ReviewsMini Car Amplifier Channel

MTX (2) S6510-44 10" 1000w RMS Subwoofers+Vented Sub Box+Mono Amplifier+Amp Kit

  • Package Includes: (2) MTX 10" Subwoofer Car Audio (1) Rockville KRYPTON-M3 4000w Peak/1000w Dyno-Certified RMS Mono 1 Ohm Car Amplifier Amp+Remote (1) Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC (1) Rockville Dual 10” Solo Baric L7/L5/L3 Vented Square Sub Enclosure Box 20 Drywall Wood Screws (Wood screws are the type of screws.
  • the screws are actually made of metal) 20 Feet of 14 AWG Blue Speaker Wire 4 Spade Terminals.
  • Features of S6510-44: MTX S6510-44 10" 1000 Watt Peak/500 Watt RMS Square 4-Ohm Car Subwoofer, RMS Power Handling: 500 Watts, Peak Power Handling: 1000 Watts, Recommended Amp Power: 250-500 Watts RMS, Impedance: Dual 4-Ohms, Frequency Response: 26Hz - 130Hz, Sensitivity: 84.5 dB, Volume Displacement: 45.65 cu in, Voice Coil: 2" inches, Mounting Depth: 6.625" inches Cut Out Diameter: 9.313" inches.
  • Features of RDVK10 : Rockville RDVK10 Dual Square 10" 1.2 Cu. Ft. Vented Subwoofer Enclosure. Designed Specifically For The Solo Baric L7/L5/L3 Series Subwoofers and Similar, Proudly Made In The USA, Using Only The Finest Quality Materials - For The Best Level of Performance From Your Subs!....
Check Stock

CT Sounds ATv2-125.4D 4-Channel 800-Watt Class D Competition Car Amplifier

  • 4 channel amplifier car audio rated 125W @ 4-ohm x 4-ch (14.4v).
  • Built using an advanced PCB board featuring industry-leading capacitors, high quality transformers and cutting-edge inductors to ensure this 4-channel car amplifier delivers the power you need to destroy the competition in the SPL lanes.
  • LED logo, plexiglass bottom, and reinforced tiffany style RCAs gives this car stereo amplifier a prestigious look that is guaranteed to turn heads.
  • Heavy duty heat sink design, high power MOSFET switching technology, and best in class internal components will ensure the car amplifier runs cool for even the most demanding playlists.
  • Equipped with a Diode 6A60 for reverse polarity protection along with a 4-way protection circuitry.
  • sleep easy at night knowing your 4ch car audio amplifier is protected.
Check Stock

Rockville SK510 PACKAGE 10 1200w Loaded K5 Car Subwoofer Enclosure+DB11 Amp

  • Loaded Sub Enclosure Features: Rockville Single 10" K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts.
  • Vent dimensions (inches): 2" x 6.5" x 8", Tuning frequency of enclosure: 35 Hz, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire.
  • Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote, CEA Compliant Power Ratings.
  • Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song) - 2 Ohm: 1400 Watts x 1 Channel, - 4 Ohm: 880 Watts x 1 Channel, High-Speed MOSFET Power Supply.
  • Features of wire kit:, Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 8 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable.
Check Stock

Pyramid PB918 2000 Watt MOSFET 2-Channel Car Audio Power Amplifier and Soundstorm AKS8 Complete 8 Gauge Car Audio Amplifier Wiring Installation Kit

  • PACKAGE INCLUDES: 1 Pyramid PB918 2000 watt MOSFET 2-channel car audio power amplifier system and 1 Soundstorm AKS8 8 gauge complete car audio RCA wiring installation kit.
  • AMPLIFIER: The Pyramid PB918 2 channel car amplifier features a MAX power handling of 1000 watts at 2 channels or bridged into 1 channel at 2000 watts. Other features include fully adjustable electronic crossovers, a variable gain control, a heavy duty aluminum alloy heat sink, and a high level molex input.
  • WIRING KIT: The amplifier installation wiring kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect.
  • DIMENSIONS: Dimensions: 10.24'' W × 2.26'' H × 9.06'' L.
  • WARRANTY: The amplifier and the wiring kit both include a 1 year manufacturer warranty.
Check Stock

ALPINE X-A90V 900 Watt 5-Channel X-Series Car Audio Amplifier Class-D+Amp Kit

  • Package Includes: (1) Alpine X-A90V 900 Watt 5-Channel X-Series Car Audio Amplifier Class-D Amp. (1)RockvilIe RWK42 4 Gauge 4 Chan Car Amp Wiring....
  • Low level: .2 - 4V. Frequency Response: 4-channel: 10 - 60,000Hz Sub channel: 8 - 400Hz. 4-channel: 10 - 60,000Hz. Sub channel: 8 - 400Hz. Total....
  • 4-channel: 10 - 60,000Hz. Sub channel: 8 - 400Hz. Features: RockvilIe RTR252 2 Channel - Dual 25 Foot High Grade Twisted Pair RCA Cable. Oxygen Free....
  • RockvilIe RWK42 4 Gauge 4 Channel Car Amplifier Wiring Installation Kit. (2) 17 High Grade Twisted Pair of 100% Copper RCA Cable. 17 4 Gauge....
Check Stock

Crunch PDX-1000.2 PowerDriveX 1000 Watt 2 Channel Exclusive Blue A/B Car Stereo Amplifier

