ReviewsMilling Machine Four jaw Chuck

CXOYLL Z011A 4-Jaw Chuck for Mini Lathe, Self Centering Mini Lathe Chuck with L-Shaped Wrench, Zinc Alloy Chuck Clamp Accessory Inner Clamping Diameter 1.8-56mm (Silver)

  • ...ds to be installed in the correct order, which is simple, fast, and convenient..
  • 【Package included】- 1 x Lathe Chuck, 1 x L-shaped Wrench.
  • The 4 Jaw lathe chuck is widely applied to Mini metal lathes for the general turning of shafts and some more delicate materials. It would be the perfect choice for your lathe machine..
Check Stock

Beall Collet Chuck, Wear-resistant and Durable Lathe Collet Chuck 10pcs NT40-ER32-70L for CNC Machining Center

  • As milling machine accessories, convenient to replace the broken one.
  • Scope of application: This milling chuck holder is used for CNC machining center.
  • This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
Check Stock

Beall Collet Chuck, Mill Machine Collet Wear-resistant and Durable with ER32 Wrench Collet Chuck Holder for CNC Machining Center

  • This package includes 1pcs milling chuck holder, 1 pcs ER32 wrench and 8pcs ER32 Collet.
  • As milling machine accessories, convenient to replace the broken one.
  • Scope of application: This milling chuck holder is used for CNC machining center.
Check Stock

PSI Woodworking CSCBARR52 Barracuda Insta-Change Jaw Chuck System

  • remove and replace all 4 jaws in less than a minute.
  • jaws will snap into place for a secure mount.
  • use the included jaw removal tool to pop them off the chuck body.
  • Instar-change jaw chuck system includes: barracuda chuck body, set of #2 round jaws, set of pen blank drilling jaws, woodworm screw chuck, jaw tightening key, jaw removal tool, storage case.
  • Barracuda chuck body: pre-threaded at 1" X 8TPI, weighs 4 lbs. , diameter 3. 5.
Check Stock

ER11 CNC Collet 3Pcs 1/8 inch 3.175mm 4mm 6mm Spring Collet Workholding Engraving Collet Milling Lathe Tool

  • ☑【Description】-These spring collets are made of high quality 65Mn spring steel for CNC milling lathe tool and work-holding engraving machine..
  • ☑【High Quality】-This Spring Collet Fine workmanship, good elasticity, high precision and run-out tolerance is less than 0.008mm..
  • ☑【Convience】-Each collet is marked clearly so you can easily distinguish them..
  • ☑【Best Choice】-Great collet for CNC milling lathe tool and work-holding engraving machine..
  • ☑【Note】-Collet must be placed into collet chuck nut before inserting into collet chuck..
Check Stock

4" Cross Slide Drill Press Vise, Heavy Duty Cast Iron Milling Vice Holder Woodworking Clamping Vise Machine Bench Top Mount

  • 【Provide Strong Clamping Force】: Widened jaws of the cross slide drill press vise for stronger clamping force to keep workpiece more stable during machining.
  • 【Heavy Duty Construction】: Constructed of heavy duty cast iron, ensures high hardness and durability, hardened steel jaws on the cross slide milling vice holder add for extra durability and longevity.
  • 【Double Direction Design】: Features with double direction design, can move in horizontal and longitudinal for precise positioning, removable handle of the milling vice clamping machine for easy slide on and off.
  • 【Easy to Use】: There are several mounting holes on the bottom of drill press vice for convenient fastening firmly in position, provide great stability and easy to use.
  • 【Versatile Milling Vice Holder】: Hinged vise crank handles drops out of the way, designed for woodworking and metalworking, widely used in milling machine, drill press and machinery maintenance, etc.
Check Stock

4 Inch 4 Jaw Mini Wood Lathe Self-Centering Chuck Set for Beginners Turning Wood Bowls Vases (1 Inch x 8TPI Thread)

  • PAKAGE LIST: Included Chuck body, a set of Tightening Levers, T allen wrench, Screw chuck.
  • FEATURES: Internal jaws tighten around workpieces varying from 1-1/2" to 3-3/8". External jaws spread inside of workpieces with pilot holes ranging from 2" to 3-7/8" Included screw chuck provides even more options for supporting your projects.
  • HIGH PERFORMANCE LATHE CHUCK:Our 4-inch 4 Jaws Lathe Chuck has the function of self centering with superior gripping force,it does not need to be repeatedly calibrated during clamping. It just needs to clamp the workpiece according to your needs, which is simple, fast and convenient.
  • WIDELY USED: Scroll chuck perfect for holding bowls, spindles, and other unwieldy wood lathe projects. Widely used for machine tools and accessories for general lathes and industrial machines.
  • FRIENDLY REMINDER: Definitely make sure you get it tight, Otherwise, It also loosens in the middle of your work, causing your project to fly off the lathe.
Check Stock

