ReviewsMining Engineering

uxcell Extended Compressed Spring Wire Diameter 0.047', OD 0.39', Free Length 1.97' Stainless Steel Small Dual Hook Tension Spring 5pcs

  • Made of stainless steel material not easy to rust, more durable..
  • Tension spring can be used in many occasions, such as production and assembly, experiment, research and development, maintenance, etc...
  • Spring in the global market occupies an important position, are widely used, marine, computer, electronics, automotive, , , chemical, aerospace, railway, nuclear power, wind power, thermal power, engineering machinery, mining machinery, construction machinery, elevators, and other fields.
  • Package Content: 5pcs x Compressed Spring, Finished: Polished,Type：Dual hook.
Check Stock

Happybuy Steel Magnetic Lifter 880 LB Metal Lifting Magnet 400 KG Neodymium Magnetic Lift Hoist Shop Crane 400KG

  • 880 lbs Lifting Capacity: This lifting magnet can lift 880 lbs loads up. It is secure enough to absorb kinds of steel plate. Item Dimension:....
  • Rugged Magnetic Construction: The steel magnetic lifter is made with N42 magnet. Highly efficient painting finish is smooth and bright and not easy to....
  • Security Mechanism: Constructed of a rubber-wrapped handle, a high-strength shackle hook, and several fixing bolts, The lifting magnet greatly....
  • Flexible Usage: The design of the lever rotating shaft is more convenient to control the magnet lifter. Just turn left to open the suction and right....
  • Various Application Area: An excellent sheet metal lifting tool for electricity, engineering, transportation, and mining world. Compatible for lifting....
Check Stock

3 Pcs Brass Drift Punch Set 3/4 1/2 3/8 Inch 25075 25076 25077 Brass Punch Kit

  • 3 Pieces brass drift punch set: you will get 3 brass punches in 3 sizes, including 1 piece of 3/4 inch 25075 brass punch, 1 piece of 1/2 inch 25076 brass punch and 1 piece of 3/8 inch 25077 brass punch.
  • Quality Material: made of sturdy brass for good durability and machinability, the well polished surface is rust and corrosion resistant.
  • Excellent Grip: the brass drift punch with knurled feature providing with an excellent grip and an effective use, offering you convenience for engineering or construction.
  • Nice Performance: the brass punch set is applied to transfer the force of the hammer to a specific location so that to remove or loosen parts or pins.
  • No sparking, no marring to the hard steel, more reliable.
  • Use Widely: the brass drift punch is suitable for manufacturing, auto repair, woodworking, mining industries and more.
Check Stock

Blue Orchards Mining Fun Deluxe Party Packs for 16 Guests! Mining Birthday Party Decorations Gamer Birthday Decorations for Boys Construction Theme Birthday Party Pixel Gaming Party Decorations

  • [EVERYTHING YOU NEED] Our exciting Mining Fun Deluxe Party Pack has all the party basics you’ll need to complement your little one's pixel mining....
  • [FOR 16 GUESTS]This Mining Fun Deluxe Party Pack includes 16 9-inch paper dinner plates, 16 7-inch paper dessert plates, 20 paper lunch napkins, 16....
  • [PARENTS LOVE] Parents will love having everything for their little one’s mining celebration all together in one easy mining package! Craft your way....
  • [MAKE MEMORIES] Grab your Mining party favors and make lasting memories and breathe easy with this adorable, all-inclusive party pack picked....
  • [HAVE FUN] Bring your pickaxes and let your guests enjoy these Mining inspired party decorations when you decorate your big day with our amazing....
Check Stock

SUOHUI Complete GPU Mining Rig for Ethereum Classic ETC/ETH/RVN/Flux/Rego with 8 GPU Mining Motherboard,PSU,RAM, SSD, Open Frame Mining Machanie(ExcludingGPU/1 Layer Miner)

