ReviewsMining Pc Case

ATX 1600W Full Modular Mining Power Supply GPU for Bitcoin Miner ETH Rig Supports 6 Graphics 80+ Gold Certified with 150CM US Plug Adapter Cable(110V)

This power supply is special for mining machine, in order to effectively dissipate heat, the fan speed is above 6000 RPM, so the noise is normal, if forced to choose to use in PC,there is no way to avoid this noise, PC power fan used within 2000 RPM..
This is a power supply specially designed for the US 110V.The modular mining power supply can be a perfect tool for your Eth Coin rig.Rated power is 1600w. DC circuit design, stable voltage output..
80 PLUS Gold Certified PSU 150mm cooling Fan and Auto Fan Speed Control.150mm large fan design for optimal system cooling and maximizing performance.Compatible with quality, efficiency and stability balance, pursuing continuous real power output..
1x IDE.It's better for Bitcoin GPU mining,100% Brand New and High quality - GPU:Support Up to 6 GPU(GPU is not included).
Using a new large-capacity large magnetic ring material, the performance is very stable. Widely used in variety of mines and high-power single 12V industrial equipment..

Check Stock

8 GPU Mining Rig Frame 68mm Slots with 8 Fans, Cryptocurrency Mining Machine with Barebone Motherboard for ETH/ Ethereum, Miner Case with RAM, SSD

【Complete Mining Rig】 The miner is almost completed, The extras you need are a power supply, GPU, HDMI cable. It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..
【With 8 GPUs Motherboard】 The mining motherboard with 8 spaced expansion slots, 68 mm between each slot, allow you run 8 GPUs simultaneously. Compatible with 1660, 2070, 3080, 3090, RX580 and other series of graphics cards, But 3060 is not supported. The hash rate will be halved or even less. Note: GPUs longer than 35 cm in length are unavailable..
【8 Fans Support & Fan Controller 】 The cryptocurrency mining rig is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
【Mining Technical Support】 Support OS/Windows, but for most graphics cards, the OS system will be relatively stable. Note: There is no system installed in the hard disk, you need to download it yourself. The mining machine is an item that requires technology. If you encounter technical trouble, please....

Check Stock

80mm Slim Quiet Computer Fan 12V 80mm x80mm x15mm Silent PC Fan 4Pin PWM for Computer PC Case Mini- ITX Builds EVGA GPU CPU Cooler Radiator Cooling Fan 800-2200RPM 3-Pack

❤80MM SLIM DESIGN: 12v dc 80mm slim pc computer fans designed for narrow space diy project cooling system and small ITX pc case or water-cooling radiator fan replacement..
❤FAN SPECIFICATION: 80mm small 12v dc cooling fan 3.15inch x 3.15inch x 0.59inch with 12v dc 0.15a 1.8w at speed 800-2200rpm airflow: 22.8cfm noise level :26.8dBA(max) cable length:40cm 15.75inch..
❤4PIN PWM FAN:80mm 4Pin PWM case fan to be fit for 4pin CPU PWM fan port or water-cooling radiator. motherboard will adjust the fan speed from 800RPM-2200RPM according to inner working temperature automatically..
❤WIDE APPLICATION: 12v 80mm 8015 slim cooling fan with 4pin 4 wire pwm function for diy moderm cabinet projects cooling system , as replacement fan for electronics device equipment & water-cooling radiator ,build small mini-itx atx case cooling and diy gpu cooler fan of mining rig frame..
❤HYDRAULIC BEARING: Hydraulic bearing up to.

Check Stock

MLLIQUEA 8 GPU Mining Rig Frame, 70mm Mining Machine System & Platform, Barebone Motherboard for ETH with 4 Cooling Fans, Miner Frame Case with SSD, RAM (Without PSU/GPU)

8 GPU Ports - The mining machine system comes with 8 GPU interfaces, and the GPU interface spacing is about 70mm. 8 GPUs can be installed on the motherboard at the same time. The actual work done for you is lasting and rewarding. (Please read the NOTE in the Product Description carefully before purchasing!)Two kinds of motherboards are shipped randomly..
Upgrade Material - Our mining GPU frame case is made of high-quality steel, which is sturdy and durable, and can be reused. Can fully protect your GPU and electronic equipment from damage and saves your use cost. Excellent equipment design to improve GPU performance. It is recommended that you buy MLLIQUEA 2000W power supply, which is sold in our store. Suitable for this case, more efficient mining..
Eth Mining Rig - Including: motherboard, Intel CPU (with CPU radiating plate*1), 128GB SSD, 4G RAM, 4500 rpm cooling fan * 4 , 6 PIN cable to (6 + 2) Pin * 8pcs, screws package. Compatible with Win10 /iOS, but you'll need to install the system yourself. (Graphics cards longer than 320mm cannot be used.).
Safe and Effective - It can be low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum (ETC), and any other cryptocurrency. Note: The hard disk i....

