ReviewsMini Breadboard

Gikfun Solder-able Breadboard Gold Plated Finish Proto Board PCB DIY Kit for Arduino Pack of 5PCS GK1007

  • This board is especially useful for preserving a prototype or experiment you just created on a solderless breadboard by soldering all the pieces in....
  • Breadboard PCB for any type Raspberry Pi GPIO.
  • Gold plated finish prevents oxidation, High quality Gold finish for easy soldering.
  • All holes are through-plated for strength.
  • Adaptable with a variety of MCU boards. Compatible with Arduino Nano, Pro Mini, NodeMCU, etc..
Check Stock

DaFuRui 170 Point Mini Breadboard Kit，12Pack Small Tiny Breadboard with Adhesive on The Back for Arduino [6 Colors]

  • Size: 1.8 x 1.3 x 0.3Inch/46 x 34 x 8mm(L*W*H).
  • Package Include: 10pcs x 170 Tie-points Mini Breadboard.
  • Self Adhesive Tape: With self-adhesive tape on the back, make it easy to stick on the Arduino Prototype Shield..
  • Solderless breadboard is convenient for the prototypes and circuit design experiment and other DIY projects..
  • Risk Free Shopping - Yohii hope to provide you a satisfied and happy shopping.Full refund is guaranteed if the item has any quality issue after....
Check Stock

eBoot 3 Pieces 400-Point Solderless Circuit Breadboard with 65 Pieces M/M Flexible Breadboard Jumper Wires

  • Breadboard with jumper wire set: 3 pieces 400-point solderless circuit breadboard.
  • 65 Pieces male-male flexible breadboard jumper wires.
  • Easy to use: the breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling.
  • Breadboard: plug and play, 400 tie points, peelable adhesive tape backing.
  • You had better clean the place you want to stick firstly, to make a good....
  • Breadboard jumper wires: good conductivity, it's hard to drop the head of the wire, can be applied repeatedly.
  • Compatible with electronic and electrical experiments.
  • The jumper wires are easy to insert into the breadboard.
Check Stock

YUEONEWIN 130 Pcs Breadboard Jumper Wires Kit 4pcs 400 & 830 Points Solderless PCB Breadboards and 126 Pcs Flexible Bread Board Jumper Wire Set for Arduino Prototyping Circuit DIY Electronic Project

  • 【Package Included】Solderless Breadboard Kit includes 2pcs 400-point breadboard, 2pcs 830-point breadboard and 126 pcs flexible breadboard jumpers,....
  • 【Material】400 and 830 connection point breadboards are made of high-quality ABS plastic panels and high-grade tin-plated phosphor bronze contacts,....
  • 【Design】There are metal strips under the breadboard board to connect with the holes on the top. Note that the top row of holes and the bottom row....
  • 【Wide Applications】This breadboard jumper kit can use 20-29 Awg (0.3-0.8mm) wires to interconnect any components, ideal for setting up test....
  • 【Service Guarantee】If you have any questions about these solderless breadboard kits, please feel free to contact us and we will reply within 24....
Check Stock

Aoicrie Jumper Wire Kit, 840 Pieces Preformed Breadboard Jumper Wire Kit,14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • This kit is the most complete Breadboard Jumper Wires set which contains high quality assorted U-Shape Jumper Wires, assorted solderless flexible jumper cables, tweezer, with which you can do all kinds of circuit experiments..
  • 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm. Note: The kit may also be equipped with a 26AWG jumper..
  • Easy to use : each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard ,all the colored jumper wire are pre-stripped and preformed right-angled, easy to insert it into breadboard..
  • Wide Application : designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects these breadboards wires are ideal for use with any breadboard, prototyping, prototype circuits, LED strip, test circuits and etc..
  • Package includes : contains 840 pieces U shape preformed breadboard jumper wire kit, 14 lengths, 60 pieces per size,Note: the breadboard wire is a little soft that convenient for changing its shape to do connect test.
  • if you find that it can't be inserted, please check whether the cable in the pin hole of a breadboard is in good condition or not.come with a f....
Check Stock

LGDehome Gold Plated Solderable Breadboard for DIY Electronics Projects Compatible with Arduino Soldering Projects Pack of 12 Black+Blue+Red+Green+Gold

  • Anti-Oxidation:High quality Gold plated finish to prevent oxidation,Accurate hole spacing,Board takes solder easily,and all holes are through-plated....
  • Wide application:Fit for a variety of MCU boards.Compatible with Arduino Nano, Pro Mini,ESP8266, NodeMCU,MCU boards etc.
  • Convenient to use:Perfect for moving projects from bread board to final project.Easy to connect to the components without using the header connectors.....
  • LeadFree and RoHS compliant for longer shelf life.
  • Package inlcuded:6 pack 2.05"x3.5" Gold-plated Solder-able Breadboard (2xBlak+2xBlue+2xRed)+5PCS Green double sided Breadboard+2 pcs Copper Strip....
Check Stock

SIM&NAT 12inch / 30cm 40 Pin Male to Female Dupont Wire, 40 Pin Male to Male, 40 Pin Female to Female Breadboard Jumper wire Ribbon Cables kit for Arduino Raspberry Pi 2 / 3 (120 PCS)