  • 【Preinstalled Mining hardware】Miner comes with a mining motherboard, PSU, cooling fans, 128GB SSD, 8GB RAM, CPU, and Win10 OS(not activated). Our mining rig has a complete installation that all components have passed the inspection of technicians and assembled before sending out, which can reduce the defective rate of electronic components and improve the product quality. Easy start in minutes! Note: NOT include GPUs..
  • 【Professional Mining Power Supply】 1800W full voltage power supply allows to mine at home easily. The 10 customized long-line power cables directly power mobo and each graphics card without an adapter cable, avoiding burning the card due to poor contact, providing the best security for your mining..
  • 【4*4500 RPM Silent Cooling Fans】The mining machine has 4 powerful GPU cooling fans with a fan speed controller. Controllable win speed allows accelerating airflow flexibility for optimal cooling. Equipped with the bottom plate to prevent turbulent airflow and achieve excellent efficient heat dissipation..
  • 【Stackable Open-air Mining Frame】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being over shaped. The open-air frame ensures that the graphics card is not limited i....
Check Stock

8 GPU Mining Rig Frame Case - Complete Mining Rig System for Cryptocurrency Ethereum Miner with 1800W/2800W Power Supply(176V-260V), Motherboard, CPU, RAM, SSD, 8 Adjustable Speed Fans (Without GPU)

  • 【Built in 1800W Power Supply】The mining machine system comes with 1800W (176V-260V) professional Low Decibel mining machine power supply (It will not work under 110V household voltage), the decibel is about 50dB, suitable for home use. Up to 90% power conversion efficiency, allowing you to enjoy mining and save your power consumption at the same time..
  • 【8 GPU slots】8 GPU slots in the mining rig frame case, and the 65mm gap between GPU ports makes it quieter and easier to cool. The mining case support 8 PCS 3060TI/3070/6800/6800XT 6900/6900XT GPU simultaneously. But It is recommended to run only 4 PCS 3080,3090. Note: GPU longer than 32 cm in length are unavailable..
  • 【8 Adjustable Speed Fans】The mining computer case is equipped with 8 PCS cooling fans.The design of one air volume in and one out, the air volume is sufficient and silent enjoyment, escort your graphics card. Fan controller can control the fan speed from 2500 to 4500 rpm, rotate the fan controller to the right to increase the speed..
  • 【Mining rig Including】Our 8 GPU mining rig frame includes 1800W Mining power supply, motherboard, Intel CPU, 128GB SSD, 4G RAM, 2500-4500 rpm cooling fan * 8, screws package. Note: The hard disk is not equipped with a system. After you log in to ....
Check Stock

SUOHUI Ethereum Mining Rig Complete Mining Case for ETH/ETC Crypto Mining Prebuilt 8 GPU Mining Motherboard 1800W PSU 110v-220v 8 Cooling Fans 8GB RAM SSD CPU Excluding GPUs -Blue

  • ◀ Complete Installation, Start in Minutes： This GPU miner has installed high-quality mining hardware (without GPU) and Win10 English version....
  • ◀ Ultra-quiet Mining Power Supply: Built-in 4U 1800W full-voltage power supply, 110V-220V universal output to meet the use of different voltage....
  • ◀ 8 Controllable Cooling Fans: With each 4 cooling fans installed on the front and rear, the mining case fully allows the cold air in and hot air....
  • ◀ High-quality Mining Sever Case: The mining rig adapted sturdy and durable steel material to protect the GPU and electronic accessories. High....
  • ◀ SUOHUI complete mining rig case comes with an 8GPU mining motherboard, 1800W PSU, 8GB RAM, 128GB SSD, CPU (with the cooling system), 4USB ports,....
Check Stock

SUOHUI GPU Mining Rig Case for ETC AE Beam CFX ERG RVN SERO GRIN Crypto Miner Complete Mining System with 8 GPU Mining Motherboard PSU Cooling Fans RAM SSD CPU Excluding GPUs -Black

