ReviewsMini Sata

ROIPETK Mini 4-Pin to 2X Right Angle SATA Hard Drive Power Adapter Cable for Motherboard SATA Hard Drive Power Cable 18" (2Pack)

  • Connector 1: ATX 12V mini 4-pin connector..
  • Connector 2: 2 right-angle SATA 15-pin connectors..
  • Usage: The mini 4-pin connector plugs into the motherboard and the right-angle 15-pin SATA connector plugs into the hard drive..
  • Compatibility: This cable is compatible with motherboards with mini 4-pin ports (compatible with devices with SATA connectors, such as liquid CPU coolers, mechanical hard drives and SSDs), including. m410 m415 m510 m510s m510a m610 m710 b415 b250, thinkcentre m720 tower, st50 Server.
  • Specification. Length: 18 inches (46 cm).
Check Stock

CableCreation [Reversed Cable] Mini SAS 36Pin (SFF-8087) Male to 4 SATA 7Pin Female Cable, Mini SAS (Target) to 4 SATA (Host) Cable, 0.5M, 1.6 Feet

  • Mini SAS 36 (SFF-8087) Male is host, 4x SATA female is target.
  • Mini SAS 36pin SFF-8087 Male connect to the controller, 4x7pin SATA connect to the backplane..
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access..
  • SAS forward breakout cable P1 to P4 markers provide easy recognized after installation.
  • Gold-plated SATA port ensure strong and secure connection..
  • Mini SAS fast data transfer cable will allow for a smooth transition from 6Gb to 12Gb..
Check Stock

Mini SAS Cable with SATA Power, CableCreation Internal Mini SAS 36 Pin to 4 x 29 Pin Cord with SATA Power, SFF-8087 to SFF-8482 Cable, 3.3 FT

  • Please note that this Mini SAS (SFF-8643) to 4x SATA Cable, SFF-8643 is host , connect to the motherboard or RAID Controller with Mini SAS ports. 4x7Pin SATA is the target , connect to the hard drives with SATA port.
  • Before you buy this cable , please make sure the Mini SAS (SFF-8643) on your motherboard or RAID Controller. If the Mini SAS (SFF-8643) on your backplane, this cable will not work with them.
  • SFF-8643: the new connector uses less PCB real estate and allows higher port density for internal hosts and devices. Hybrid versions of these new cables will allow for a smooth transition from 6Gb to 12Gb.
  • Serial Attached SCSI (SAS) is a high-speed data storage interface designed for high-throughput and fast data access.
Check Stock

GeeekPi Raspberry Pi Mini Tower NAS Kit, Raspberry Pi ICE Tower Cooler with PWM RGB Fan, M.2 SATA SSD Expansion Board, GPIO 1 to 2 Expansion Board, 18W QC3.0 Power Supply for Raspberry Pi 4 Model B

  • This Raspberry Pi Mini Tower NAS kit contains an M.2 SATA SSD expansion board which can expand the mass storage for your Raspberry Pi. The case is made of ABS material,This kit turns your Raspberry Pi into a mobile mini-host..
  • NOTE: The RGB light on Fan and mood light will not light up unless installed driver, and OLED will not display any information untill you have enabled it !!! Please read the manual carefully and follow the steps to enable it.Please purchase M.2 SATA SSD 2280 mass storage device, It dose NOT support NVME SSD!!!.
  • The 0.96 inch OLED screen was already mounted on the case.28x64pixels, default I2C address: 0x3C.
  • M.2 SATA SSD 2280/2260/2240 mass storage adapter board,supports up to 2TB M2. SATA SSD solid-state drive.
  • Package Includes: 1 x ABS Mini Tower Case,1 x ICE-Tower CPU Cooling Fan,2 x Acrylic Side Panel,1 x 0.96inch OLED Display (Already mounted on the case ),1 x GPIO Edge expansion board,1 x M.2 SATA SSD Shield,1 x QC 3.0 Power supply,1 x Assembly manual(Note: Raspberry Pi 4B is Not included in the package).
Check Stock

NFHK 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD to SATA 3.0 III Adapter Converter PCBA

  • 2 in 1 Combo Mini PCI- E 2 Lane M.2 NGFF & mSATA SSD to SATA 3.0 III Adapter Converter PCBA, 2.5" SATA SSD Form Factor : 98 x 65.5mm.
  • M.2 (NGFF) & mSATA to SATA III Module, Build in Mini PCI-e 52pin Female connector, Build in M.2 (NGFF) B key Female connector, Insert both M.2 & mSATA....
  • PCI Express M.2 Spec. Revision 0.7, Version 1.0, PCI Express Mini Card Electromechanical Spec. 1.2, PWM synchronous buck converter Power IC.
  • 3A maximum output current, Short circuit protection, In-rush current suppression, Thermal shutdown protection, ESD HBM (Human Body Mode)/2KV.
  • the MSATA and NGFF SSD cannot work at same time. The adapter only work for B-key or B/M-key socket NGFF SSD, cannot work for M-key socket..
Check Stock

zdyCGTime 8-Inch 4 Pin Floppy Drive to 15 Pin SATA Male Power Cable(2-Pack)

