ReviewsMini Air Cylinder

Spare Air Original Mini Scuba Tank - 6 cu ft -Made in USA -DOT Marked Tank with Holster, Leash, Refill Adapter

  • ...all running out of air and barely escaping to the surface in time. With this simple backup tank you can ensure you'll always have enough air to return..
  • SIMPLE TO USE: The Spare Air system is designed to be simple so you can access your backup air any time. This refillable cylinder can be handed off to a fellow diver in trouble and begin providing nitrox oxygen in a moment's notice..
  • LOW PROFILE TANK: With it's small size and simple holster system this tank is out of the way when diving but easily accessible when you need it. It's 13.4" tall and has a 3.25" diameter. Weighing just 3.7lbs when full you can ignore this mini tank until you need it..
  • EVERYTHING YOU NEED: This black anodized aluminum scuba tank comes with a black holster that attaches easily to your dive gear, a leash to prevent accidental loss, and a refill adapter to fill air off of scuba tanks. This package has all the equipment you need to dive with added safety..
  • ALWAYS RETURN WITH AIR TO SPARE: After barely avoiding a catastrophe when he ran out of air on a dive Larry Williamson patented the Spare Air mi....
Check Stock

1\ Bore X 24\ Stroke Double Acting Pneumatic Cylinder (Roughly 1\ Bore 20MM)

  • These pneumatic cylinders are what everyone uses to make Halloween Props. They are extremely versatile, and have tons of mounting options that will allow you to set up your prop in may different ways.
  • You can also use these with a 2-way or 3-way solenoid if you are using gravity/weight to push the cylinder back down. When the solenoid is triggered, air is applied through the bottom hole - forcing rod up very quickly..
  • Examples: Lid Opener Pop-up props Moving Skeletons or Zombies Door Banger Coffin Lid Banger Barrel Lid Banger Monster in a Box Trash Can Trauma Bore.
  • These double-acting cylinders extend quickly when air is applied, and snap closed quickly when Solenoid is triggered (when used with a 4-way solenoid)..
  • This is the measure of the diameter of the cylinder. Bigger bore size = more air required to open cylinder = more torque (power) to move things. With this roughly 1" BORE, you will get about 100 lbs. of force at 100 PSI of air pressure. Stroke: This is the measure of how far out the shaft of the cylinder will extend when fully extended. Air Holes: Cylinder comes with two push-in fittings that accept 1/4" airline..
Check Stock

49cc 2-Stroke Engine Single Cylinder Pull Start Mini Choppers/Bikes Exhaust Air-cooled Motor Aluminum Replace Accessories

  • ▶New 49cc 2-Stroke Engine Single Cylinder Pull Start Mini Choppers/Bikes Exhaust.
  • ▶100% brand new and high quality,Durable..
  • ▶ Cylinder Numbers: Single cylinder, Stroke: 2-stroke,Displacement: 49cc, fit T8F chain..
  • ▶Fits the majority of gas scooters, pocket bikes, and mini choppers configured. High quality replacement engine..
  • ▶Please check the size measurement chart carefully before making payment..
Check Stock

XtremepowerUS Pro Aluminium Air Compressor Pump 3 HP 11.5CFM 145PSI Pulley

  • Air compressor pump is widely used for chemical industry, light industry, textile, food processing, health, electronics, machinery, mining, construction, scientific research and other requirements of high-quality compressed air sector.
  • The air compressor head motor with proven belt driven design is greatly for excellent compression and smooth running.
  • Twin cylinder air compressor pump has a cast iron crankcase and aluminum head and valve plate to dissipate heat.
  • Observing the oil viewing window, it can monitor the oil capacity inside the machine in real time, and control the amount of oil when you adding the air compressor oil.
Check Stock

Mini V8 Engine Model Kit That Works Run, STEM Hobby Toy Building Kit for Kids & Adults with DIY Guide & Realistic Parts, for AX90104, SCX10, Capra, VS4-10 Pro/Ultra Model Car

  • Mini Engine Model Toys: Kids DIY Toy V8 Combustion Engine Models Kit That Works! This mini replica of a classic four-cycle 8-cylinder internal combustion gasoline car engine teaches young minds all about the wonderful world of mechanical engineering in one immersive set that makes the perfect hobbies gift set for adults or kids..
  • Simulation Metal Engine: V8 internal combustion engine structural principle design, drive structure of belt wheel winding, generator, air conditioning compressor, steering pump, water pump, complete output flywheel and layered cylinder head, cylinder head cover, spiral near and far valve intake manifold, oil pan structure, and power supply drive board plug interface..
  • Model That Works: Deliver the action of a classic car engine thanks to the powerful pistons and interactive cables! Simply plug the cables into the battery pack distributor and watch the engine fans turn around with real engine sounds..
  • Application: The simulated V8 engine is suitable for a variety of RC models such as AX90104, SCX10, Capra, and VS4-10 Pro/Ultra. Installing this engine will make your remote control car unique and powe....
Check Stock

Simlug Mini Air Pneumatic Cylinder, Cdj2B10-30B 10Mm Diameter 30Mm Stroke DoubleActing Stainless Steel Pneumatic Air Cylinder