  • 1000-WATT POWER: The Crunch PowerDriveX Car Stero Amplifier boasts 1000 Watts power.
  • 2 x 250 watts at 4 ohms, 2 x 500 watts at 2 ohms, 1 x 1000 watts at 4 ohms bridged.
  • 2 CHANNEL AMP: 2 Channel amplifier with Low noise pre amplifier with Rugged MOSFET pulse width modulation power supply.
  • Maximum low voltage signal from the source unit comes into the amplifier circuit with minimal distortion.
  • INPUTS/OUTPUTS: Low level RCA inputs and outputs.
  • Audio inputs: Unbalanced inputs (RCA) Audio outputs: Line output (RCA).
  • FEATURES: Flexible installation allows this amplifier to run in 2 channel or bridged mono mode.
  • Designed to be high sound quality with minimal distortion.
  • Maximum heat dissipation which minimizes distortion.
  • SPECIFICATIONS: Variable voltage: 0.2 5 volts.
  • Crossover type: Electronic switch FULL / LPF / HPF.
Check Stock

Orion Cobalt 4 Channel Amplifier – Class A/B Multichannel Amplifier 2250W RMS 4500W Max Car Electronics Car Audio Stereo Subwoofer 2 Ohm Stable Bass Boost MOSFET Amplifier for Car Speakers Sub Amp

  • Features – The 4 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Remote Bass Knob, 2-way protection, hi/low pass crossovers, hi/low level inputs, MOSFET Power Supply, Thermal Protection, Gain Control, 2 Ohm Stable.
  • Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class b amplifier has no current flowing..
  • Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • Power – This Class A/B 2500 watt Amplifier has a power rating distribution as followed 1125 X 4 MAX @ 2 OHMS. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in voltages. A high level (+/- wire) input is measured in wattages. Both essentially carry signal from your receiver to your amplifier to your speakers.
Check Stock

Rockville dB14 4000w Peak/1000w RMS Mono 2 Ohm Amplifier Car Audio Amp Bundle with Rockville RWK4CU 4 AWG Gauge 100% Copper Complete Amp Installation Wire Kit OFC

  • Package Includes: (1) RockvilIe dB14 4000 Watt/2000w RMS Mono Class D 2 Ohm Amplifier Car Audio Amp. (1) RockvilIe RWK4CU 4 AWG Gauge 100% Copper....
  • Features of dB14: RockvilIe dB14 4000 Watt Peak/1000 Watt Dyno-Certified RMS Mono 2 Ohm Amplifier Car Audio Amp. Dyno Certified RMS Power Ratings:....
  • Fully Adjustable 12dB / Octave Crossover with Differential Circuitry. Low Pass Filter: 50Hz - 250Hz. Subsonic Filter: 15Hz - 55Hz. Phase Control....
  • Amplifier Kit Key Features of RWK4CU: RockvilIe RWK4CU 4 Gauge 2 Channel Complete Car Amplifier Installation Kit 100% Pure Copper RCA Cables. 4 Gauge....
Check Stock

PYLE PRO PLPW12D Power Series Dual Voice-Coil 4ohm Subwoofer (12', 1,600 Watts)

  • SUBWOOFER: The Pyle PLPW12D sound is produced by a 2 Inch 4 layer high temperature dual voice coil with 60 oz. heavy-duty magnet, pushing 1,600 watt MAX power.
  • 2 CHANNEL AMPLIFIER: The Boss AR12002 2 channel car amplifier features a MAX power handling of 1200 watts including hi/low-level inputs and hi/low pass crossover..
  • AMPLIFIER KIT: This 8 Gauge amplifier installation kit has everything you need to install your amplifier in your car..
  • SUBWOOFER BOX: These TWO Q POWER QTW12 Single 12" Sealed Car Audio Subwoofer Box Enclosures feature solid 5/8" MDF construction, charcoal carpet covering, terminal cup connectors, 0.88 cubic feet of air space per Box, and a mounting depth of 5.5 inches.
  • DIMENSIONS: 6 1/2"W x 2 9/16"H x 11 11/32"L.
Check Stock

Orion Cobalt 4 Channel Amplifier – Class A/B Multichannel Amplifier 1750W RMS 3500W Max Car Electronics Car Audio Stereo Subwoofer 2 Ohm Stable Bass Boost MOSFET Amplifier for Car Speakers Sub Amp

  • Features – The 4 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Remote Bass Knob, 2-way protection, hi/low pass....
  • Class A/B – This multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high....
  • Quality - This Class A/B 4 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent....
  • Power – This Class A/B 2500 watt Amplifier has a power rating distribution as followed 875 X 4 MAX @ 2 OHMS. The 4 channel amplifier for car....
  • Low/High Level Inputs – The multichannel amplifier for car speakers come with low/high level inputs. A low level (RCA) input is measured in....
Check Stock

Bluetooth HiFi Mini Audio Amplifier - Class D Digital Desktop PC Stereo Amplifier Receiver (2 x 100 Watt MAX) Aluminum Diecast- Pyle PDA20BT, Micro Amp

  • DESKTOP AUDIO AMPLIFIER: Take control of your sound with hi-powered, mini-style component stereo amplifier performance - enjoy wireless streaming ability with the Mini Blue Series Home Amplifiers.
  • COMPACT SOUND CONTROL: Multi-channel amplifier design paired with convenient audio configuration unlocks home theater stereo system ability right on your computer desktop - gain access to digital sound control with compact amplifier receiver power.
  • BLUETOOTH STREAMING RECEIVER: Simple & hassle-free Bluetooth amplifier pairing allows you to connect and play your music to connected speakers and radio systems.
  • 2x100 WATT POWER: The 2 Channel Pyle Bluetooth Stereo Amplifier Receiver is perfect for your karaoke and home theater acoustic sound system. Gives you 200W power w/ 100W RMS, accommodates 2 sets of speakers, lets you enjoy high quality amplified audio.
  • VERSATILE MINI COMPONENT AMPLIFIER: Connect to external devices like radios, speakers and microphones - or use the 1/4’’ headphone jack for private listening from your home PC desk - features rear panel quick connect push-type speaker terminals.
Check Stock