ReviewsMilwaukee Power Drill

Milwaukee 48-11-1828 M18 XC RED LITHIUM 18-Volt Lithium-ion Cordless Tool Battery (2 pack)

  • REDLINK Intelligence: Provides optimized performance and overload protection using total system communication between tool, battery and charger.
  • Offers long-lasting performance and durability.
  • Fuel gauge onboard: Displays remaining runtime for less downtime on the job.
  • All-weather performance: Delivers fade-free power in extreme jobsite conditions.
  • Versatility: Powers more than 40 Milwaukee M18 cordless power tools.
  • Designed to optimize individual cell usage.
  • Milwaukee 18 volt battery pack provides the power you need to work with more than 40 heavy duty Milwaukee power tools.
Check Stock

Sabre Tools 5/8\ SDS Plus Ground Rod Driver Bit for use with Rotary Hammer (5/8\ Ground Rod Driver)

  • 3/8" x 10” x 12" SDS Plus Drill Bit (Version 2) – long masonry hammer drill bit.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

Milwaukee 2415-20 M12 12-Volt Lithium-Ion Cordless Right Angle Drill, 3/4 In, Bare Tool, Medium

  • Features 3/8-inch single-sleeve ratcheting chuck for maximum versatility and grip.
  • An extended paddle switch allows for controlled use in multiple positions.
  • Electronic clutch with 11 settings plus drill mode for complete control.
  • Built-in LEDs illuminate the work surface and indicates when clutch is out.
  • The on-board fuel gauge displays remaining run-time on the M12 lithium-ion battery pack.
Check Stock

HQRP High Power Upgrade Bulb 3W LED 180LM Compatible with 12 14.4 18 Volt Hitachi Ryobi Skil Makita Craftsman Bosch Porter Cable Dewalt Milwaukee Ridgid Flashlight

  • 200 days warranty! Compatible with Milwaukee 49-24-0155 49-24-0165 Flashlight.
  • DeWALT DC509 36V Cordless Li-Ion Floodlight, DC519 28V Heavy Duty Flashlight.
  • Craftsman 973638-001 fits 315271400 3/8" Cordless Drill Driver, 27153 Flashlight, 315217530 Work Light.
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Makita, Ridgid, Bosch, Ryobi, More (2 Pack, Standard)

  • Don’t get stuck up a ladder without the bit you need! Five storage locations allow you to keep your most used ¼" hex bits on your drill or driver so you always have what you need when you need it. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Ridgid and Makita drills and drivers. See pictures for specific fitments..
  • Don’t let your bit holder get in your way or stop you from using your belt hook! The Hardwerks bit holder mounts on either the left or right side of your impact driver or drill. Bit holders that only mount on the right side of your tool get in the way when you are grabbing your driver and make bit changes harder. The Hardwerks bit holder works with Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Tired of dropping screws, holding them in your mouth or fishing for them in your pocket? Stick your screws securely to the magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Your bit holder won’t rotate, loosen or fall off! Hardwerks bit holder is screwed securely to your drill or driver. Bit holders attached with adhe....
Check Stock

Hardwerks Universal Fit Magnetic Bit Holder, Securely Mounts to Belt Clip Screw, Fits Both Left and Right Side of Driver, for Milwaukee, DeWalt, Ridgid, Makita, Bosch, Ryobi, More (2 Pack, Premium)

  • Phillips, torx, square drive? Stop running around searching for the right bit. Keep them right on your impact driver or drill with five storage locations which you to keep your most used ¼" hex bits with you at all times. Includes 2 bit holders and mounting screws for all brands. Fits Milwaukee M18, Dewalt, Bosch, Ryobi, Makita and some Ridgid drills and drivers. See pictures for specific fitments..
  • Mounts on either side of your tool and works with or without the belt clip. Many bit holders only mount on the right side of your tool so they get in the way when you are grabbing your driver and make bit changes harder if you are right handed. The Hardwerks bit holder works with or without Milwaukee and Dewalt belt clips as well as available universal belt clips for other brands..
  • Wondering where to put loose screws while you are working or how to carry that long drill bit? Stick your screws securely to the exposed magnet on the side of the holder and easily retrieve them when needed. Need to pre-drill or counter sink a hole? Stick the drill bit to the side magnet and take it with you..
  • Upgrade to the premium bit holder for the strongest neodymium magnet available so that even the heaviest bits won’t fall out when your driver is hanging upside down ....
Check Stock

Sabre Tools 3/4 Inch x 39 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (3/4\ x 37\ x 39\)

  • 3/4" x 37” x 39" SDS Plus Drill Bit – long masonry hammer drill bit.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

Sabre Tools 5/8 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (5/8\ x 16\ x 18\)

  • 5/8" x 16” x 18" SDS Plus Drill Bit – long masonry hammer drill bit.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

Sabre Tools 5/8 Inch x 39 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (5/8' x 37' x 39')

  • 5/8″ x 37” x 39″ SDS Plus Drill Bit – long masonry hammer drill bit.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

Sabre Tools 1-1/8 Inch x 18 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete (1-1/8' x 16' x 18')

  • 1-1/8″ x 16” x 18″ SDS Plus Drill Bit – long masonry hammer drill bit, SDS Plus Only.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock

Sabre Tools 1/2 Inch x 12 Inch SDS Plus Rotary Hammer Drill Bit, Carbide Tipped for Brick, Stone, and Concrete Version 2 (1/2\ x 10\ x 12\)

  • 1/2" x 10” x 12" SDS Plus Drill Bit (Version 2) – long masonry hammer drill bit.
  • High quality SDS bit designed to work in masonry applications.
  • Compatible with all SDS Plus sized rotary hammer drills.
  • Bosch, DeWalt, Hitachi, Hilti, Makita, Milwaukee, etc..
  • SDS hammer drill bit feature 2-flute self-centering carbide tip ensuring fast cut speeds and MAXIMUM life.
  • Extended life – our concrete bits optimized design allows material to quickly exit the hole while allowing the concrete hammer drill bit to remain cool.
Check Stock