Of HighQuality Aluminum Alloy Material, Which Is Durable And Securely Locked..
  • Wide Range Of Application Helps Ball Nut Bracket Suitable For Lathes, Grinders, Milling Machines, Drilling Machines, Comprehensive Processing Machines And Edm Machines..
  • Also, Such Cnc Ball Parts Can Be Fit For Boring Machines, Wire Cutting Machines, Accuracy Measuring Instruments, Woodworking Machinery, Loading And Unloading Machines And Transportation Equipment..
  • Entitled With Practical Adoptability, Screw Nut Bracket'S High Quality Can Keep Its High Performance For A Long Time..
Check Stock

GBJ 90 ° Indexable End Mill Holder BAP400R C24-25-200 APMT1604PDER Carbide Inserts Machining Steel,Iron Square Shoulder Face milling Slotting Milling Arbor (400R C25-25-150-2T+APMT1604PDER-DP Gold)

  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting,HRC15°-55°.
  • ☞About the 400R C24-25-200 -2T (0.98" Shank) Milling holder: 40Cr MnTi ,0.98" shank diameter , 0.98" cutting diameter, 7.87" overall length. Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ,90° Cutting angle ,Screw down insert.
  • ☞ Advantage:High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Package: 1x 400R C24-25-200-2T Indexable End Mill with wrench + 10pcs APMT1604PDER ZM1135 colorful hardened carbide inserts.
Check Stock

Milling on the Drill Press (DVD, 4 Hours)

  • 【Much More Powerful】The motor power of RCOG-25V milling drilling machine has a 1100W brushless spindle drive motor providing tremendous torque and variable speeds from 50-22250 RPM continuously, with overload and overheating protection fuction.The noise of this motor is very low and it is very easy to maintain.So much power will make your work much more efficient..
  • 【Parameters】Metric Scale MT3 Milling Machine adopts high precision grinding all steel spindle with excellent strength grinding gear,X axis:18.9",Y axis:6.9",Z axis:11",it has own DRO for 3 axis.Headstock swivels 360 degrees.Max drilling diameter:0.9",Max Face screening capacity:2.5",Max vertical milling capacity:0.79",Distance from spindle to table:13.8",Spindle taper:MT3,Table size:27.5"x7.1".The speed display shows inch..
  • 【Micro-Feed Precision】Benchtop Milling Drilling Machine has a micro-feed function,the accuracy is up to 0.01'', only need to tighten the middle nut of the right hand wheel to achieve the micro-feed function, loosen the nut to achieve the manual up and down movement function.Integrated cross worktable,width is widened,with high pr....
Check Stock