OrangeA K11-200 Lathe Chuck 8 Inch 3 Jaw,Self Centering Chuck Hardened Steel Jaws,Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.16" / 4 mm - 7.87" / 200 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

OrangeA K11-250 Lathe Chuck 10 Inch 3 Jaw, Self Centering Chuck Milling Hardened Steel, Internal External Grinding for Lathe Drilling Milling Machine

  • Quality Material: The lathe chuck body is made of high-quality hardened steel, and the hardness test of the jaws and guides is HRC58-62. It has high strength and toughness, compression resistance and durability, and long service life..
  • High Precision: The wood lathe chuck jaws and three jaws are self-centering, the alignment accuracy is less than or equal to 0.002" / 0.05 mm, and no adjustment is required after installation. The high precision design of the chuck bevel gear guarantees the accuracy of the chuck operation..
  • Double Jaw Chuck Jaws: Internal jaw is a positive L-shape, and external jaw is an inverted L-shape. The clamping range of this chuck is between 0.24" / 6 mm - 9.84" / 250 mm, which is suitable for clamping a variety of industrial parts..
  • Fast Clamping Speed: The 3 jaw lathe chuck has an automatic centering function, so it does not need to be repeatedly calibrated during installation. It only needs to be installed in the correct order, which is simple, fast, and convenient..
  • High Adaptability: The accessory screws make the scroll chuck highly adaptable and can be used with the same series of jaws as the chuck. This power lathe chuck is suitable for clamping various parts such as hanging shafts, disks, equilateral triangles, etc..
Check Stock

Mophorn High Precision Milling Vice 6 Inch,Bench Clamp Vise Nodular Cast Iron Material,Flat Clamp Vise Mill Vise for Milling Drilling Machine and Precision Parts Finishing

  • Clamp Capacity: High precision clamp vise with a jaw width of 5.9 inch (150 mm). Jaw opening: 6.3 inch (160 mm).
  • Main Parameter: Super-lock clamp vise height: 4.7 inch (120 mm). Jaw height: 1.8 inch (45 mm).
  • Stable Operation: Integrated clamp body and fixed jaw. Such design enables more stable clamping.
  • Quality Material: Accurately grinded flat vise will connect precisely with machine tool, thus reaching accuracy requirement of 0.0008" (0.02 mm).
  • High Precision: Precision milling drilling vise, able to accomplish sawing, filing, chiseling and some assembly and removal jobs in milling, drilling machine and precision parts finishing.
Check Stock

3 Inch Cross Slide Drill Press Vise, Aluminum Alloy Milling Vice Holder Woodworking Clamping Vise Machine Bench Top Mount Cross Sliding Vise with Rotating Handle for Wood Working

  • 【Provide Strong Clamping Force】: Widened jaws of the cross slide drill press vise for stronger clamping force to keep workpiece more stable during machining, maximum jaw is 2.73in.
  • 【High Accuracy】: The handwheel has 0.1 mm increments marked by the machine for maximum accuracy. X direction adjustment is 80 mm. Y direction adjustment is 67mm.
  • Ergonomic handle of the milling vice clamping machine for easy slide on and off.
  • 【Heavy Duty Construction】: Drill press vice is constructed of high quality aluminum alloy, ensures high hardness and durability.
  • The gripper is equipped with a removable silicone pad, which can better protect the workpiece during operation.
  • 【Easy to Use】: With high-strength accuracy screw, the bench milling vice holder is not easy to slip or deform, provide great stability and easy to use, high working efficiency.
  • 【Versatile Milling Vice Holder】: 3 inch cross slide drill press vise is designed for woodworking and metalworking, widely used in milling machine, drill press and machinery maintenance, etc., great for home use or light professional use.
Check Stock