  • The pneumatic actuator, The pneumatic cylinder is a mechanical devices which use the power of compressed gas to produce a force in a reciprocating linear motion..
  • The pneumatic air cylinder, Made of high quality stainless steel, the pneumatic cylinder has long service life..
  • This is a double-acting cylinder which uses the force of air to move in both extend and retract strokes..
  • It has 10mm cylinder diameter and 30mm stroke, the pressure is 0.15Mpa~1Mpa..
  • Pneumatic cylinder is quieter, cleaner, and do not require large amounts of space for fluid storage..
Check Stock

Prokomon Cylinder Leak Down Tester,Compression Test kit -Engine Cylinder Dual Leakage Tester Kit Diagnostics Tool

  • ◇ FITS YOUR VEHICLE -- It is compatible with gasoline 4-stroke engines and 10mm,12mm,14mm or 18mm spark. As long your vehicle has a standard spark....
  • ◇ COMPARE CYLINDERS -- It best tests cylinder leak down and compression when comparing a suspect cylinder to a known good cylinder on the same....
  • ◇ EASY TO USE -- Remove the valve and turn the regulator off before applying shop air. Install the hose to the cylinder, the unit to an air supply,....
  • ◇ Designed to detect a variety of common engine faults. including: Worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets.
  • ◇ Tester checks the amount of leakage in an engine cylinder & helps determine the source. Ideal for testing trucks & late model cars where clearance....
Check Stock

New Leak Down Tester Tu-21 Engine Cylinder Leak Tester Leakage Detector Engine Compression Tester Gauges Set

  • FITS YOUR VEHICLE -- It is compatible with gasoline 4-stroke engines and 12mm or 14mm spark. As long your vehicle has a standard spark plug socket,....
  • COMPARE CYLINDERS -- It best tests cylinder leak down and compression when comparing a suspect cylinder to a known good cylinder on the same engine..
  • EASY TO USE -- Remove the Schrader valve and turn the regulator off before applying shop air. Install the hose to the cylinder, the unit to an air....
  • Designed to detect a variety of common engine faults. including: Worn piston rings, worn valves, cracks in cylinder walls and blown head gaskets..
  • Suitable for use on any petrol engine with 10, 12 or 14mm spark plugs. Tester checks the amount of leakage in an engine cylinder & helps determine the....
Check Stock

Air Venturi Mini Wingman PCP Tank, PCP Accessory, 100-Cubic-Inch Air Capacity

  • POWERFUL PCP AIR TANK: The 100-cubic-inch Mini Wingman PCP Tank packs a lot of punch for its compact size. This tank is 16" tall and 4.3" in diameter, and it has a maximum fill pressure of 4,500 psi..
  • COMPACT PCP AIR TANK: Weighing 4 lbs., this compressed-air tank fits into your bag or backpack for easy transport. This tank can be used with many different PCP air guns for a convenient filling station..
  • FAST & EASY FILLING: This PCP tank has an unregulated valve, making it quick and simple to fill any PCP in your collection. The rubberized hand wheel provides precise air-tank control, and the slow-flow valve keeps your cylinder cool..
  • EASY TO USE: With the included test plug and DIN 300 output valve, this tank is easy to use at any time. The stainless-steel female quick-disconnect coupling is attached to the output end of the hose for easy filling..
  • AIR VENTURI: Since 2010, we've been an innovator in the air gun industry. Our quality equipment lasts you through years of use. Rely on our air gun accessories to give you a safe and fun shooting experience..
Check Stock

1- Black Cigar Ashtray Ash2Cigar-1

  • What you will get: you will receive 2 black car cylinder with lid, sufficient quantity to meet your daily needs.
  • Good quality: auto cylinder for car is constructed out of quality material to provide you with a sturdy and durable tray, fits most car cup holder.
  • Cool blue light design: cool blue light will be lighten when open, when you lift the lid, the car cylinder cool blue LED light up.
  • Convenient to install: you only need to fix the car cylinder with 2 fixing clips, it can remain stable when driving, car cylinder help remove odors....
  • Versatile application: the portable cylinder is ideal for office, home and car use.
  • It is also can be a mini trash can and easy to carry with compact....
Check Stock

BBR Tuning Racing Series DIO Cylinder Body & High Performance 21mm OKO Carburetor Assembly

  • RACE READY PERFORMANCE: With the BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly with OKO 21mm Carburetor w/ Velocity Stack you’ll get the power and speed your build’s been looking for. A ported cylinder body with a high performance reed valve intake system, this race assembly was made for race engines in mind..
  • PORTED CYLINDER: Unlike other cylinders, the BBR Tuning Racing Series DIO Cylinder Body is ported to allow maximum fuel and air mixing within your motor. The exhaust port can fit nearly any performance muffler as well as any stock exhaust muffler you want to run, which the intake port is specifically designed to accept the reed valve assembly included with this kit.
  • BOOSTS POWER: With a 32mm opening, you’ll be able to fit hardcore racing carburetors like the BBR Tuning High Performance 2-Stroke OKO Style Carburetor without a single problem. With the right carburetor, this reed will deliver tons of fuel and air to your motor and give you higher speeds and even more torque..
  • COMPLETE KIT: The BBR Tuning Racing Series DIO Cylinder Body & Reed Assembly is paired with a 21mm OKO Race carburetor is racer’s dream setup- get ready for a bike that’ll scream whenever you hit the gas!.
  • INCLUDES: Modified BBR Tuning Racing Series DIO Cyl....
Check Stock