ReviewsMilling Machining

Half Round Keyway Milling Cutter, Hss Straight Shank T Slot Milling Cutter, 3 x 16 x 10mm Milling Cutter Milling Tool Milling Cutter

  • APPLICABLE MATERIALS: Widely used for milling steel, aluminum, copper and iron materials..
  • HIGH-SPEED STEEL MATERIAL: The high-speed steel material is used, and the metric system has a straight handle, which is easy to use and very practical..
  • HIGH WORK EFFICIENCY: Woodruff key-seat milling cutter, convenient for CNC machining, improve work efficiency..
  • T-SLOT MILLING CUTTER: T-slot milling cutter, stable structure, excellent performance and long service life..
  • SIZE: Woodruff key position cutter blade width is 3mm / 0.1in, outer diameter is about 16mm / 0.6in, and the handle diameter is 10 mm/0.4 inches..
Check Stock

Precision Twist 4ASM High Speed Steel Short Length Drill Bit, Black Oxide Finish, Round Shank, Spiral Flute, 135 Degree Point Angle, 11.00mm (Pack of 6)

  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP, process the heat treatment materials under 32°with high speed, reduce changing times and improve the production efficiency..
  • CUTTING EDGE DESIGN: the bottom of end mill bits is u-shaped groove design, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • APPLICATION: end mill bits are suitable for side milling, end milling, finish machining, etc. Apply to carbon steel, alloy steel, die steel, tool steel, cast iron, titanium, aluminum, etc..
  • One Set of metric end mill bits Including: 8 Different kinds of Size end mills to meet your need, 2mm=1/16.
Check Stock

Mini Vertical Slide (90 x 50 mm) for instant Milling Operation on Lathe Machine

  • TOOL POST MINI VERTICAL SLIDE -EASY & QUICK CLAMPING.
  • Quality Lathe Milling Vertical Slide Bed Size 90 mm Length x 50 mm Width Small Vertical Mi.
  • Small Vertical Milling Slide for Bench Small Lathes Can be fitted to Emco, Myford, Warco, Sieg C3 Small Lathes with little modification/ machining.
Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

  • T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
  • Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
  • Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
  • Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
  • Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
  • Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..
Check Stock

ER32 Collet Holde Carbon Steel MT4 ER32 M16 Collet Chuck Tooling Holder CNC Milling Lathe Tool with Wrench

  • ER straight extension rod, long shaft, suitable for deep hole machining. Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
  • Straight-type handle body for holding small drilling, milling tools..
  • You can reduce the use of longer tools, which can reduce costs and improve efficiency..
  • Stable diameter, other parts have been accurate ground to eliminate imbalance..
  • Mainly used for various types of drilling and milling machine, spindle Morse taper machine..
Check Stock

ISCAR QPMR 100404PDN-HQ-M IC28 Carbide Milling Inserts CNC

  • Used mainly for machining aluminum at medium cutting speeds and medium or large chip sections. The inserts usually feature very sharp cutting angles.
  • Super positive square milling inserts for machining aluminum, stainless steel, and high temperature alloys (QUAD2000).
  • ISO Range - P/M/K / ISO Range - N/S/H (N15-N30).
  • Grade or Coating Type: Uncoated / Coating Layers: Uncoated.
Check Stock

10 pcs 4-Flute End Mill Bits, AFUNTA 0.08\ - 0.47\ HSS CNC Straight Shank Drill Bits Cutter Tool Set for Wood Aluminum Steel Titanium

  • APPLICATION: Suitable for side milling, end milling, finish machining in carbon steel, alloy steel, die steel, tool steel, cast iron, and titanium..
  • HIGH PROCESSING EFFICIENCY: the edge of end mill bits is HARD and SHARP with TIAIN coating, process the heat treatment materials with high speed, reduce changing times and improve the production efficiency..
  • U-SHAPED GROOVE DESIGN, large front angle effectively reduces cutting resistance, sharp and durable, convenient for chip removal, further improve machining efficiency..
  • MATERIAL: high speed steel, high hardness, good wear resistance and durability..
  • 10 DIFFERENT KINDS OF SIZE end mills to meet your need, 2mm/0.08in,3mm/0.12in, 4mm/0.16in, 5mm/0.2in, 6mm/0.24in,7mm/0.27in, 8mm/0.31in, 9mm/0.35in,10mm/0.39in, 12mm/0.47in.
Check Stock

CNC Milling Kits NT30-FMB22 Collet Chuck Holder + 50 Cutter + APMT1604 Milling Inserts Strong Rigidity for CNC Milling Machine(#1)

  • Benefits of this product family : CoroMill 390 covers many applications with a large versatile programme including cutter versions for shoulder milling and long edge milling.
  • The cutters generate a good quality 90-degree shoulder and are ideal for ramping and helical interpolation.
  • ​The light-cutting insert geometries and high-performance grades of CoroMill 390 are designed for low cutting forces and vibration-free machining for secure milling in all materials.
  • ​Experience the benefits of internal coolant available on most CoroMill 390 cutters.
Check Stock

GBJ Face milling Holder 50mm/1.96\ CNC Face Mill End Milling Shell Cutter with APMT1604PDER -DP Shank Face Mill Arbor BAP400R 50-22-4T (BAP400R 50-22-4T+APMT1604PDER Yellow)

  • ☞About the 400R 50-22-4T Milling holder: 40Cr MnTi ,50mm/1.96" height and face diameter. Interface diameter: 22mm/0.86". Through heated and quenched, solid hard with good cushioning effect, Screw down insert..
  • ☞About the APMT1604 inserts: carbide inserts with CVD coating , Machining steel parts and iron ,PMKSH,For shoulder milling, face milling and slotting,HRC15°-55°.
  • ☞ Advantage:High vibration-absorbing performance, improve the surface finish of the workpiece, Great for shoulder milling, face milling and slotting.
  • ☞Material : Made from alloy steel hardened to HRC 52-56 ,90° Cutting angle ,Screw down insert.
  • ☞Package: 1x BAP 400R 50-22-4T Indexable End Mill with wrench + 10pcs APMT1604PDER BP010 carbide inserts.
Check Stock