ReviewsMiniwatt Power Amplifier

PRORECK PR-122M Complete 1500W Dual 12

  • Package Includes: (1) PRORECK PR-1500.1M 1500W Amplifier, (1) dual 12" Car Subwoofer, (1) Complete Amp Installation Wire Kit..
  • PRORECK PR-1500.1M Dual 12 Car Subwoofer enclosure system with matching mono block amplifier. 1500 watts peak power/ 400 watts RMS. The surface is high quality aviation grade tweed carpet and has embroidery. The angle is 15%, close to the perfect vehicle bass alignment. Frequency Response: 15Hz - 20kHz. Power Output: 200 Watts RMS Mono-block at 4 Ohms and 1% THD+N. 4-Ohm Mono-Block Class A/B. Dynamic Power: 400 Watts @ 2 Ohms..
  • This system includes a top-level Enclosure with more powerful and rich bass. It also includes a mono block bass amplifier. This mono amplifier is built just for loud bass.It feature high power 1.5" aluminum 4-layer voice coils with bumped and vented magnet motor structures among other features. It has efficient bass response with deep and clean sound..
  • Amplifier with full range RCA output, RCA line input, high level input, bass EQ, dashboard remote, etc, meet all your needs.And amplifier contains mute circuit, bass optimization circuit, protection circuit, thermal protection, speaker short circuit protection, input overload protection and DC offset protection,make users have a better experience. Rich wire....
Check Stock

Rockville SK510 PACKAGE 10 1200w Loaded K5 Car Subwoofer Enclosure+DB11 Amp

  • Loaded Sub Enclosure Features: Rockville Single 10" K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts.
  • Vent dimensions (inches): 2" x 6.5" x 8", Tuning frequency of enclosure: 35 Hz, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire.
  • Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote, CEA Compliant Power Ratings.
  • Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song) - 2 Ohm: 1400 Watts x 1 Channel, - 4 Ohm: 880 Watts x 1 Channel, High-Speed MOSFET Power Supply.
  • Features of wire kit:, Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 8 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable.
Check Stock

AIYIMA T10 Tube Preamplifier with Bluetooth and AIYIMA A07 TPA3255 Power Amplifier 300w+300W Class D Amp Bundle

  • The Aiyima T10 is a Vacuum Digital tube preamp for your home stereo system, The effect of the T10 vacuum tube preamp is warm and soft sound quality. Can match with our A07 Power Amplifier, it not only makes the sound sound soft and sweet, but also experiences the Hifi effect of the class D amplifier.
  • The T10 Tube preamp output to the powered speaker, A07 amplifier & passive speaker.
  • A07 Power Amplifier is a 2 Channel Power Amplifier,with 3.5mm AUX output to next active device can made a 2.1 channel audio system,the Max Power Output 300W+300W(Need choose big power adapter),Use TPA3255 Amp Chip.
  • More technical support and help,pls ask me:www.amazon.com/hz/help/contact/A3BG62S1F23IH5#.
Check Stock

[Upgraded]AIYIMA A07 Pro TPA3255 Power Amplifier Bluetooth 5.2 300Wx2 HiFi Class D Amp 2.0/2.1 Channel Stereo Digital Audio Amplifier with Bass Treble Control& Line Output + Power Adapter

  • ❶ 【TPA3255 Power Amplifier Chips】Adopt the Instruments TPA3255D2 high performance and low distortion class-D power amplifier chip, NE5532 dual op-amp. Very Quiet, Runs Extremely Cool,Easy to set up.
  • ❷ 【High Power Output under big Power adapter】Max power output 300W+300W under 4ohm load HiFi integrated class D amplifier, Exclusively designed for the customers who pursue HiFi sound,Upgraded your power adapter,the High efficient power output up to 300 Watt(For passive speakers only, not the Powered speakers).
  • ❸ 【Bluetooth&AUX audio inputs can be selectable】This Mini Passive Speaker Amp with bass treble volume control,add 3.5mm aux line output can go to connect any Powered device to Active Speakers,Amplifier,Active Subwoofer ect. Create a 2.1 channel audio system(The line ouput port doesn't used as headphone amplifier).
  • ❹ 【Outstanding internal construction】The A07 Pro tpa3255 home stereo amplifier use American Qualcomm Bluetooth 5.2 chips,Stable and efficient,Simple compact design,And the exterior design is delicate and beautiful little amp,It can match with your computer/ desktop /Home theatre ....
Check Stock