  • ◀ Complete Installation, Start in Minutes： This GPU miner has installed high-quality mining hardware (without GPU) and Win10 English version....
  • ◀ Ultra-quiet Mining Power Supply: Built-in 4U 1800W full-voltage power supply, 110V-220V universal output to meet the use of different voltage....
  • ◀ 8 Controllable Cooling Fans: With each 4 cooling fans installed on the front and rear, the mining case fully allows the cold air in and hot air....
  • ◀ High-quality Mining Sever Case: The mining rig adapted sturdy and durable steel material to protect the GPU and electronic accessories. High....
  • ◀ SUOHUI GPU mining rig case complete system supports mining cryptocurrency like Ethereum Classic ETC/ETH/Flux/Render Network/Akash Network/XRP and....
Check Stock

LEGO Superheroes 76020 Knowhere Escape Mission Building Set

  • Includes 3 minifigures with assorted weapons: Rocket Raccoon, the Sakaaran and Nebula, plus a figure: Groot. Also includes an orb.
  • Mining station features a tower with trap door and an exploding function, firing bazooka, catapult with fuel bombs,docking station for the mining pod.
  • Mining pod features a cockpit, grabbing claws and deployable fuel bombs. Weapons include Rocket Raccoon's space blaster, a space blaster and a sword.
  • Nebula minifigure and the Groot figure are exclusive to this set! Groot figure is fully posable with adjustable arms and legs.
  • Mining station measures over 6" high, 8" wide and 5" deep. Mining pod measures over 2" high, 2" wide and 3" deep. Groot stands over 5" tall.
Check Stock

DUOYI Ground Digital Insulation Resistance Meters, 0-2000 Ohm DCV ACV Meter Megohmmeter Megohm

  • The ground resistance tester is a commonly used instrument for testing and measuring ground resistance. It is also a common tool for electrical safety inspection and grounding engineering completion acceptance. This product is suitable for grounding resistance measured by electric power, post and telecommunications, railway, petroleum, chemical, communication, mining as well as measuring low resistance conductor resistance..
  • High precision: Three-wire resistance compensation test method can eliminate the influence of lead resistance. Fast response: Display measurement data in approximately 5 seconds..
  • Withstand voltage protection: Grounding voltage file, can withstand 300VAC (1 minute), grounding resistance file, can withstand 200VAC (10 seconds)..
  • Three-speed measurement: 0-20 ohms (resolution 0.01 ohms), 0-200 ohms (resolution 0.1 ohms), 0-2000 ohms (resolution 1 ohm).
  • Indicator light guide:Power and Wiring indicator to guide the user to use correctly, power light: power indicator. Green light:Checking the test line correct or not, the 6th 5th battery installed correctly or not..
Check Stock

Fanhasi 8 GPU Mining Rig Frame Case for ETH Crypto Miner with 8 GPU Mining Motherboard & 2000W Power Supply & 128GB SSD & 4G RAM & 8 Cooling Fans (Without GPU)

  • 8 GPU Slots Mining Rig System: Designed for Ethereum miner, you can put at most 8 Pcs GPU cards in the mining case. 65mm gap between each GPU ports gives the video cards enough space for air circulation for cooling. It's fit for most GPU card except 3060. NOTE: GPU cards are NOT Included.
  • 110V - 264V Input Power Supply: Built in 2000W PSU is designed for mining rig with up to 90% conversion efficiency. 110V - 264V universal AC input design allows you to enjoy mining at home easily. Without any modifying, it can work at a household voltage of 110V..
  • 8 Pcs Powerful Cooling Fans: This ETH mining rig case comes with 8 PCS adjustable cooling fans which help to accelerate air convection and keep the GPU card working at high performance. With the help of controller, you can control the fan speed to reduce the noise..
  • Case Type Mining Machine: The Ethereum miner case is made of high quality steel material which is sturdy and durable, can fully protect your GPU and electronic devices from damage. NOTE: GPU cards which are longer than 12.6 inch / 32cm in length are UNAVAILABLE for this mining rig..
  • Mining Rig Including: B75 motherboard, 2000W Supply Power (110V - 264V input ), CPU, 128GB mSATA SSD, 4G DDR3, 8 PCS 4500 RPM cooling fans. (NOTE: GPU cards are NOT Inc....
Check Stock