ReviewsMini Float Level Switch

Rule 500 GPH 25SA Electronic Sensing Bilge Pump-500

  • Head: 4.0M, Wire Lead: 1M, Outlet Dia: 29mm(1-1/8"), Dimension: 5.92“*4.21"/150.5mm*107mm..
  • 【Switch】Built-in float switch: No float switch required.Pump turns on when water level rises & shuts off when water is removed. Snap-off strainer for easy cleaning.
  • 【Long life motor】 :Water cooled motors for long life, with anti airlock design and moisture tight seals.Heavy duty motors with stainless steel shafts and tough thermoplastic bodies..
  • 【Durable】: All (Auto) Bilge Pumps are built with compact, rust and corrosion protected stainless steel shaft, high-impact durable and thermoplastic ABS plastic housing..
  • 【Fast Speed】When water level rises,pump can turn on bout 1 1/2 inch when it’s sitting in the bottom of the bilge at the back of the boat. It definitely pumps the water out fast! 5 Gallons underneath motor and the pump spit it out in about 20 seconds..
Check Stock

Superior Pump 92333 1/3 HP Thermoplastic Pedestal Sump Pump

  • Large floats detect 1/4 in. water level rises, automatically activating the sump pump.
  • Second float provides additional protection to ensure automatic pump activation.
  • Protective float switch cage helps keep debris and wires from interfering with float movement.
  • vented, curved bottom reduces debris build-up under the float.
  • Allows the sump pump to run for an additional 10 seconds to drain excess water from the sump pit.
Check Stock

Pins & Needles (A Gracie Andersen Mystery Book 5)

  • Large floats detect 1/4 in. water level rises, automatically activating the sump pump.
  • Second float provides additional protection to ensure automatic pump activation.
  • Protective float switch cage helps keep debris and wires from interfering with float movement.
  • vented, curved bottom reduces debris build-up under the float.
  • Allows the sump pump to run for an additional 10 seconds to drain excess water from the sump pit.
Check Stock

BioCube Size 29 & Size 32 Replacement Pump

  • Type: 2PCS M16 Water Level Sensor, Switching voltage (Max): 110V DC.
  • Float level switch is a kind of liquid level control device with simple structure, no external power supply, no complicated circuit, convenient to use. Has the advantage of smaller size and longer service life than mechanical switch..
  • Mainly used to sense the liquid level in a tank to turn on/off a pump, an indicator , an alarm or other device..
  • 2 Way optional to install as normally closed/open switch according to your needs..
  • Suitable for hydroponics, saltwater , freshwater , gardening, aquariums for power control, pet bowls, fish tanks, filtration, heating etc..
Check Stock

mxuteuk 2 Pcs Side Mounted Horizontal Liquid Float Switch Water Level Sensor Black for Aquariums Tank DPL-1-BK

  • Temperature Rating: -30~125 degree Centigrade.
  • Max Switching Current: 0.5A ; Max Contact Resistance : 100m ohm.
  • Float Ball Size(Approx) : 2.3 x 1.7cm /0.9" x 0.67" (L*D).
  • The switch has the advantages of high sensitivity and durability. PP material is environmentally friendly and has excellent acid and alkali resistance..
Check Stock

Honda Power Equipment WSP73 3/4 HP 115V Submersible Water Pump, 50FT Cord New

  • 【AUTO FLOAT SWITCH】Equipped with an automatic float switch. When the water level higher than the pump, the pump will start working automatically under the control of float switch. When the pump fails to pump water, it will automatically disconnected the power.If the water level is higher than the pump again,it will work again..
  • 【POWERFUL SUMP PUMP】3040 GPH, 1/3 HP, Max Lift: 29 ft.
  • Acquaer submersible clean/dirty water pump moves up to 3040 gallons per hour rating tackles any draining job at a fraction of the time. Perfect for water supply, drainage in deep well, field irrigation garden irrigation and greenhouses..
  • 【INGENIOUS DESIGN】The higher base plate and top suction design helps eliminate air locks and filters debris. For safety, the pump motor has an automatic thermal protector that will turn off the pump if it becomes too hot automatically. Once the thermal protector detects that the pump has cooled to a safe temperature, it will allow the pump to operate normally..
  • 【HIGH-QUALITY MATERIALS】The submersible water pump is made of high-strength, corrosion-resistant reinforced thermoplastic materials. It will provide trouble-free service for a long time when properly installed..
  • 【CUSTOMER SATISFYING GUARANTEE】 Acquaer sump pump comes....
Check Stock

AIRTAK Bilge Pump for Boat DC12V 1500GPH Small Bilge Pump 12 Volt Electric Water Pump Low Noise with The Switch

  • Automatic mode connection :Contect black wire to negative,Contect brown white wire to positive,,brown no wiring.Non-Automatic mode connection :Contect black wire to negative,Contect brown wire to positive,,brown white no wiring..
  • Equipped with built in electronic controlled reed sensor system for easy fully automatic operation.
  • No power use until pump is activated by internal float switch (when water level rises).
  • Built-in float switch! (No separate float switch is needed).
Check Stock

THE BASEMENT WATCHDOG Model BWC1 Universal Replacement Sump Pump Float Switch

  • Large floats detect 1/4 in. water level rises, automatically activating the sump pump.
  • Second float provides additional protection to ensure automatic pump activation.
  • Protective float switch cage helps keep debris and wires from interfering with float movement.
  • vented, curved bottom reduces debris build-up under the float.
  • Allows the sump pump to run for an additional 10 seconds to drain excess water from the sump pit.
Check Stock

LONYE W10195039 Dishwasher Float Switch for Whirlpool KitchenAid Kenmore Maytag Dishwasher WPW10195039 MS10-06 PS11750031(Pack of 2)

  • ????Package includes 2 pcs W10195039 Dishwasher Float Switch.
  • ????W10195039 switch replaces AP6016738, PS11750031, W10734532, WPW10195039.
  • ????WPW10195039 switch works with the following brands: Whirlpool, KitchenAid, Kenmore, Maytag, Amana, Jenn-Air, Inglis..
  • ????Float switch WPW10195039 shuts the water fill valve off if the water level gets too high before the timed fill cycle ends..
  • ????MONEY-BACK GUARANTEE:For any product problem you’re not completely satisfied, you can ask for full refund..
Check Stock

QWORK Stainless Steel Floating Ball Float Valves 1/2 inch DN15 Adjustable Male Thread Water Float Sensor Hydraulics, Pneumatics & Plumbingall

  • Float valves use a rod and float ball attached to a valve shutoff lever to control.
  • Floating Ball Material: 304 Stainless Steel.
  • Designed with G1/2 inch thread that is normally used, can fit many pipe connection.
  • This float valve has a high-temperature rubber seal, durable to aging for long time use for better sealing and makes sure no leaking.
  • Widely used in magnetic level switch and liquid level measurements.
Check Stock

MUDUOBAN 2 Pack Float Valve for Stainless Steel Automatic Waterer Bowl Horse Cattle Goat Sheep Pig Dog Water Trough Farm Supplies Livestocktool

  • Used for 304 stainless steel water bowl, durable, no rust, no deformation, clean and sanitary.
  • The use of float water level floating principle control the inlet and outlet water switch, to achieve a constant water level effect, keeps enough water and always clean water.
  • Float valve for water trough horse cattle auto filter.
  • Significantly save more than 30% of the water when cattle drinking, reduce the sewage discharge pressure.
  • Automatic bowl tank horse dog cattle Water Leveler PVC Auto Fill Float Valve.
Check Stock