Check Stock

8 GPU Mining Rig 70mm Slots with 2000W Power Supply, 8 Fans Crypto Coin Miner Frame with Barebone Motherboard for Ethereum, Cryptocurrency Mining Case with SSD/RAM (Without GPU)

...Can not be used at household voltage of 110V） The number of revolutions is as high as 7000 rpm per minute so the heat dissipation effect is good. The power efficiency is about 90%. Please reserve about 300W for the motherboard, fan, and other wire consumption..
【8 GPUs Support】8 GPU 75mm expansion slots in the mining computer case. For our power supply, the power efficiency is 90%, the rated power is 2000W, and the output power=2000*90%. So we recommend to run 8 PCS 3070/6800/6800XT 6900/6900XT GPUs simultaneously, run max 5 PCS 3090, run max 6PCS 3080 without overclocking. Note: GPUs longer than 32 cm in length are unavailable. We don’t recommended to mix various types of GPUs..
【8 Fans Support & Fan Controller 】The cryptocurrency mining rig case is equipped with 8 PCS cooling fans. 4 fans pull the air in and other 4 fans in the opposite direction pull the air out to keep GPU/motherboard/PSU cool. Fan controller can control the fan speed from 2500 to 4500 rpm..
【 5 USB Ports 】 It is designed for cryptocurrency mining—Litecoin, Dogecoin, Ethereum, Ripple, Zerocoin etc. The miner case has 5 USB ports. Please ensure that all connection interfaces are in good contact to prevent the motherboard/GPU from overheating..

Check Stock

BIHAIT 4K HDMI Dummy Plug,High Resolution Virtual Monitor Headless Ghost Display Emulator,3840x2160@60Hz Adapter for Ethereum BTC Mining, Compatible with Windows Mac OSX - 6 PC（Blue）

...OHO servers and remote-deployed headless PCs.
【High performance】 - 4K High Resolution Hdmi Display Emulator - Headless Ghost with 3840×[email protected] & [email protected] high resolution makes GPU speeded-up remote desktop and GPGPU operations like ryptocurrency mining, rendering and simulations..
【Unlock the Potential】 - HDMI dummy dongle ensures stable digital signal and unlocks the full potential of graphics card, avoid distorted image.Works great with virtual desktop on Oculus Rift & HTC Vive. (Hdmi 4K,VGA,DVI,DP,Mini DP, HDMI).
【Efficient】 - Fit headless HDMI display emulator simplifies streaming games and multimedia from a headless gaming PC to the living room with high refresh rate and HDMI audio. Saves the need to connect a display to a PC when used with a VR headset. It also enables your mining rig boots normally..
【Supports All Systems】 -Works with Windows, Mac Mini OSX Linux, PC and any HDMI enabled computer. It will work with any graphics card without incompatibility issues. Virtual display adapter fits into the HDMI output, they act exactly t....

Check Stock

Mining Case 8 GPU Stackable Preassemble Rig Aluminum Open Air Frame for Ethereum ETH /ETC/ZCash/Monero/BTC Easy Mounting Edition

Durable Material: The mining case is made of aluminum alloy. Standard aluminum profiles, durable, fully protected graphics, and electronic devices,....
Excellent Heat Dissipation Performance: Widebody cooling design greatly increases the distance between the graphics card to ensure a good cooling....
Flexible Construction: Stackable open-air design for any type of GPU scrypt mining tools, such as Litecoin, Dogleg, Earthcoin, and bitcoin ASICs..
Easy to Install: The assembled bottom, right and left side of the case makes the installation easy..
Package Included: 1set Open Air Frame (ONLY FRAME). DOES NOT include CPU, GPU, PSU, Fans, Motherboards, RAMs, or any cables..

