ReviewsMilling Machine Engraving Bit

ER11 CNC Collet 3Pcs 1/8 inch 3.175mm 4mm 6mm Spring Collet Workholding Engraving Collet Milling Lathe Tool

  • ☑【Description】-These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine..
  • ☑【High Quality】-This Spring Collet Fine workmanship, good elasticity, high precision and run-out tolerance is less than 0.008mm..
  • ☑【Convience】-Each collet is marked clearly so you can easily distinguish them..
  • ☑【Best Choice】-Great collet for CNC milling lathe tool and work-holding engraving machine..
  • ☑【Note】-Collet must be placed into collet chuck nut before inserting into collet chuck..
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock

1/4 Inch Shank Router Collet Extension Rod Chuck Holder Extender Adapter Woodworking Milling Bit Convert 1/2-Inch & 1/4-Inch Shank Bits with ER20 Spring Collet 6.5mm 12.7mm, ER20 M Type Wrench Spanner

  • Made of high quality material, durable and practical to use.
  • High strength, good toughness, strong shock resistance. Make you more efficient to process products, suitable for woodworking trimming, milling, engraving machine..
  • Shank Diameter: 1/4"(6.35mm), Accept Shank Size: 1/4" & 1/2" Shank, Extend Length: 2-1/4".
  • This router collet extension chuck accepts both 1/4" and 1/2" shank router bits for converting and extending. Extend the bit to provide the full depth of cut and eliminate the dangerous..
  • Easy to Use- Place the router collet extension shank in the 1/4-inch router collet and the router bit shank in the extension collet and tighten both.
  • M Type ER20M wrench included. Need M Type ER20M wrench to tighten the collet..
  • Eliminate the dangerous temptation of withdrawing the shank from the collet, extend the bit to provide the full depth of cut instead of short shanking your router bits. Widely used, boring, milling, drilling, silk attack, sculpture, CNC, and other processing, for professionals and hobbyists demanding..
  • Package including: one 1/4 Inch shank collet extension, one ER20 6.5mm Collet, one ER20 12.7mm Collet, one M Type ER20M wrench.If you're not satisfied with our products for whatever reason, just contact us, we will try our best. Do not....
Check Stock

Micro Drill Bits - 10Pcs 0.3mm to 1.2 mm Tungsten Carbide PCB Print Circuit Board Tip Rotary Tool Jewelry CNC Engraving Drill Bits Set for PCB Circuit Board, Dremel PCB Jewelry Making (0.3-1.2mm)

  • PREMIUM MATERIAL - These mini drill bits are made of tungsten steel,carbide tipped drill bits with high hardness,high wear resistance, resistance to bending, anti-impairment.Replacements for your CNC machines and any Handheld tools..
  • MEET YOUR NEED - Cutting edge diameter of these PCB Drill Bit Set: 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.1mm, 1.2mm..
  • SHARP EDGE - End Mill Sets can milling groove and clean surface,a large scraps discharge space,little resistance and smoothly during the scraps discharge.These sets of tool can work quickly and cleanly..
  • IMPROVE ACCURACY - The end milling engraving bits with shape cutting edge,reduce cutting force and prevent drill broken,improve the drilling accuracy.Attention: Don't use on too hard material,like high hardness iron..
  • WIDE APPLICATION - The PCB drill bit sets are great for punching at printed circuit boards,cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
Check Stock

10pcs Triangular CNC Router Bits V-Bit, 30 Degree 0.1mm Engraving Bits, 1/8” Shank Nano Blue Coating Sharp Pyramid Bits for Acrylic Wood MDF Aluminum Lettering Sign Making

  • 【Wide Applications】It is widely used to engrave, drill, mill, cut and carve on hardwood, plywood, acrylic, plastic fiber, resin, PCB, aluminum and other material. Suitable for lettering and sign making..
  • 30deg 0.1mm V Bit】Shank size are 1/8 inch. 30 degree 0.1mm v-bit is commonly used in CNC engraving..
  • 【Triangular Engraving Bits】Triangular v shape can be used in 2D and 3D carving. Easy to remove chips, not easy to stick dust..
  • 【Longer Service Life】Nano blue coating strengthens the hardness so that the service life is extended and the bits are more durable and wear-resistant..
  • 【Durable & Well-made】Sharp cutting edge, no glitches on the surface. Ultrafine carbide material ensures its engraving and milling performance..
Check Stock

BONYTOOL Dovetail Milling Cutter HRC55 Coated Tungsten Steel Carbide Slotting End Mills 75° 60° 45° Chamfering CNC 4 mm -60°

  • Material: Tungsten steel, high hardness and good toughness.
  • Rugged construction, durable with long service life.
  • Milling cutter end mills machining hardness: HRC up to 55 degree.
  • Applicable machine tools: CNC machining center, CNC machine tool, engraving machine, fine engraving machine, high speed machine, etc.
  • Applicable materials: stainless steel, die steel, ductile cast iron alloy steel, mixing steel, titanium alloy, etc..
Check Stock

CNC Spoilboard Surfacing Router Bits, SIMILKY 1/2 inch Shank 2 inch Cutting Diameter, Slab Flattening Router Bit Planing Bit Wood Milling Cutter Planer Woodworking Tool

