ReviewsMini Precision Angle Gauge

KAKO Adjustable Magnetic Gauge Tool,Camber Castor Strut Wheel Alignment Tool for Car/Truck Camber/Castor Strut Wheel Alignment and Tire Repair

  • This adjustable magnetic gauge tool also it could be used as a normal gradienter (Magnetic mount could be released),It has a simple leveling adjustment from -5 degrees to 5 degrees.The body of gauge is made of high density aluminum and precision level vial..
  • Satisfaction guaranteed! Try any product we sell for a full 30 days. If not completely satisfied, return it to us for a no-hassle refund or credit..
Check Stock

NEW QEP ROBERTS 10-56 ELECTRIC 6" LONGNECK JAMB SAW KIT WITH CASE

  • Adjustable cut height from flush to 1" above floor level.
  • Dual-angle depth gauge allows cutting at "straight on" or 45° angles to the wall.
  • Visual depth gauge scale provides precision depth control at 1/8" increments.
Check Stock

GODESON Presta Valve BicycleTire Pressure Gauge 0-160psi and 0-11bar

  • 1. Reliable Mechianical Bike Tire Pressure Gauge presta AS CHRISTMAS GIFT - Bourden tube mechanism, no batteries required, keep high accuracy and good....
  • 2. Legible 1.5’’ dail with the special chuck for Presta Tire Valves-Easy to read , and operate.
  • When testing ,keep the gauge chuck angle consistent....
  • 3. Pressure range of pressure gauge presta from 0 to 160psi/ 0 to 11bar –Dual scale with English and Metric,easy to ready for different people.
  • 4. Mini size fits handlebar pack or seat pack-Easy to Carry pressure gauge presta.
  • 5. Excellent air valve botton- Durable,for tire deflation adjustments or reset the dial..
Check Stock

COMeap (2-Pack) Motherboard ATX Mini 4 Pin to 2X Right-Angle SATA Hard Drive HDD Power Adapter Cable for Lenovo 18-inch(46cm)

  • 『Mini 4P - 2x Right-Angle SATA』Mini 4 Pin port plugs into Lenovo motherboard (NOTE: It is mini 4 pin port, not standard 4 pin port. Please refer to the image 2nd for mini 4 pin port's dimension.), Right-angle 15 Pin SATA port plugs into the hard drive.
  • 『Connectors』Connector A: ATX 12V mini 4 pin (NOTE: not standard 4 pin. Please refer to the image 2nd for mini 4 pin port's dimension), Connector B: 2x Right-angle SATA 15 pin (compatible with the equipment with sata port such as: liquid CPU cooler, mechanical hhd and ssd).
  • 『Compatibility』ONLY compatible with Lenovo motherboard with mini 4 pin port including: M410 M415 M510 M510S M510A M610 M710 B415 B250, Thinkcentre m720 tower, ThinkSystem ST50 Servers, ThinkCentre M710t.
  • (NOTE: It is mini 4 pin port, not standard 4 pin port. Please refer to the image 2nd for mini 4 pin port's dimension.).
  • 『Parameter』Gauge: 18AWG, Length(including connectors): 18 inches(46cm),Between 2 SATA: 2.36 inches(6cm),Between 2 SATA: 8 inches(20.5cm), Quantity: 2 pieces, Self-adhesive tape*1pcs.
Check Stock

CIGARLOONG Cigar Cutter Stainless Steel Bronze Engraved Double Cut Blade (Color:Gold1)

  • MATERIAL:Body Using Copper Material,Carved Fine Flower Pattern with Soft Touch Comfortable to Feel. High-Grade Solid Construction and great weight..
  • CUT DIAMETER:Excellent for all size and large ring gauge cigars up to 60-ring gauge. Comes with a leather pouch to keep your cutter safe on the go..
  • FEATURE:Self-Sharpening Double Blades and Cuts Cigars Clean and Precision..
  • CARVED PULL RING:Put your Thumb and Forefinger into Two Rings, Then Pull Hard,Cigar and Scissors at 90 Degree Angle,Cuts cigars Clean and with Precision..
  • CIGARLOONG SERVICE: If You Have Any Quease with Our Product, Do Not Hesitate to Contact us and We will be more than Pleasure to Ensure You Have a Positive Experience while Using Our Product. We will give a satisfactory answer within 24 hours..
Check Stock