  • The pitch of each end of the wire is 0.1 inch (2.54mm).
  • 40 pin jumper Wire are easy to separate from the ribbon.
  • Suitable for Arduino breadboard kit project, PCB project, PC motherboard, DIY experiment, 3D printer and etc..
  • Package content: 1 * 40 pin male to female jumper wires, 1 * 40 pin male to male cable and 1 * 40-pin female to female cable (total 120pcs)Description.
  • The wires are easy to peel apart and great for making good looking prototypes.
  • Work on a Raspberry pi breadboard projects, Raspberry pi robot build, Breadboard prototyping, Arduino and ky-040 rotary encoders..
  • Insert onto the SW LED pin on the typical desktop computer mother board..
  • Test bread boarding projects or for any breadboard experimenter..
  • 1 * 11.8 inch 40 pin male to male Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin female to female Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin male to female Breadboard Jumper Wires.
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • -Arduino MEGA R3 (generic high quality) + USB cable -6xAA Battery holder (9VDC) -WiFi ESP8266 module -Model Bluetooth Master / Slave HC-05 -Box with plastic cells (organizer of components) -Shield for prototypes + Mini-Breadboard -Large Breadboard (830 points ) -Dupont Cables 10 * Female-Female + 10 * Male-Female + 10 Male-Male -Cable Jumper for breadboard -6 Push Buttons with multicolored caps -Joystick Module type PS2.
  • -RC-522 RFID Module with white RFID Card and RFID Keychain -High-precision RTC Real-Time Clock Module DS3231 and EEPROM AT24C32 -PIR Presence Sensor HC-SR501 -Distance measurement module HCSR04 -Sound sensor detector module with programmable threshold -LM35 temperature sensor -Tilt detector module -Servo SG90 motor -Stepper motor (5V) -Motor driver module for stepper motor ULN2003.
  • 5V Active Buzzer -5V Passive Buzzer -LCD 1602 16 characters * 2 lines -LED Display Driver MAX7219 -LED Matrix Display of 8*8 -7 Segments Display 1 digit -7 Segments Display 4 digits -Simple Relay Module - Infrared Remote Control 38kHz - 38kHz Infrared decoder receiver (type 1838) - Infrared phototransistor (Flame sensor) - Infrared LED - Light sensor (Photoresistor).
  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 *....
Check Stock

AUSTOR 840 Pieces Preformed Breadboard Jumper Wire Kit 14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • Package includes: contains 840 pieces U shape preformed breadboard jumper wire kit, 14 lengths, 60 pieces per size.
  • Wire Length: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm.
  • Easy to use: each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard.
  • Wide Application: these breadboards wires are ideal for use with any breadboard, prototyping, prototype circuits, LED strip, test circuits and etc..
  • Note: the breadboard wire is a little soft that convenient for changing its shape to do connect test.
  • if you find that it can't be inserted, please check whether the cable in the pin hole of a breadboard is in good condition or not.
Check Stock

DaFuRui Breadboard Jumper Wire Kit with 400-Point Breadboard、65pcs Multiple Sizes M/M Bread Board Jumper Wire、140 Pieces 2-125 mm U-Shape Preformed Jumper Wire Kit

  • ★【Excellent Quality】The kit is ideal for setting up a trial circuit, prototype or experimenting.A variety of colors, lengths, can be classified....
  • ★【Powerful Function】400 tie-points Solderless Breadboard, With self-adhesive tape on the back for easy bonding.65pcs 4.4in 6.3in 8.3in 10.3in....
  • ★【Easy to Install】The Breadboard Helper includes 2/5/7/10/12/15/17/20/22/25/50/75/100/125 MM 14 different lengths.Different colors: 140Pcs long....
  • ★【Widely Used】Can be used for wiring of breadboard circuits or where power or circuit connections.Proto-Typing Circuit，Electronic，Electrical....
  • ★【Package Content】1PCS 400 tie-points Solderless Breadboard，65PCS long and short solderless breadboard jumper kit，140Pcs 14 different....
Check Stock

SparkFun Compatible with Arduino Pro Mini Starter Kit - 5V/16MHz - Comes to get a Project Started

  • The Pro Mini is SparkFun's minimal design approach to Arduino running at 5V with a 16MHz bootloader. Does not come with connectors populated so that you can solder in any connector or wire with any orientation you need..
  • Includes: Compatible with Arduino Pro Mini 328 - 5V/16MHz, FTDI Basic Breakout - 5V, Breadboard - Mini Modular (White), USB Mini-B Cable - 6".
  • Also includes: Break Away Headers - Straight (40-pin), Jumper Wires Premium 4" M/M (30 pack), LED - Basic Red 3mm, LED - Basic Green 3mm, 2x Resistor 330 Ohm 1/6th Watt PTH, Break Away Headers - Right Angle (6-pin), 2x Female Headers (2-pin).
  • Pro Mini Features: ATmega328 running at 16MHz with external resonator (0.5% tolerance), 0.8mm Thin PCB, USB connection off board, Supports auto-reset, 5V regulator.
  • Pro Mini Features: Max 150mA output, Over current protected, Weighs less than 2 grams! DC input 5V up to 12V, On board Power and Status LEDs, Analog Pins: 8 Digital I/Os: 14, 0.7x1.3" (18x33mm).
Check Stock