ReviewsMilling Tool Kit

uxcell HSS Lathe Tool Bit 6mm x 6mm x 200mm, Square Lathe Turning Tool Blanks, High Speed Steel Rectangular Fly Cutter Mill Blank, 5pcs

  • Specifications: Size: 6mm x 6mm x 200mm, hardness HRC60~62. High-speed steel lathe tool bit.
  • General Purpose: HSS tool bit is a superior finishing tool for cuts in hard materials of mild steel, alloy and tool steel.
  • Versatile Tool Bit: Ideal for milling, turning, parting, engraving, drilling, punching, etc. Commonly used on a lathe, a milling machine fly cutter or a metal shaper.
  • Features: Parallel style cutter is with continuous width of cutting edge throughout length of tool bit.
  • High-speed Steel Tool: High-speed steel tool bit is with combination of hardness and toughness for wear resistance.
Check Stock

Utoolmart HSS Lathe Tool Bit 6mm x 50mm x 200mm Square Lathe Turning Tool Blanks High Speed Steel Rectangular Fly Cutter Mill Blank 1pcs

  • 【Specifications】- Size: 6mm x 50mm x 200mm / 0.24" x 1.97" x 7.87" , hardness HRC 60-62. High-speed steel lathe tool bit.
  • 【General Purpose】- HSS tool bit is a superior finishing tool for cuts in hard materials of mild steel, alloy and tool steel.
  • 【Versatile Tool Bit】- Ideal for milling, turning, parting, engraving, drilling, punching, etc. Commonly used on a lathe, a milling machine fly cutter or a metal shaper.
  • 【Features】- Parallel style cutter is with continuous width of cutting edge throughout length of tool bit.
  • 【High-speed Steel Tool】- High-speed steel tool bit is with combination of hardness and toughness for wear resistance.
Check Stock

uxcell 1/8" Shank 0.8mm x 3mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

uxcell 5PCS 1/8" Shank 1.5mm x 12mm Carbide End Mill CNC Router Bits 2 Flute Milling Bit for Acrylic PVC MDF Wood

  • 1/8 Inch CNC Bits: Shank Diameter: 3.175mm / 1/8".
  • Wide Applications: CNC router bits are suitable for Acrylic, PVC, Wood, Nylon, Resin, ABS, MDF, Plywood, Hardwood. Good for 2D sculpturing, cutting, engraving, slotting, milling, etc. Works with milling and engraving machines..
  • Spiral & Sharp Router Bits: Large chip space design for fast and clean chip removal. Spiral sharp cutting edges provide smooth cuts and no burrs for increased efficiency, not easy to stick, precision ground..
  • Carbide End Mills: Tungsten carbide has good wear resistance, high strength and resistance to cutting temperatures. Carbide can run at higher speed than high-speed steel. Chamfered shank for ease of use.
  • Tips: Upcut milling bits can direct chips up and away from the milling area, leaving an unobstructed path to prevent tool breakage and extends the tool life. Properly reduce the cutting speed and feed rate to prolong the service life..
Check Stock

Carbide Chamfer Cutter, End Mills Tungsten Steel 3 Flute Chamfer End Mill 90° for Carving for Chamfering(D4*90°*50L)

  • The chamfering tool has standard size and can be used as an aluminumcopper milling cutter tool and an engraving milling cutter head..
  • The professional chamfer design can polish and engrave the workpiece without unloading..
  • The unique one-piece design makes the debris generated during the cutting process easier to fall without clogging the tool..
  • The chamfering tool is mainly used for 90° chamfering or taper hole processing on the workpiece..
  • The chamfering is designed with 3 flutes, which can complete the operation of conical surface at one time, and is suitable for small cutting amount..
Check Stock

It Works Great HSS Lathe Tool Bit 8mm x 8mm x 200mm, Square Lathe Turning Tool Blanks, High Speed Steel Rectangular Fly Cutter Mill Blank (5/16 inch x 5/16 inch x 8 inch ) 2pcs

  • Specifications: Size: 8mm x 8mm x 200mm, hardness HRC60~62. High-speed steel lathe tool bit.
  • High-speed Steel Tool: High-speed steel tool bit is with combination of hardness and toughness for wear resistance.
  • Features: Parallel style cutter is with continuous width of cutting edge throughout length of tool bit.
  • General Purpose: HSS tool bit is a superior finishing tool for cuts in hard materials of mild steel, alloy and tool steel.
  • Versatile Tool Bit: Ideal for milling, turning, parting, engraving, drilling, punching, etc. Commonly used on a lathe, a milling machine fly cutter or a metal shaper.
Check Stock

HSS 12mm x 45 Degree Dovetail Cutter Milling End Mill High Speed Steel

  • Durable and Sturdy: This Dovetail Milling Cutter is made of high speed steel, so it is wear-resistant, durable, tough, and you can use it for a long time..
  • Uniform Angle Distribution: This Dovetail Milling Cutter featuring uniform angle distribution and double-edged design has more excellent cutting performance..
  • Wide Application:This milling cutter with fine workmanship and high quality is suitable for mold steel, alloy steel, carbon steel, tool steel, cast iron and more..
  • Meet Your Needs: Available in 45 and 60 degree, 8 and 10 flute, and 12mm,14mm,16mm,18mm, 20mm, and 25mm diameter, this Dovetail Milling Cutter can meet your needs..
  • Satisfaction Guarantee: We strive to bring the product to our customers. If you are not satisfied, please let us know, and we'll do our to make it right.
Check Stock

2 Axis Metal Case LCD DRO Digital Readout Display for Mill Milling/Lathe Machine (2 Axis DRO)

  • ...Meanwell Power supply ,Omran Key button.Switch on& Switch off can meet more than 100000 times.
  • [HIGH Performance】-Acceptable resolution: 10um ,5um ,2um ,1um , 0.5um.
  • Min resolution of digital display angle :0.0001/pulse, Linear Scale/Magnetic scale Interface: DB9(TTL/EIA-422-A).
  • 【Wide Application】Applicable for milling machine, drilling machine, grinding machine, lathes, profile projector, video measuring machine, position monitoring, coordinate measurement,.
  • 【Special Function】1:Tool radius compensation: In the use of cylindrical milling tool carrier, the tool radius must be taken into account. The direction of process will decide the increase or decrease of calculated value .Once the tool number is inputted, the DRO value will be saved. 2 :Determine the workpiece centre: Only through the tool or touching the two points of workpiece, the DRO can calculate the workpiece centre.
  • 3 :200 sets tool base: While repeat the same process in the workpiece, you can store the tool value which will be convenience to the operator Round arc processing: Sample round processing and two axis arc processing.
  • 4:Slope calculation: Input the two points of workpiece, the DRO can calculate the slope of the workpiece..
Check Stock

TE-CO 20413 Machinist Clamp Kit, 1/2\ Table T-Slot x 3/8-16\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 1/2" machine tool table T-slot to fit 1/2" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20402 Machinist Clamp Kit, 5/8\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 5/8" machine tool table T-slot to fit 5/8" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock

TE-CO 20401 Machinist Clamp Kit, 9/16\ Table T-Slot x 1/2-13\ Stud, 52 Pieces

  • Don't waste your time looking for a clamp, block, stud or nut ever again, this kit has it all packed into one easy to access holder.
  • For workholding during machining applications.
  • 9/16" machine tool table T-slot to fit 9/16" T-slot nuts.
  • Bridgeport type milling machines use Part No. 20402.
  • Made from case hardened 1018 steel with a black-oxide finish.
Check Stock