ReviewsMini itx Board

8dBi WiFi Antenna RP-SMA Male Wireless Network 2.4GHz 5.8GHz Dual Band with U.FL/IPEX to RP-SMA Female Pigtail Cable for Mini PCIe Card Wireless Routers, PC Desktop, Repeater, FPV UAV Drone, PS4-2PCS

• High quality, high effective Increases the range of your wireless device, connector type: IPEX MHF4 to RP-SMA Female,Length: 15cm/5.9”..
• 8dBi WiFi antenna omni-directional is with 2.4GHz and 5.8GHz dual band, high gain and can extend wireless range to dead spot..
• WiFi RP-SMA male antenna is used high quality circuit board which ensures maximum and stable signal quality. Easy to install and increase signal strength..
• Dual band wifi antenna works with most wireless devices, such as Mini PCIe Wireless Card Routers / Repeater / Range Extender / Desktop PC / Mini ITX Build / PCI Card / FPV UAV Drone / PS4 Build. o make your desktop great increased work performance..
• This U.FL Antenna is only Used for MINI PCI-E interrface, Do Not Use for M.2 (NGFF) Interface, please check your connectors before purchasing..

2 x 8dBi WiFi RP-SMA Male Antenna 2.4GHz 5.8GHz Dual Band +2 x 15CM U.FL/IPEX to RP-SMA Female Pigtail Cable for Mini PCIe Card Wireless Routers, PC Desktop, Repeater, FPV UAV Drone and PS4 Build

• OMNI-DIRECTIONAL WIFI ANTENNA- This 8dBi omni-directional is with 2.4GHz and 5.8GHz dual band, high gain and can extend wireless range to dead spot.
• PIGTAIL SPECIFICATIONS- Connector type: IPEX MHF4 to RP-SMA Female,Length: 15cm/5.9”.
• STABLE SIGNAL TRANSFER- The WIFI antenna is used high quality circuit board which ensures maximum and stable signal quality. Easy to install and increase signal strength.
• WORK WITH- This wireless antenna works with most wireless devices, such as Mini PCIe Wireless Card Routers / Repeater / Range Extender / Desktop PC / Mini ITX Build / PCI Card / FPV UAV Drone / PS4 Build. WARM NOTICE: this wireless router antenna only use for MINI PCI-E Interface, Do Not Use for M.2 (NGFF) Interface, please check your connectors before purchasing.
• PACKAGE INCLUDES- 2X 8dBi WIFI antenna+ 2X 15CM U.FL/ IPEX to RP-SMA Female Pigtail Cable.

Lian Li O11 Dynamic mini Snow White Mini Tower Computer Case - O11D MINI-S

2 x 8dBi 2.4GHz 5GHz 5.8GHz Dual Band WiFi RP-SMA Male Antenna+2 x 35CM U.FL/IPEX to RP SMA Female Pigtail Cable for Mini PCIe Card Wireless Routers PC Repeater Desktop FPV UAV Drone PS4 Build

• High gain WIFI antenna- This 8dBi Omni-directional antenna with dual band 2.4GHz / 5.8GHz and RP-SMA Male connector which reduces interference, extend wireless range to dead spot.
• Pigtail Specifications- Coming with 2 pieces connector cables,Length: 35cm including the connectors.
• Connector type: U.fl / IPEX (MHF2) to RP-SMA Female.
• High quality- The WIFI antenna case is made of hard plastic, sturdy and durable. The internal is using high quality circuit board ensures maximum and stable signal quality.
• Multi-use- This wireless antenna works with most wireless devices, such as Mini PCIe Wireless Card Routers / Repeater / Range Extender / Desktop PC / Mini ITX Build / PCI Card / FPV UAV Drone / PS4 Build. WARM NOTICE: this wireless router antenna only use for MINI PCI-E Interface, Do Not Use for M.2 (NGFF) Interface, please check your connectors before buying.
• Easy to install- This wireless wifi antenna is easy to install, Simply replace current antenna to increase signal strength.

A4 Compact ITX PC Case A50 G5 K55 SFX Computer Case Aluminum Mini-ITX Small Computer Case Test Bench Mini Computer Host Tempered Acrylic Side Panel B2

• Size:312 x 245 x 140 mm(12.28 x 9.64 x 5.5 inch),small ITX computer case.
• Suitable for ITX motherboard(170 x 170 mm).
• 2 mute fans on the top of the PC case,extremely strong heat dissipation function.
• Package including:1 x mini computere case.

