ReviewsMini Atc Fuses

Baomain ATC-2 Grey ATO/ATC 2 Amp Fast-Acting Automotive Blade Fuses - 25 Pack

Combines an ignition protected fuse block and an integrated connecting plug.
Three 30A-200A MIDI/AMI fuses ideal for high-amp circuits including panel feeds, windlasses and stereo amplifiers.
Four 1A-200A ATO/ATC fuses- ideal for circuits including bilge pumps, alarms and clock memory.
Safe for use on gasoline powered boats, reduces wiring connections and consolidates up to seven fused circuits.

【12v Inline fuse holder for standard blade fuses 】-Fuses holder kit including 12PCS 14 AWG inline fuse holders with 60PCS standard car fuses (2A,3A,5A, 7.5A)X5PCS+(10A,15A,20A,30A)X10PCS . The auto fuse size:19mm x 5mm x 18.5mm.14 Gauge Waterproof Pigtail In-line Fuse Holder can support fuses rating of 1A 2A 3A 4A 5A 7.5A 10A 15A 20A ATC/ATO blade fuse..
【Good Conductivity&High-Temperature Resistance】-The Standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, refractory resistance and excellent electrical conductivity.Heavy duty 14AWG red power wire suitable for cars, trucks, Jeeps, boats，marine ATVs, UTVs, SUVs, etc. Adding circuit protection for car alarms,car recorder, GPS, dashboard camera, VCD player, etc..
【waterproof rubber cap design】-This 14 Gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap,theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside ,your car and electrical device from short circuit..
【Inline Blade Fuse Holder Easy Installation】This 12V-DC ATC/ATO TC/ATO in line fuse holder has long enough wire loop Length.
automotive fuse holder loop length: 11.8 inches / 30cm.Firstly,cutting the inline....

SUPPORTS RELAYS & FUSES- Safely stores up to 7x Relays (compatible with 0.25" Pins), and (9x) middle size blade fuse (ATC, ATO).including 2 Pieces....
ACCESSORIES INCLUDED- Metallic pins are included so you can effortlessly swap out relays and fuses from the back of the fuse relay box..
INSTALLATION IS A SNAP- The Snap-Fit upper and lower cover cases allow easy access for relays, fuses, and wires..
VERSATILE MOUNTING OPTIONS- Since most modern vehicles have angular/sloping engine bays or trunk areas, we engineered the mounting legs to snugly....
OEM-STYLE PROTECTION- Tidy up your vehicle's engine bay by securely stowing away your relays and fuses in this sturdy relay box for a clean factory....

Blue Sea Systems Fuse Block ST Blade 12 Circuit with Ground and Cover, part number 5026, can be used for 24-hour circuits.
Max Amps: 100A per block, 30A per circuit, Max Volts: 32V DC, Mounting :#8 (M4) Screw, Negative bus: #10-32 stud, Positive bus: #10-32 stud, Recommended Stud torque: 24 in-lb, Screw Terminal Torque: 18in-lb, Screw terminal type: #8-32 screws with captive star lock washer.
Positive distribution bus with #10-32 stud.
Clear insulating cover with label recesses and storage for two fuses, satisfies ABYC/USCG insulation requirements and has a push button latch that is easy to open.
Accepts ring or spade type terminals and ATO/ATC fast acting blade fuses - fuses sold separately. Includes 20 write on circuit labels.

FT-1 Combination Fuse Tester and Puller for easy removal of blown fuse.
Adjustable probe pitch allowing test on fuses of different sizes: MAXI, ATO/ATC, ATM.
LED indicator light to identify blown fuse in fuse box.
Mini size and compact, the multi-functional automotive fuse tester won't occupy too much space, carry it around easily with the convenience. Material: Plastic.
Size: 70 × 30 × 25mm / 2.8 × 1.2 × 1in.
This automotive fuse checker is made of premium plastic material, sturdy, not easy to aging and abrasion resistant, to ensure maximum strength and durability for long lasting usage.

SUPERIOR PROTECTION — 14 gauge copper wire and blade fuse.
VERSATILE — Designed for 12-24vDC ATO/ATC blade style fuses for use in cars, trucks, boats and more..
WEATHERPROOF — Tight fitting water-resistant cap protects fuse from dust and moisture.
EASY TO USE — Simply connect the inline fuse holder between your power source and load.
Package includes 2 x 14 gauge fuse holders, 2 x 15 amp blade fuses.

SAFETY PROTECTION: Heavy duty 16 AWG fuse holder, great look and added protection to the circuit. And easy to add additional circuits for all cars, CD players, fax machines, etc.
SUITABLE FOR MUITILPLE FUSES: Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A ATC/ATO blade fuse.
WATERPROOF FUSE HOLDER: Unique design of dual slot tight-fitting waterproof lid to enhance moisture-proof and waterproof performance. It's no doubt that this is inline fuse holder extremely safe and reliable.
SUPERIOR QUALITY: High-quality materials ensure high fatigue resistance, melting resistance and excellent electrical conductivity which allows easy installation of additional circuits without cutting or spicing.
PACKAGE INCLUDE: 10 x 16AWG 5.9in ATC/ATO Blade Fuse Holder with 10 pcs 15AMP Standard fuses.

SUITABLE FUSES: Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse of 19.1 × 18.5 × 5.1 mm.
WATER RESISTANCE: Tight-fitting waterproof lid, great damp-proof and waterproof performance, this item is safe and reliable.
SAFETY PROTECTION: Heavy duty 14 gauge (AWG) red color wire, great look and added protection to the circuit.
PREMIUM QUALITY: High-quality materials ensure good bending performance, melting resistance and excellent electrical conductivity.
PACKAGE INCLUDE: 10 x 14AWG ATC/ATO Inline Fuse Holder.