ReviewsMini Ball Bearing Slide

CNBTR U-Type Pulley Wheel with Steel Bearings 8mm Shaft Hole 45mm Diameter for Max-Load 167kg Pack of 4

  • Overall size: outside diameter 45mm/1.77in.
  • R=3mm/0.12in. Please check carefully the size before purchasing..
  • Bearing Model 608ZZ Mini Deep groove ball bearings, fashionable, slide flexible, compression wear.Smooth motion, high printing precision, low noise, can greatly improve the printing speed..
  • Ideal for replacement roller of sliding window, door, printer machine etc..
Check Stock

AOLISHENG 1 Pair Full Extension Drawer Slides Rails 8 10 12 14 16 18 20 22 24 Inch 100 LB Load Capacity Side Mount Ball Bearing Metal Dresser Runners File Cabinet Trash Can Slider Kitchen Glides Black

  • ...ide】Length: 10"(254mm), full extension lengths: 20"(508mm),suitable for drawers with inner depth ≥ 10"-12". Left side mount clearance: 0.5" (12.7mm), right side mount clearance: 0.5" (12.7mm). There are 8 screws in the card box at both ends of the product.please push the inner ball bearing to the top of the slide rail first, then connect it with the slide rail. There are electronic installation instructions at the bottom of the link..
  • 【30-year service life】 Two sets of solid steel balls are used inside the ball bearing drawer slide rail to ensure smooth opening and closing of the slide rail. After testing, the number of smooth opening and closing of the slide rail has reached more than 100,000 times..
  • 【Double anti-rust】 The surface of the drawer slide rail adopts electrophoresis black process, which isolates the direct contact between water and air, prevents the slide rail from oxidizing and rusting, and improves corrosion resistance..
  • 【Double load bearing】 AOLISHENG drawer slides are made of 1.2mm high-quality cold-rolled steel, and the material is 1 times the thickness of ordi....
Check Stock

Leick Home SINCE 1910 Corner Computer and Writing Desk, Mission Oak Finish

  • Hand applied mission oak finish on hardwood solids. A 1-inch thick solid top is made to use, and a keyboard drawer is crafted with wood solids, ball bearing full extension glides, and stunning finished metal hardware..
  • Pull out drawer with a drop front lid for a laptop or keyboard and ball bearing full extension drawer glides.
  • Lower shelf for a computer tower and/or printer.
  • Wire retaining grommet on the back allows you to manage cords from the drawer.
  • Simple, knock-down assembly ensures that setting up is a snap. Simply attach the legs, slide the drawer in, and you're done!.
  • Hand applied mission oak finish on hardwood solids.
Check Stock

uxcell SCS12UU Linear Ball Bearing Slide Block Units, 12mm Bore Dia (Pack of 4)

  • Model: SCS12UU (Bearing No.: LM12UU, Nominal Shaft Diamter (dr): 12mm).
  • Aluminium Alloy Linear Ball Bearing Slide Block Units.
  • Light-weight housing and Chromium Steel bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

C.2109.16D Keyboard Slide 16'

  • 12" Accuride Full Extension Ball Bearing Drawer Slides.
  • Included: 1 Pair - Weight: 2.7 pounds - Size Specs: 12"L x 0.5"W x 1.8"H - Finish: Zinc.
  • 100 lb. Full Ext. Steel Ball Bearing Slide - Hold-in Detent prevents drawer roll-out & bounce-back.
  • Cam Drawer Adjust - Lever Disconnect - Easy access to 32mm & traditional hole pattern.
  • You will receive 1 pair drawer slides for the price listed - Limited Lifetime Warranty.
Check Stock

Alera ALEPAFFLG Two-Drawer 14-7/8 in. x 19-1/8 in. x 27-3/4 in. Metal Pedestal File Cabinet - Light Gray

  • Four casters (two locking) for mobility or four glides for stationary use..
  • Counterweight anti-tip mechanism prevents tipping..
  • High-sided file drawers include legal conversion bar..
  • Steel ball bearing slide suspension with 3/4 extension on box drawers and full-length extension on file drawers..
  • Two 12" high-sided file drawer with full steel ball bearing slide extension..
  • Visible, easy-access casters, two locking..
Check Stock