EDIY ITX Mini A4 Computer Case 7.5L Aluminum Mini-ITX Motherboard Small PC Case Test Bench Support SFX Power Supply 300mm Vedio Card Transparent Acrylic Side Panel

• Size:308 x 190 x 128 mm(12.12 x 7.48 x 5.04 inch),extremely small ITX computer case.
• Suitable for ITX motherboard(170 x 170 mm).
• Compatible with 300mm long dual graphics card, 2.5 inch SSD hard disk..
• Support SFX power supply,the height limit of CPU fan is 60mm.
• Package include:1 set of mini Computer Case.

JGINYUE H97 Mini ITX Motherboard, White LGA 1150 Motherboard Support Intel i5 i7/Xeon E3 (DDR3/M.2 NVME/M.2/VGA DP HDMI-Compatible/PCIe X16/SATA 6Gb/s/2 Gigabit Ethernet)

• LGA 1150 Mini ITX Motherboard: Equipped with LGA1150 CPU socket, supporting Intel i5/i7 and Xeon E3 series processors..
• Three image transmission interfaces: This mini itx gaming motherboard supports VGA, DP, and HDMI-compatible high-definition high-performance graphics and audio signal display, you will have more choices in configuration..
• Dual M.2 slots: The Intel motherboard with M.2 NVME protocol (support NGFF) slot, transmission power up to 32Gbps. Can support M.2 NGFF card.
• DDR3 dual-channel memory: The LGA 1150 computer motherboard supports dual-channel Non-ECC Unbuffered DDR3, 1600/1333Mhz effective frequency. The maximum memory capacity is 16G..
• Stable power supply: 4-phase power supply CPU stable power supply, all solid-state capacitor design, equipped with 24+8 pin power interface, to ensure the stable operation of the motherboard..

JONSBO N1 Mini-ITX NAS Chassis, ITX Computer Case, 5+1 Disk Bays NAS Mini Aluminum with Steel Plate Case, Built-in 14cm Fan, Only SFX Power Bite, Support H 70mm CPU Cooler

• 5+1-Disk Bays NAS Mini Aluminum Chassis - * 5x3.5” HDD hard disk bays for high-capacity storage, making work and life coexist peacefully.
• 1x 2.5”SSD disk bay ADAPTS to SSDS. High-speed hard disks provide fast response to frequent data use Application :Home office / network storage / enterprise storage and other fields Stand up & Lie down Available Easy to install by Pulling PCI Low Profile expansion slot : .
• Built-in 14CM fan with large air volume and low noise Front Interface :Type-C (20PIN)/USB3.0*1/AUDIO*1+MIC*1(2 IN 1)Mini Chassis size : W170 x D354 x H217mm/W 6.69x D 13.94x H 8.54 in Net weight : 3.8KGS/8.38lb.
• Motherboard : ITX Power supply :Only SFX < =150 mm CPU Cooler : < H 70 mm GPU : < = L 180 mm Single Low Profile.

Silverstone Tek Plastic/SECC Mini-ITX Computer Case with 2x USB 3.0 Front Ports SFF Cases Black SG05BB-LITE

• Unprecedented 120mm fan in mini casing for positive pressure cooling.
• Mini-DTX/Mini-ITX motherboard & SFX PSU compatible.
• Standard-length expansion cards support (10 inches).
• Elevated standoff for motherboard back side components.

Goodisory M06 SPCC 0.6mm Mini ITX Black Desktop Computer Chassis 2.5 Drive Bay with VESA Rack

• Motherboard: only compatible with mini-itx (6.7" x 6.7").

KCMconmey 4 Bay DIY NAS Case, 4 x 2.5/3.5 Tray. Compatible ITX MB Flex PSU. with Front USB 3.0 12cm Chassis Fan Hot Swap Backplane. Network Attached Storage Enclosure.

• [Support Mini ITX Motherboard] ITX Motherboard dimension 6.7*6.7in (17*17cm)..
• [Support Flex Power Supply Unit] Flex PSU dimension 3.21*1.59*5.91in (81.5*40.5*150mm)..
• [Support 1 Single Slot Full Height PCI-e Expansion Card] To add video card or network card or more..
• [Come With 1 Front USB 3.0 or 2.0 Port] 2 in 1 cable only plug one connector to motherboard..
• [Come With 1 12cm Replaceable Fan] Pre-installed 120*120*25mm chassis fan..