ReviewsMilwaukee 12v Impact Driver

energup 2Pack 12V 6.0Ah Battery for Milwaukee 12-Volt Battery M12 for Milwaukee 48-11-2440 48-11-2411 48-11-2410 with a 48-59-2401 12Volt Milwaukee M12 Battery Charger

  • Package include: 2Pack Replacement 6.0Ah Milwaukee 12Volt Batteries, 1Pack 48-59-2401 Replacement milwaukee battery charger..
  • Compatible with Milwaukee 12V XC 48-11-2440 48-11-2420 48-11-2401 48-11-2402 48-11-2411 Cordless Power Tools. Replacement battery for Milwaukee M-12 battery..
  • 6.0Ah High Capacity offers Long-Lasting Performance and Durability. Charger with diagnostics LED indicator shows battery charging status..
  • CE, FCC, and ROHS certified and tested by manufacturer to match OEM products. No memory effect. Can be charged or discharged as needed without loss of capacity. Integrated microchip prevents overcharging & lengthens battery life..
  • 45 days money back, 12 months warranty. Any questions about the milwaukee 12v batteries or milwaukee charger, we support 24*7 hours prompt customer service..
Check Stock

DEWALT 12V MAX* Cordless Drill / Driver Kit 3/8-Inch DCD710S2

  • DCD701 12V MAX* Brushless 3/8 inch drill/driver has 32% more power**.
  • DCD701 12V MAX* Brushless 3/80-inch drill/ cordless impact driver is 20% shorter**.
  • Brushless motor for maximum runtime and durability.
  • The drill/driver has a 3/8 inch ratcheting chuck for a wide variety of bits.
  • The drill/driver has a high speed transmission with 2-speed settings and 15 clutch settings.
Check Stock

Milwaukee Bundle Cordless M18 18 Volt 1/2' Impact 2767-20 Wrench with 48-11-1850 Redlithium XC 5.0AH Battery

  • All-metal gear case and 1/2 in. metal chuck: provide maximum impact and shock durability.
  • Milwaukee brushless motor: optimized for efficiency, this motor delivers more run-time and longer life.
  • Compact design: provides excellent balance and control, ideal for overhead applications or work in tight spaces.
  • Chuck type: 1/2 in. metal ratcheting single sleeve.
  • Includes: 2902-20 hammer drill driver, 2850-20 impact driver, 1 M18 compact REDLITHIUM 2.0 Ah battery (48-11-1815), 1 M18 REDLITHIUM 4.0 Ah XC extended capacity battery (48-11-1840), 1 M18 and M12 multi-voltage charger (48-59-1812), 1 belt clip, 1 contractor bag, M18 HACKZALL reciprocating saw (2625-20).
Check Stock

Milwaukee 2808-20 M18 FUEL HOLE HAWG Brushless Lithium-Ion Cordless Right Angle Drill with 7/16 in. QUIK-LOK (Tool Only)

  • All-metal gear case and 1/2 in. metal chuck: provide maximum impact and shock durability.
  • Milwaukee brushless motor: optimized for efficiency, this motor delivers more run-time and longer life.
  • Compact design: provides excellent balance and control, ideal for overhead applications or work in tight spaces.
  • Chuck type: 1/2 in. metal ratcheting single sleeve.
  • Includes: 2902-20 hammer drill driver, 2850-20 impact driver, 1 M18 compact REDLITHIUM 2.0 Ah battery (48-11-1815), 1 M18 REDLITHIUM 4.0 Ah XC extended capacity battery (48-11-1840), 1 M18 and M12 multi-voltage charger (48-59-1812), 1 belt clip, 1 contractor bag, M18 HACKZALL reciprocating saw (2625-20).
Check Stock

Milwaukee Shockwave Impact Driver Bit Set (100 Piece) 48-32-4083

  • Milwaukee 22-Piece Shockwave Impact Driver Bit Set 48-32-4016.
Check Stock

Metabo HPT 18V MultiVolt Hammer Drill and Triple Hammer Impact Driver Cordless Combo Kit | Lifetime Tool Warranty | KC18DBFL2C

  • DCD701 12V MAX* Brushless 3/8 inch drill/driver has 32% more power**.
  • DCD701 12V MAX* Brushless 3/80-inch drill/ cordless impact driver is 20% shorter**.
  • Brushless motor for maximum runtime and durability.
  • The drill/driver has a 3/8 inch ratcheting chuck for a wide variety of bits.
  • The drill/driver has a high speed transmission with 2-speed settings and 15 clutch settings.
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Makita, Ridgid, Bosch, Ryobi, More (2 Pack, Standard)

