ReviewsMilling Machine Worktable Clamp

DIY Mini Electric Belt Sander Multifunctional Grinding Machine, Electric Knife Apex Edge Sharpener, Small DIY Polishing Machine with 10 pcs Sand Belts

  • The Mini Belt Sander machine body is made of all stainless steel, strong and wear-resistant, can be used for high-speed steel drill bit grinding..
  • The worktable angle can be adjusted at 45 degree up and down..
  • The belt can be replaced very easily by pulling the top two wheels..
  • The mini belt sander is with 4 pcs rubber foot pads to adjust height and absorb shock. They can be removed so that you can clamp it to table..
  • With built-in double bearing in the abrasive belt wheels, it is easy to use and smooth to operate..
Check Stock

D26 Milling Machine Ball Handle Three Ball Handles Three Ball Rocking Handle Three Pills Handle Ball Crank 16mm Inner Hole Diameter

  • The milling machine's three-ball crank is made of high-hardness material and is durable enough for most milling machines and work benches..
  • The surface of the three-ball crank of the milling machine has been carefully polished, with high gloss and beautiful appearance, eliminating burrs and safe use..
  • The olive-shaped hand-held part of the three-ball crank of the milling machine is ergonomically designed for comfortable grip and reduced work load..
  • The inner diameter of the three-ball crank of the milling machine is about 16mm in diameter, which is closely connected with other parts of the milling machine and is easy to operate..
  • We strive to provide you with the highest quality product and the best customer experience, if you're not entirely satisfied, please just feel free to contact us at any time..
Check Stock

PENSON & CO. 5/8

  • Clamp a wide range of workpieces securely to the table while machining, milling or drilling.
  • Made of high grade steel and all the blocks, bolts, nuts and hold-downs are case hardened..
  • Racks can be bolted to the wall or side of machine for easy access. Best among mini clamps press tool sets.
  • This machine clamping kit provides a variety of add-ons to fully utilize Central Machinery's two speed variable bench mill/drill machine.
  • Include a variety of flange nuts, tee nuts, step blocks, coupling nuts, studs and hold down bars to fit almost any machine clamping need.Description58Pc Deluxe Steel Clamping Kit 5/8" T-Slot 1/2"-13 Stud-Size for Bridgeport Mill.
  • Compatible with all Bridgeport and Bridgeport type machines.
  • Well-organized set with each tool having it's slot.
Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

  • Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
  • High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
  • Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
  • High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
  • Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.
Check Stock

TE-CO 20413 Machinist Clamp Kit, 1/2\ Table T-Slot x 3/8-16\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 1/2" machine tool table T-slot to fit 1/2" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20402 Machinist Clamp Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20401 Machinist Clamp Kit, 9/16\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 9/16" machine tool table T-slot to fit 9/16" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20402PL Machinist Promo Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

WEIXINHAI Camera Desk Mount Stand, 16.5-28.3 inch Aluminum Adjustable Tabletop Light Stand with 360° Rotatable Ball Head, 1/4“ Screw for DSLR Camera, Ring Light, Webcam, Projector

  • 【Adjustable Tabletop Stand】The desk mounting light stand can be adjusted Height of can be expanded from 16.5 inches to 28.3 inches (42 cm-72 cm).
  • Adjustable C-clamp can support the thickness of the worktable from 0.2 inches to 2.4 inches, The maximum weight that the stand can bear is 6 lb..
  • 【Non-slip Durable Material】Our clamp camera mount is made of sturdy and lightweight aluminum alloy, Preventing deformation, can be arbitrarily folded, Ring Light Mount easy to carry and storage, Ensure long-term use without rust..
  • 【C-clamp Camera Mount Stand】C clamp adopts EVA silicone anti-skid pad improve the stability of the base. Sponges on both sides to protect the table and furniture from scratches..
  • 【Applicable and Universal】With standard 1/4 screw, Rotating Camera Stand 360 ball head degree rotation. Perfect for makeup, Interviews, Smartphone holders and Dslr Desk Mount, live streaming, video chatting, Led video lights, light stands, etc..
  • 【About Desk Camera Mount Sets】1x adjustable desktop stand, 1x 360-degree metal ball head, 1x metal C-clamp, 1x instruction manual. promise friendly after-sales service, 24 hours customer service team.please rest assured to buy!.
Check Stock

Kitchen Appliance Sliders by LEMGU, 12 Pack DIY Self Adhesive Appliance Sliders for Most Coffee Makers, Blenders, Air Fryers, Pressure Cooker, Stand Mixers for Easy Sliding, Square

  • Convenient Kitchen Appliance Sliders: Easy to stick on the bottom of the appliance that can not only increases the height of the appliance and the worktable, allow it without touching water, but also can push, drag and even rotate the machine easily..
  • Provide Application a New Upgrade: Small appliance sliders are made of premium PTFE (Teflon) with a self-adhesive pad, gently push and pull can achieve unexpected results, allow the appliance move at will can give you better using experience..
  • Protect Appliance & Save Space: DIY kitchen appliance sliders can used for most heavy household appliances, make them easily slide on the worktable without leaving marks or making a harsh sound, offer appliance protection and save space of worktable..
  • Wide Applications: The sliders can be easily adhered to glass, wood, metal, plastic for most heavy household appliances, such as coffee makers, blenders, air fryers, pressure cooker, stand mixers and more. Also can be used on furniture such as stools, chairs, sofas and cabinets to facilitate movement without damaging the floor..
  • Simple & Practical Sliders: Durable material and self-adhesive design allow the sliders operate easier and than trays and mats to push the appliance without worry about damage the appliance or wo....
Check Stock

Milling Cutter, 3.175x2x17mm Straight Shank Engraving Good Durability Spiral Milling Cutter Tungsten Steel Milling Cutter Milling Cutter Single for Repair Tool

  • Made of tungsten steel material, with high hardness and strength, wear resistance and corrosion resistance..
  • The milling cutter is a single‑flute spiral milling cutter with fast processing speed and good chip removal effect..
  • The blade adopts mirror grinding technology, the appearance is not rough, and the milling is glossy..
  • The milling cutter is mainly used for plane milling, notch milling, step face milling and profiling milling..
  • The kit contains 5 spiral milling cutters, with standard size, often used in CNC engraving machine..
Check Stock