Check Stock

MLLIQUEA 8 GPU Ports Mining Rig, Crypto Complete Mining Frame Machine with 2500W Mining Power Supply, Barebone B75 Motherboard for ETH with 8 Cooling Fans, Miner Frame Case with PSU, RAM, SSD

8 GPU Ports - The mining rig come with 8 GPU interfaces, the GPU interface spacing is 65mm. 8 GPUs can be installed on the motherboard at the same time. Compatible with AMD/NVIDIA GPUs..
2500W PSU - Our EHT miner is equipped with a 2500W professional Low Decibel mining power supply (176V to 264V), with ultra-high work efficiency, and is equipped with multiple power protections..
Complete Mining Rig- Include 2500W PSU, B75 MB, CPU G2030, 128G SSD, 4G RAM, eight 4500 rpm fans, 8 pin cables, and screws. Compatible with Windows or OS, but need to install the system yourself..
Upgrade Material - MLLIQUEA mining GPU frame case is made of high-quality steel, which is sturdy and durable. Can fully protect your GPU and electronic equipment from damage and saves your use cost..
Effective Heat Dissipation - Upgraded version of the 8 fans with adjustable speed (2500rpm-4500rpm). If you feel that the fan is very noisy at work, you can adjust the fan speed regulator to reduce the rotation speed and reduce the noise. Low power consumption, reduce heat generation, energy-saving, and safe use. This is a must for mining Ethereum, and any other cryptocurrency..
Excellent Customer Service - Please read the manual before use. If you are not completely satisfied with your purc....

Check Stock

WOOCHOO Mining Rig Frame - 6/8 GPU Steel Open Air Miner Computer Case for Crypto Coin Currency Bit ETH ETC ZEC Accessories Tools，（Fans & is not Included） black 53.4 x 29 4.4 cm

【Slot】6/8 GPU slots. (GPU is not included). The length of the graphics card is unlimited..
【High Quality Material】- The frame was made of high quality material, with the finest craftmanship. Strong & durable, fully protection to your....
【Perfect Design】Perfectly fit ATX motherboards, up to 8 graphics cards, hard drives, and power supplies. Professional design for mining rig frame,....
【Easy to install】- The Open Air Miner Mining Frame Rig Case has precise screw holes and easy installation. You can quickly complete the layout of....
【Notice】This mining rig frame is the Frame Only, not includes Fans or other CPU, GPU, PSU, Motherboards, Cables. If you are not 100% satistifed....

Check Stock

Mining Rig Frame - 12 GPU Steel Open Air Miner Mining Computer Frame Rig Case for Crypto Coin Currency Bit Coin ETH ETC ZEC Mining Accessories Tools - Frame Only Fans & GPU is not Included

▶▶▶【Slot】12 GPU slots. (GPU is not included). 12 card spacing is 61MM. The length of the graphics card is unlimited..
▶▶▶【Easy to install】Easy to install and strong structure. Keep all cables clean and organized, along with everything in your mining machine..
▶▶▶【High Quality Material】The open air mining frame case made up of the highest quality stainless steel material, strong, durable and....
▶▶▶【Perfect Design】Professional design for mining rig frame, accelerating the air convection, super cooling design for heat dissipation.....
▶▶▶【Note】The Frame Only, Not includes Fans or other CPU, GPU, PSU, Motherboards, Cables. If you are not 100% satistifed with this Miner,....

Check Stock

SUOHUI GPU Mining Rig Complete System for Ethereum Classic ETC, ETH, RVN, Flux, Ergo Crypto Miner with 8 GPU Mining Motherboard,PSU, RAM,SSD, Stackable Mining Frame Machine(Without GPUs)

【Stackable Frame Mining Machine】: This mining frame is made of high-quality material, reinforcing the mobo with14 screws to protect it from being overshaped. The open-air frame ensures that the graphics card is not limited in length. You can easily stack multiple SUOHUI mining rigs at will without covering too much space..
【8 GPU Mining Motherboard】: Our mining rig has installed a 8 GPU slots mining motherboard with SSD,RAM,CPU. 65mm spacing provides enough space between GPUs, suitable for AMD/NVIDIA GPUs. Note: The width of GPUs should not exceed 65mm..
【1800W Stable Mining Power Supply】:This mining power supply uses 4U PSU rated output 1800W 12V full-voltage, can work under (110-220v）.10 long-line cables with 16x8 (6+2) pins and 6x6 pins, which can powers the mobo and GPU directly. Effectively improve conversion efficiency and reduce power loss..
【4*4500rpm Silent Cooling Fans】4*4500rpm GPU cooling fans, professional silent design with adjustable fan speed controller, fully accelerating airflow to achieve the ultimate cooling effect. Let you easily enjoy the fun of mining at home..

Check Stock