  • It converts a SATA Power 15pin connector into a 4pin Mini power connector.
  • Power connector for Devices requiring a Mini connection.
Check Stock

Mini SAS Cable SFF-8087 Left Angle to SFF-8087 Left Angle Internal mSAS Cable 1.3FT

  • [ Cable Type ] : Mini SAS SFF-8087(36pin) to Mini SAS SFF-8087(36pin), Mini SAS data cable directly connects a RAID or PCI Express SAS controller to....
  • [ High Performance Cable ] : High performance internal Mini Serial Attached SCSI (SAS) is a high-speed data storage interface designed for....
  • [ Compatibility ] : Compatible with Servers, RAID systems, Storage systems, SAS/SATA HBA interfaces, Direct-attached storage (DAS) and Raid Cards.....
  • [ Connectors ] : Host Side : SFF-8087, on your motherboard or RAID controller. *** Target Side : SFF-8087, which port connect to the SAS/SATA Hard....
Check Stock

Mailiya PCIe SATA Card with 4 SATA Cables, 4 Ports SATA 3.0 6Gbps Controller Expansion Card, Low Profile Bracket and Heatsink, Non-Raid, Support 4 SATA 3.0 Devices

  • With 4 Ports SATA card, you can add 4 SATA III 6 Gbps devices to your computer, and the equipped 4 cables simplifies the connection..
  • PCIe SATA III card based on ASMedia ASM1064 chip, more stable and wider compatible. you could make the system to boot from this SATA Card but non Raid, no raid keeps your data more safety..
  • Support interface: PCIe x1 slots, support PCI-e X4/ X8/ X16 at the same time. Compatible with Serial ATA(SATA) Revision 3.0 specifications, auto switch to SATA 3.0 speed 6Gbps max. Backwards compatible with SATA 1.0 and SATA 2.0..
  • Equipped with low profile bracket can also works for mini PC, and special made heatsink will keep your device under good performance and full-load operation..
  • The SATA expansion card works for Windows OS/MAC/NAS/Ubuntu, perfect for gaming pc and IPFS Mining Rig. Plug and play, no driver needed..
Check Stock

Delkin 128GB Power CF Express Type B Memory Cards - 1730MB's Read/1440MB's Write, 2 Pack

  • Multifunctional: USB3.0 interface, SATA interface, large 4PIN IDE power socket or DC12V power supply socket, card reader, etc. are extended through the optical drive position or floppy drive position of the computer case..
  • With NGFF M.2 MSATA: Multi-Function USB 3.0 Hub CF TF M2 SD MS Card Reader Fan Controller equipped with SATA NGFF M.2/Msata SSD, supports M.2 SSD with SATA M.2 B key NGFF specification and mini SATA SSD..
  • OTB One Click Backup: OTB one click backup, can easily and quickly transfer files from PC to hard drive..
  • Internal and External SATA: The external SATA provides power and data transmission, and the SSD/HDD hard disk switch controls the internal SATA hard disk to turn on and off..
  • Support System: Internal Memory Card Readers Support for WinXP, for Vista, for Win7, for Win8, for Win10, for Linux, for OS X, etc..
Check Stock

CableCreation SATA III Cable, [5-Pack] 8-inch SATA III 6.0 Gbps 7pin Female Straight to Straight Angle Female Data Cable with Locking Latch, 0.6 FT Blue

  • SATA revision 3.0 (aka SATA III) provides up to 6 Gbps data throughput, Backwards compatible with SATA revision 1 and 2 (aka SATA I and SATA II).
  • This Cable connect motherboards and host controllers to internal Serial ATA hard drives and DVD drives.
  • 8"/0.2M Length Ideal for Mini ITX, Intel NUC, and Other Small Form Factor Computers.
  • Includes locking latch on each end of the cable to ensure it doesn't work itself loose.
  • Package include 5 x SATA III Cable, we offer 2-years warranty.
Check Stock

Highpoint RocketStor 6418S 8-Bay 6Gb/s SAS/SATA Tower Enclosure

  • External 8-Bay 6Gb/s SAS/SATA Tower Enclosure.
  • Each Hot-Swap Drive Tray supports 2.5″/3.5″ SAS/SATA HDD/SSD.
  • Designed for use with RocketRAID 4522, RocketRAID 2722, RocketStor 6328L, RocketStor 6328, RocketRAID 3622..
  • Optional Cable (not included): Ext-MS-1MMS – Mini-SAS to Mini-SAS Cable.
Check Stock