  • ...posites. (Avoid cutting black metal and non-wood materials such as steel, iron and sand)..
  • [APPLICABLE EQUIPMENT] Plus a turning Electrical and mechanical wood carving milling chuck connector from 1/2" to 1/4". Suitable for CNC and other automatic routers as well as hand-held and table-mounted portable routers. wood engraving machines, trimming machines, etc..
  • [APPLICABLE EQUIPMENT] Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machines, trimming machines, etc..
Check Stock

Fafeicy Carbide Chamfer End Mill, 3 Flute 60° Milling Cutter V Groove Router Bit Tungsten Steel CNC Carving Polishing Router Bit, for Plywood, Soft Wood(D4*60°*50L), Milling Cutter

  • The chamfering mill is mainly used for the 60 ° chamfer or conical hole of the workpiece, and the edges and angles of each surface are champened..
  • This hard alloy chamfered milling cutter unique single-piece design makes debris generated during the cutting process without clogging the tool..
  • The chamfering cutter is of standard size and can be used as aluminum-copper milling tool and engraving milling cutter bit..
  • This hard alloy chamfering cutter uses 3 flute design to complete the processing of tapered surfaces at a time, suitable for small cutting processing..
  • This chamfering cutter has a wide range of applications, suitable for hardwood, plywood, cork, oak, MDF and metal in HRC 55..
Check Stock

LAKIX CNC Router Machine, 4540 CNC Wood Router Machine with 500W Spindle 3-Axis Engraving Milling Machine for Woodworking Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

  • ✅Powerful 500W Spindle : 3-Axis CNC router machine will allow you do both caving and engraving, with powerful 500w spindle 21000RP, will allow you to engrave more harder materials such as acrylic plastic and wood, meanwhile greatly improve work efficiency. Engineered for home and business use..
  • ✅2-in-1 Wood Carving and Engraving Machine : LAKIX CNC router milling machine compatible with spindles and laser module, will allow you do both engraving and caving, pls note our machine comes only 500w spindle , laser module is not included..
  • ✅ Large Engraving Area & Upgraded Offline Control : LAKIX CNC Router Machine has large effective engraving working area 430mm x 390mm x 90mm , LAKIX engraving machine cutter supports Win 7 / Win 8 / XP / Win 10 / Win 11, here is an option to use the offline controller that doesn’t require access to a computer..
  • ✅Sturdy Design : Excellent quality hardware,comes mostly pre-assembled aluminum metal structure , structured cabling, solid structure, smooth operation. The motor tolerates high speeds, will cut wood precisely and resists overload for a longer-lasting tool. It’s also quie....
Check Stock

20 Pcs Micro Drill Bit Set Micro Drill Bits Tungsten Steel PCB Print Circuit Board Flute CNC Router Bits Shank for Rough Stone Jewelry Punching Engraving (0.1-1.0 mm)

  • 【Premium Material】The micro drill bit set is made of high-quality tungsten steel, with high wear resistance, high hardness, not easy to bend, and has good milling and cutting performance..
  • 【High-precision Cutting Edge】The micro drill bit adopts a nano-scale spiral cutting edge, which reduces the cutting force, prevents the drill from breaking, and improves the machining accuracy..
  • 【0.1-1.0mm Multiple Sizes】This PCB drill bit set contains 10 different sizes: 0.1mm, 0.2mm, 0.3mm, 0.4mm, 0.5mm, 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, different sizes to meet different needs..
  • 【Easy to Use】Micro drill bits are designed with shock-proof design, stable and reliable engraving process, fast and clean work without burr, large chip removal space, low drilling heat, very practical..
  • 【Wide Application】These tungsten carbide drill bits are ideal for drilling holes in printed circuit boards, CNC engraving plexiglass, amber beeswax, bakelite, jewelry, plastic and other precision drilling..
Check Stock

PCB Drill Bits Set, Micro Drill Bits Set, 50pcs PCB Drill Bit Set Spiral Flute Carbide 0.3mm-1.2mm Drill Bits for Dremel Print Circuit Board Jewelry CNC Engraving (5PCS Each) by BOOTOP

  • ...ill bits are designed to drill and engrave on print circuit board and other precise work. The PCB Drill Bits are made of high quality tungsten steel, highly wear resistance, high hardness, bending strength, anti-impairment, highly working efficiency. Seismic design on the blade edge enables it to stay stable during engraving..
  • PCB Drill Bits Set are great for punching at printed circuit boards, 3D Printer Nozzle Cleaning, CNC engraving plexiglass, Amber beeswax, bakelite, jewelery, metal plastic and other precision drilling.
  • cutting and engraving and worked on Acrylic, PVC, Nylon, Resin, Fiberglass,etc..
  • PCB Drill Bit With sharp cutting edge, milling groove and clean surface, these sets of tool work quickly and cleanly, no glitches or scrap left. Package with high quality plastic box, easy carry and better protection keeps the blade tip goods in the delivery from being damaged..
  • 180 Days warranty. If you are not satisfied with our products,feel free to contact us for a replacement or refund. The PCB Drill Bits may also know as micro drill bits,NCN drill bits,micro drill bits set,plexiglass drill bit set,circuit board drill bits,pcb drill set,drill bits for dremel tool,small diameter drill bits, PCB drill bit set..
Check Stock