New SKAR Audio RP-2000.1D 2800 WATT MAX Power Class D MONOBLOCK SUB Amplifier

  • The RP-2000.1D is one of the most popular amplifiers ever released from Skar Audio and for good reason. Designed for maximum power, efficiency, and affordability, every feature of this amplifier exemplifies its high quality engineering. This amp is rated at a conservative 2,000 watts RMS power at a 1 ohm operating load, and is capable of putting out over 2,800 watts max power at 1 ohm..
  • Featuring a high speed MOSFET power supply, 4-way protection circuitry, advanced PCB board design, and other internal high quality components, the RP-2000.1D outperforms anything else in its class when it comes to power and reliability. This amplifier comes with a bass knob & remote wire allowing the user full control over their bass from the front of the vehicle. This makes for a great amplifier when looking for serious power to get your system loud, and will work great on a single subwoofer a.
  • Skar Audio RP-2000.1D Monoblock Car Subwoofer Amplifier 1 Ohm Stable Class D Monoblock Subwoofer Amplifier 4 Way Protection Circuitry: Thermal, Voltage, Speaker, DC RMS Power @ 4 Ohms: 800 Watts x 1 Channel (14.4v) RMS Power @ 2 Ohms: 1,400 Watts x 1 Channel (14.4v).
  • RMS Power @ 1 Ohm : 2,000 Watts x 1 Channel (14.4v) Max Power @ 1 Ohm: 2,800 Watts x 1 Channel (14.4v) MOSFET Powe....
Check Stock

MUZISHARE X7 KT88 x4 Vacuum Tube Integrated Amplifier Push-Pull Power Amp MM Phono Tube Amplifier Balanced XLR 2022 Remote

  • MUZISHARE X7 Upgraded version. Upgraded the internal coupling capacitor, is the designer to debug the custom-made silver film capacitor, relative to the classic version of the extension, control, density is better..
  • MUZISHARE X7 is an integrated Amplifier. This is also a Power Amplifier (there is a group pre-amp input), a Headphone amplifier and this is a amplifier for Phono player too, direct link your phono player to this amplifier to output to speakers..
  • Pure Handmade,point to point hand welding using two high-quality wide-frequency high-quality Japanese EI output transformer using a high-power Z11 core toroidal power transformer dedicated designed for the machine ， voltage amplification and promote are used tube 5AR4 for rectifier power supply..
  • Use 12AX7 and 12AU7 vacuum tube for voltage amplification and phase inversion,use KT88 vacuum tube to do AB1 push-pull power amplification.
  • Mute delay function when turn on the amp(about 30 seconds) ；the choice of Japanese ALPS motor potentiometer.
  • Provide Triode and Ultralinear selection function: Triode work mode. soft. pure and sleek. suitable for enjoying vocals. strings Music and other types of music.
  • Ultralinear work. the sound of open. unrestrained. the momentum is good. for large scenes. large dyn....
Check Stock

Pyramid PB715X 1000 Watt MOSFET 2-Channel Car Audio Power Amplifier System with Soundstorm 8 Gauge Complete Car Audio RCA Wiring Installation Kit

  • PACKAGE INCLUDES: 1 Pyramid PB715X 1000 watt MOSFET 2-channel car audio power amplifier system and 1 Soundstorm 8 gauge complete car audio RCA wiring installation kit.
  • AMPLIFIER: The amplifier features a MAX power handling of 1000 watts and a RMS power handling of 500 watts at 4 Ohms. The MOSFET modulated power supply has a higher switching speed and includes a built in variable subwoofer crossover and variable gain control.
  • WIRING KIT: The amplifier installation wiring kit features a 20 foot 8 gauge red power cable, competition high quality fuse holder, 3 feet of 8 gauge black ground cable, 16 feet of 18 gauge blue turn on wire, a 20 foot high performance RCA interconnect.
  • DIMENSIONS: Dimensions: 7.28’ L x 9.45’ W x 2.09’ H.
  • WARRANTY: The amplifier and the wiring kit both include a 1 year manufacturer warranty.
Check Stock

Massive Audio E4 - Car Audio 4,000 Watt Nano Edge Series, Monoblock Car Amplifier, Bass Boost, 1 Ohm Stable