  • Don’t get stuck up a ladder without the bit you need! Five storage locations allow you to keep your most used ¼" hex bits on your drill or driver so you always have what you need when you need it. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Ridgid and Makita drills and drivers. See pictures for specific fitments..
  • Don’t let your bit holder get in your way or stop you from using your belt hook! The Hardwerks bit holder mounts on either the left or right side of your impact driver or drill. Bit holders that only mount on the right side of your tool get in the way when you are grabbing your driver and make bit changes harder. The Hardwerks bit holder works with Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Tired of dropping screws, holding them in your mouth or fishing for them in your pocket? Stick your screws securely to the magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Your bit holder won’t rotate, loosen or fall off! Hardwerks bit holder is screwed securely to your drill or driver. Bit holders attached with adhe....
Check Stock

PULITUO 12V Cordless Impact Driver with 1/4\Chuck, Max Torque 88 ft-lbs (120N.m), 2.0A Li-ion Battery, 8 Pcs Screwdriver bits, 1 Hour Fast Charger and Tool Bag

  • [Compact and Powerful]: With powerful motor, this 12V impact driver delivers 88ft pounds of max torque and max 2200rpm speed, allows you to tighten or loosen various nuts and bolts easily..
  • [Infinitely variable speeds]: Infinitely variable speeds control is possible with the On/Off switch. The further you push the switch, the higher the speed of the impact wrench. Once release the switch, the tool stop immediately, provides more security..
  • [Fast Charger&Power Indicator]: Rechargeable 2.0 Ah lithium-ion battery pack allow the electric driver work longer. Power Indicator remind charger in time. Fully charged in only 1 hours with the matched fast charger..
  • [Wide Application]: Cordless Impact driver with 1/4'' chuck can be used for automotive repairs, major construction projects, heavy equipment maintenance, or product assembly. The LED lamps illuminate the work area, allow to use in darkness..
  • [Cordless Impact driver Set]:This impact driver kit includes 1xImpact driver, 1x2.0AH Battery Pack, 1xFast Charger, 8xScrewdriver bits,1xTool Bag..
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Ridgid, Makita, Bosch, Ryobi, More (2 Pack, Premium)

  • Phillips, torx, square drive? Stop running around searching for the right bit. Keep them right on your impact driver or drill with five storage locations which you to keep your most used ¼" hex bits with you at all times. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Makita and some Ridgid drills and drivers. See pictures for specific fitments..
  • Mounts on either side of your tool and works with or without the belt clip. Many bit holders only mount on the right side of your tool so they get in the way when you are grabbing your driver and make bit changes harder if you are right handed. The Hardwerks bit holder works with or without Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Wondering where to put loose screws while you are working or how to carry that long drill bit? Stick your screws securely to the exposed magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Upgrade to the premium bit holder for the strongest neodymium magnet available so that even the heaviest bits won’t fall out when your driver is hanging upside down ....
Check Stock

SDS Plus Ground Rod Driver for 5/8 Inch and 3/4 Inch Ground Rods, Fit All SDS-Plus Rotary Hammer Drills 13/16'X 6-11/16'(20x170mm)

  • The Industrial grade SDS-Plus ground rod driver is designed to drive 5/8" and 3/4" ground rods or rebar. Save a lot of manual hammering work..
  • SIZE : 6.7" (170mm) Length and 3/4" (20mm) ID and 1" (25mm) OD.
  • MATERIAL : SDS Plus Ground Rod Driver made of high quality hardened steel，Metal thick wall for impact, rust and corrosion resistance. One-piece design, reusable..
  • COMPATIBLE:The ground rod driver is compatible with Bosch, Dewalt, Hilti, Makita, Milwaukee and all other SDS - Plus Ground Rod..
  • SALES SERVICE:we promise unconditional replacement or refund if you have any issue with the ground rod driver. Just click 'contact seller' ,we will exert ourselves to satisfy to you!.
Check Stock

Milwaukee M18 2850-20 18-Volt 1/4-Inch Brushless Impact Driver - Bare Tool (Renewed)

  • Compact design: provides excellent balance and control, ideal for overhead applications or work in tight spaces.
  • Milwaukee brushless motor: optimized for efficiency, this motor delivers more run-time and longer life.
  • Includes: 2850-20 M18 1/4 in. Hex impact driver bare tool.
  • Bare Tool Battery and charger not included.
Check Stock