Accuride 3732 Full Extension Drawer Slide Pair - 18'

  • 22" Accuride Full Extension Ball Bearing Drawer Slides.
  • Included: 1 Pair - Weight: 4.0 pounds - Size Specs: 22"L x 0.5"W x 1.8"H - Finish: Zinc.
  • 100 lb. Full Ext. Steel Ball Bearing Slide - Hold-in Detent prevents drawer roll-out & bounce-back.
  • Cam Drawer Adjust - Lever Disconnect - Easy access to 32mm & traditional hole pattern.
  • You will receive 1 pair drawer slides for the price listed - Limited Lifetime Warranty.
Check Stock

uxcell SCS8UU Linear Ball Bearing Slide Block Units, 8mm Bore Dia (Pack of 4)

  • Model: SCS8UU (Bearing No.: LMF8UU, Nominal Shaft Diamter (dr): 8mm).
  • Aluminium Alloy Linear Ball Bearing Slide Block Units.
  • Light-weight housing and Chromium Steel bearing ball, good abrasion resistance, high precision and good strength.
  • Smooth moving, low friction, high rigidity and long working life.
  • Suitalbe for kinds of electronic equipment/guide bar, and pillar.
Check Stock

Drawer Slides, URBEST 10 Inch Full Extension 3 Section Ball Bearing Side Mounted Drawer Slider for Cabinet Kitchen (10-Inch)

  • Product Name : Ball Bearing Drawer Slides.
  • Feature : 2 Pcs, 3-fold Smooth Telescopic Slide.
  • Coming with 2 pieces 10 inch 3-section ball bearing drawer slides..
  • Good close mechanism performance adds a concealed piston to slowly draw the drawer smoothly and silently closed.
  • Material : Cold-rolled Steel with Steel Ball Bearings, Plastic.
  • Application: cabinets, desk pedestals and general storage drawers.
Check Stock

Drawer Slides, URBEST 8 Inch Full Extension 3 Section Ball Bearing Side Mounted Drawer Slider for Cabinet Kitchen (8-Inch)

  • Product Name : Ball Bearing Drawer Slides.
  • Feature : 2 Pcs, 3-fold Smooth Telescopic Slide.
  • Coming with 2 pieces 8 inch 3-section ball bearing drawer slides. (No screws).
  • Good close mechanism performance adds a concealed piston to slowly draw the drawer smoothly and silently closed.
  • Material : Cold-rolled Steel with Steel Ball Bearings, Plastic.
  • Application: cabinets, desk pedestals and general storage drawers.
Check Stock

AOLISHENG Heavy Duty Drawer Slides 40 Inch Full Extension Ball Bearing Cabinet Telescoping Sliding Rails Tool Box Runners Tracks Glides 100 lb Load Capacity Side Mount 1 Pair

  • ... access to the whole space, and the drawers can be pulled out completely for easy storage of items. The surface of the slide rail is treated with galvanized blue sealing process, which isolates the slide rail from direct contact with air and water, and enhances oxidation resistance and corrosion resistance..
  • 【Ball bearing drawer slides are removable】 Two sets of ball bearings are designed inside the slides, all of which are made of solid steel balls. In addition to maintaining the fluidity of the slides, they can also effectively increase the load-carrying capacity of the slides. Hidden detachable button on the back, press the detachable slide rail, easy to install and clean the drawer..
  • 【Installation requirements】 Dimensions: 39.37"(1000mm), full extension length: 79.13"(2010mm), installation clearance: left: 0.50" (13mm), right: 0.50" (13mm). You can choose the size of the rails according to the depth of the drawer. The length of the rail should be less than or equal to the drawer. Please refer to the image above..
  • 【Notes for slide rails】 1. Due to different usage scenarios, this product does not contain screws. You can buy M4 screws yourself. 2. When installing, please push the inner ball bearing to the top of the slide rail first....
Check Stock