  • HIGH PERFORMANCE CAR AUDIO AMPLIFIER | The best competition amplifiers for cars in the market! This 12v car amplifier features: 2000 Watts x 1 RMS @ 1 Ohm / 4000 Watts MAX, Freq: 10Hz - 220Hz, 0~12dB, Built-In OEM Line Converter, High Power in Extremely Small Heat Sink, Bass Boost 0~12dB, and Ground Loop Isolator. Our monoblock amplifier for car provides real punch for your car stereos and car subwoofers!.
  • PRODUCES POWERFUL, CLEAN, FULL SOUND | Don't settle for weak sounding and underpowered car subwoofer amplifier. Your car amplifier package and car subwoofer set aren't complete without our monoblock Massive amplifier. Our car audio subwoofer amplifier features: Built-in OEM line converters with RCA inputs that can take a high level speaker signal at up to 10 Volts directly in. DC 5V - 15V Operating Voltage..
  • QUALITY TESTED AND GUARANTEED TO ALWAYS REACH ITS FULL POWER | Hits its full power all the time! That is our guarantee! You don't need to set the gain to low to avoid distortion. It works great and provides high power with low efficiency. Also, by sensing the DC offset of a factory radio it can activate the ATO (Auto Turn On) feature and Next Generation Advanced 5 Way Protection Circuitry..
  • GREAT QUALITY PRODUCT THAT WILL LAST LONGER | Don't settl....
Check Stock

Orion Cobalt Monoblock Amplifier – Class D Amplifier 1500W RMS 3000W Max Car Electronics Car Audio Stereo Subwoofer 1 Ohm Stable Bass Boost MOSFET Full Range Amplifier for Car Speakers Sub Amp

  • QUALITY - This Class D Monoblock Amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place.....
  • 1 Ohm Stable - This cobalt subwoofer amplifier for car speakers is able to power loads of 1 Ohm on a continuous basis without facing any difficulties....
  • Low/High Level Inputs – The monoblock subwoofer amplifier for car stereo speakers with mosfet power supply comes with low/high level inputs. A low....
  • Features – The monoblock bass boost amplifier has features like - Frequency Response: 10~250HZ, Low Pass Filter, Bass Boost, Subsonic Control,....
  • Power – This Class D 3000 watt Amplifier has a power rating distribution as followed 3000 X 1 MAX @ 1 OHM. The monoblock amplifier for car speakers....
Check Stock

The Night Orion Fell A Survival Story

  • Features – The 2 channel bass boost amplifier has features like - Frequency Response: 10HZ-30KHZ, Bass Boost, Remote Bass Knob, Gain Control, 2-way....
  • Class A/B – This Orion Cobalt multichannel subwoofer amplifier exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier....
  • Quality - This Class A/B 2 channel amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent....
  • Power – This Class A/B 1500 Watt Amplifier has a power rating distribution as followed 2250 X 2 MAX @ 2 OHMS, 1125 X 2 MAX @ 4 OHMS. The dual....
  • Low/High Level Inputs – The multichannel subwoofer amplifier for car stereo speakers come with low/high level inputs. A low level (RCA) input is....
Check Stock

AmpPro Ultra Low Noise TV Antenna and Distribution Amplifier,G25F101U

  • Ultra Low Noise Amplifier Boost enhances any non-amplified antenna, delivering more range and channels. The Boost Digital TV Antenna Amplifier is the most advanced digital TV antenna amplifier available featuring very low noise figure. Using the latest advances in amplifier technology, Boost enhances any non-amplified antenna, delivering more range and available channels. Give your antenna a Boost today and get more channels and a better picture from over-the-air HD television broadcasts..
  • Works with Any Non-Amplified/Passive TV Antenna The Boost amplifier helps pick up channels that your non-amplified antenna alone may not be able to pick up. Additionally, the amplifier minimizes pixelization and drop-outs, using Clear Circuit Technology. The Boost amplifier works with any passive/non-amplified antenna. It works with VHF, UHF and Cable signals–typical gain is 25 dB for VHF, UHF and Cable..
  • Distribution Amplifier – Deliver a Better Signal to Multiple TVs The Boost amplifier can even be used to help distribute a stronger signal to multiple TVs. Connect the coax running from the antenna to the “IN /ANT” port of the amplifier, and connect the cable running from the “OUT/TV” port of the amplifier to a splitter. Then, use the provided USB c....
Check Stock