CIGARLOONG Cigar Cutter Stainless Steel Bronze Engraved Double Cut Blade (Color:Silver1)

  • MATERIAL:Body Using Copper Material,Carved Fine Flower Pattern with Soft Touch Comfortable to Feel. High-Grade Solid Construction and great weight..
  • CUT DIAMETER:Excellent for all size and large ring gauge cigars up to 60-ring gauge. Comes with a leather pouch to keep your cutter safe on the go..
  • FEATURE:Self-Sharpening Double Blades and Cuts Cigars Clean and Precision..
  • CARVED PULL RING:Put your Thumb and Forefinger into Two Rings, Then Pull Hard,Cigar and Scissors at 90 Degree Angle,Cuts cigars Clean and with Precision..
  • CIGARLOONG SERVICE: If You Have Any Quease with Our Product, Do Not Hesitate to Contact us and We will be more than Pleasure to Ensure You Have a Positive Experience while Using Our Product. We will give a satisfactory answer within 24 hours..
Check Stock

Accu-Gage RA30X 5-30 PSI Right Angle Chuck Dial Tire Pressure Gauge with Hose

  • Gauge has a full geared, precision movement with bronze bourdon tube.
  • unlike piston-plunger-type gauges, the bourdon tube movement is not affected by....
  • Right angle chuck with flexible 11 inch hose between gauge and chuck for hard to reach tire valves.
  • Durable steel case with polished brass bezel, stem, pressure release valve assembly and a 2 inch dial.
  • 5-30 PSI steel case gauge (recommended for tire pressures 8-23 PSI).
  • Needle holds pressure reading until released and a pushbutton valve bleeds air to desired tire pressure.
Check Stock

POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” Multi –Track Fence with 27 Angle Stops

  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop.
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results.
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right.
  • Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts.
  • Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
Check Stock

Machinery Repairman

  • ... speeds. Operate either manually or with the adjustable auto feed rate. Emergency stop buttom included..
  • Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Backsplash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.01mm. A free lamp is included..
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
  • Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works..
Check Stock

iGaging Layout Square Set of Two 7\ & 12\ w/Center Finder Bevel Gauge

  • Set of 2 squares 7" & 12" 3 in 1 tool Layout Square - Angle Gauge - Center Finder.
  • Precision CNC Solid Single-Frame construction blade & base for guaranteed 90 degree square.
  • Laser engraved over anodized aluminum for precision and permanent markings.
  • Marking holes for every 16th of an inch for precise marking.
  • Magnetic Base. Includes mechanical pencil 0.7mm to fit the holes..
Check Stock

BestEquip Metal Lathe 7\ x 14\

  • ...eed rate. The hardness and accuracy of the v-slide ways are obtained by raw material, heat hardening and grinding. Emergency stop button included..
  • Accurate 3-Jaw Chuck: Mini metal lathe chuck, 3-jaw self-centering chuck, for setting cylindrical materials steadily. Back splash guard included. Spindle is supported by precision tapered roller bearings, spindle accuracy within 0.0004" / 0.01 mm..
  • Professional Compound Rest: The mini metal lathe quick change tool post can achieve positions of internal cutting, face cutting and bevel cutting by changing the tool post angle and adjusting the compound rest. Professional cross slide is designed with abrasive resistance, moving blades freely with feed rod..
  • Wide Application: Driven by DC motor, this mini metal lathe cut off tool can be used in areas such as mini precision parts processing, sample processing and modeling works..
Check Stock