ReviewsMini Itx Case 3

Segotep Slath Mini ITX PC Gaming Computer Case Double Curved Tempered Glass Side Panel GPU Vertical Mounting Cable Management System SFX PSU Supported Slath Mini

Double curved tempered glass panel, IMAX borderless field of view, graphics card can be seen on three sides..
Designed for MINI ITX graphic card, MAX GPU length is 200mm..
Supports Mini ITX motherboard, SFX PSU and 240mm radiator..
High efficiency cooling design, 2 x 120mm reverse cooling fan which installed in bottom of the case, 240mm water cooling supported on the rear and special power supply cooling holes..
Great cable management, hidden cables design on the top, magnetic washable dust-proof net..

❤80MM SLIM DESIGN: 12v dc 80mm slim pc computer fans designed for narrow space diy project cooling system and small ITX pc case or water-cooling radiator fan replacement..
❤FAN SPECIFICATION: 80mm small 12v dc cooling fan 3.15inch x 3.15inch x 0.59inch with 12v dc 0.15a 1.8w at speed 800-2200rpm airflow: 22.8cfm noise level :26.8dBA(max) cable length:40cm 15.75inch..
❤4PIN PWM FAN:80mm 4Pin PWM case fan to be fit for 4pin CPU PWM fan port or water-cooling radiator. motherboard will adjust the fan speed from 800RPM-2200RPM according to inner working temperature automatically..
❤WIDE APPLICATION: 12v 80mm 8015 slim cooling fan with 4pin 4 wire pwm function for diy moderm cabinet projects cooling system , as replacement fan for electronics device equipment & water-cooling radiator ,build small mini-itx atx case cooling and diy gpu cooler fan of mining rig frame..
❤HYDRAULIC BEARING: Hydraulic bearing up to.

【Powerful Cooling System】10pcs 120mm GIM ARGB fans are pre-installed for the case to provide lighting and excellent air performance at the same time, keep cooling. And GIM Gaming Case supports ATX, Micro-ATX and Mini-ITX motherboards. (The actual fans you received may change depending on the shipment batch).
【More Space】Gaming pc Case has 2pcs 4mm-thick tempered glass full-view side panels. The internal space is wide and easy to install 3 x 2.5" SSD ；2 x 3.5" HDD；ATX/Micro ATX/ITX motherboard.
10*120mm ARGB Fan,maximum length 400mm GPU, And the flexible configuration of the cooling system supports 3x designated areas for the installation of water coolers with radiators of 360, 240 and 120 mm..
【ARGB Lighting System】: Mid-Tower ATX Gaming PC Case comes with 10 GIM KB-11 RGB case fans(120mm white Addressable speed adjustable fans) and 1 RGB Backplate and 1 GIM hub. The ARGB lighting system can be controlled via the include remote, create an amazing lighting show while providing great cooling..
【Super Cable Management】: A big space behind the motherboard tray for hidden cable management, where....

Size:308 x 190 x 128 mm(12.12 x 7.48 x 5.04 inch),extremely small ITX computer case.
Suitable for ITX motherboard(170 x 170 mm).
Compatible with 300mm long dual graphics card, 2.5 inch SSD hard disk..
Support SFX power supply,the height limit of CPU fan is 60mm.
Package include:1 set of mini Computer Case.

Mini-ITX/DTX case: support Mini ITX /DTX motherboards.
Premium aesthetics: 4mm tempered-glass panels with sleek aluminum frame and Aura Sync lighting.
Patented 11°Tilt design & Optimized airflow & Extra cable routing space: With 11° tilt design, providing an additional 40 mm of space at the back of the motherboard for optimal cooling around CPU, GPU ,the M.2 SSD that can be installed on the back of the motherboard, as well as extra space for easy cable management..
Ready for powerful components: Supports ATX PSU, 3-slot graphics card without a riser cable, up to five fans, 240mm radiator and water-cooling pump and reservoir.
Extensive connectivity: A built-in extension hub and rich front panel I/O ports, including USB 3.2 Gen 2 Type-C, two USB 3.2 Gen 1 Type-A and ARGB control button, make connecting components and devices a breeze..

Size: extreme small size (9 x 7.4 x 3.5in ) design to fit in both Mini-ITX motherboard and Flex PSU (5.9 x 3.2 x 1.6in)..
Cooling system: abundant heat emission holes including front panel, are designed to solve common cooling problem of mini computer case..
Extension design: a slot of PCIE, two WIFI holes, and two USB 3.0 and HD audio..
CPU cooler: no taller than 75mm when install a M.2 hard disk.
no taller than 60mm when install a 2.5” SSD on top.
Portability: small volume (3.8L) allow it easy to be put in backpacks, luggage and on desktop..

Excellent Heat Dissipation: The open chassis design is completely exposed for heat dissipation, freeing up the internal space of the chassis..
Open Frame Computer Case: The split hardware structure is adopted, and the open structure provides you with a large internal installation space..
DIY ITX MATX ATX Computer Case: Bare block frame, easy to disassemble, easy to assemble, stackable, fully experience the fun of DIY..
ATX/M-ATX/ITX Motherboard Case: Support ATX, M ATX, ITX motherboard, power supply supports ATX ordinary large power supply, support expansion of 1 x 3.5, 1 x 2.5 inch hard disk storage, support 7 PCI expansion slots..
Aluminum PC Open Air Case: Made of aluminum, it is strong, durable, stable in use and has a long service life..

The Tower 100 Mini ITX Chassis is the mini version of our iconic case The Tower 900.
4mm Thick Tempered Glass Window Panels: three 4mm thick tempered glass window panel at front, left, and right.
Handy I/O Port and unique internal design: with a high speed Type-C connector and two USB 3.0..
The Tower 100 supports up to two 3.5’’ HDD or four 2.5’’ SSD, include two bracket for 2.5’’ SSD at right side..
Dust Filter Design: Eight super fine filters on the right, left, top, and at the bottom are designed to provide excellent protection against dirt and dust from the outside of the case and is easily removable for cleaning..