ReviewsMiter Bar For Table Saw

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a met....
Check Stock

Dual Deluxe Stackable Featherboards with Riser Blocks Aluminum Miter Lock Bar and T Bolt Hardware for Track or Miter Slot Mounting Ideal for Table Saws Router Tables and Band Saws

  • ...rizontal applications. When the featherboards are stacked with the included 2” tall spacers, you’ll have a full 3-7/8” worth of holding pressure height. This means you can hold taller stock for re-sawing projects on table saws and band saws! When using the featherboards separately, one can be installed into a miter slot and the other can be installed into a track on a fence..
  • Many featherboards come with a miter bar locking system that typically do not fit very well. We identified this issue and have redesigned the miter bar making it far more secure and easier to lock into your miter track. The aluminum bar is longer than older designs and is a bit more narrow in the center. This means that when the knob is secured and the bolt is properly seated, the bar spreads out much better than before and creates a nice tight fit into your miter track..
  • This dual featherboard also includes 1½” long ¼” x 20tpi t-bolts. This gives you the option to mount the featherboards into small t-track slots. These t-track slots are most commonly used on router table tops and router table fences. This means you can use the featherboard vertically on a router table fence or horizontally laying flat on a router table or table saw top surface..
Check Stock

Rockler 24 Aluminum Miter Bar - Aluminum Bar for Smooth-Sliding Action on Table Saws Router Tables Workbenches & More – For any Standard 3/4 x 3/8 Miter Slot – Accessories for Table Saw

  • 24" Aluminum Miter Bar: The Rockler miter track bar allows you to set up your jigs for smooth-sliding action on table saws, router tables, bandsaws,....
  • Adjustment Screws: This solid aluminum miter bar has nylon set screws in the miter bar that adjust in or out for a perfect fit in any standard 3/4" x....
  • Great For? Our miter slider bar is great for shop-made crosscut jigs, cutoff tables, taper jigs, and more. Available individually in 18", 24", and 36"....
  • Easy Assemble: Our miter bar slider makes it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues. This....
  • Extremely Durable: Our miter bars for the table saw are made of high-quality aluminum alloy that will be strong and reliable for several years..
Check Stock

Miter Bar Slider Table Saw,Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Woodworking Tool for Building Various Jigs on Sleds Tables General Woodworking(300 mm / 11.81 inch)

  • 【Practical Tool】This is a miter bar usually used in table saw woodworking works, Width: Approx. 19mm / 0.748''.
  • 【Durable Materials】The miter bar is made of high quality aluminium alloy materials, it is of strong strength and long durability, it is of strong strength and reliable durability for several year using without abusing..
  • 【Adjustable Runner】Adjustable stainless steel runner for perfect sliding action..
  • 【Easy to Use】Universal threaded mounting holes for convenient use, adjusts for perfect sliding action in any standard miter gauge slot with just a twist of the wrist. Locks securely in any standard miter gauge slot with another twist of the wrist..
  • 【Wide Application】For building various jigs on your table saw, like miter sleds etc..
Check Stock

VEVOR Precision Miter Gauge 24 Aluminum Table Saw Miter Gauge w/ 60 Degree Angled Ends for Max Stock Support and a Repetitive Cut Flip Stop Miter Saw Fence w/Laser Marking Scale

  • Precise Angle Cutting: This table saw accessory is 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient.....
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance....
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped....
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix....
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for router tables....
Check Stock

4410 4412 4000 3915 5412L 4100DG-09 4405 5412 GTS1031 Carbon Brushes compatible with Bosch Miter Table Saw

  • compatible with: Bosch: 4412 (0601665039) 12" Miter Saw 4412 (0601665039) 12" Miter Saw 4000 (0601476139) Table Saw 4000 (0601476139) Table Saw B3915....
  • compatible with: Bosch: 4212L () 12" Dual-Bevel Upfront Control & Laser Tracking Compound Miter Saw 4212L () 12" Dual-Bevel Upfront Control & Laser....
  • compatible with: Bosch: 4212 (060166F035) Miter Saw 4212 (060166F035) Miter Saw 4410 (060166E139) Miter Saw 4410 (060166E139) Miter Saw 4212L....
  • We have been specializing in the production of carbon brushes for 20 years. Our products are not only supplied to Chinese customers, but also sold to....
Check Stock

DW705 DW708 DW715 DW361 DW359 DW362 DW744 DW744SB Carbon Motor Brushes Compatible with DeWalt Miter Saw Circular Saw Table Saw (2 pcs)

  • Compatible with Dewalt: DW705-220 Type 1/2 12 inch Miter Saw DW705S Type 5/6/7/8 12 inch Compound Miter Saw DW705 Type 1/2/3/4/4A/5/6/7/8 12 Inch Miter Saw DW708 Type 1/3 Crosscut Miter Saw DW744S Type 2/3 Jobsite Table Saw DW744 Type 1/2/3 Jobsite Table Saw DW361 Type 1/2 Circular Saw DW357 Type 1 Circular Saw DW358 Type 1 Circular Saw..
  • Compatible with Dewalt: DW359 Type 1/2/3/4 Circular Saw DW360 Type 1/2 Circular Saw DW362 Type 1/2/4 Circular Saw DW364 Type 1/2/3/4/5 Circular Saw DW384 Type 1/2/3/4/5 Circular Saw DW744SB Type 3 Table Saw DW715 Type 1 Miter Saw DW364K (Type 3) 7-1/4" 184mm Circular Saw Kit..
  • Compatible with Black-Decker: 2694 7-1/4" Industrial Strength Sawcat 3057-48 Type 1 7 1/4 Saw Cat 3057 Type 1 7 1/4 Circular Saw 3060 Type 1 7 1/4 Professional Saw Cat 3064 Type 1 7 1/4 Professional Saw Cat 2683 Type 1 7 1/4 Circular Saw 2684 Type 1 7 1/4 Industrial Saw Cat 2685 Type 1 8 1/4 Industrial Saw Cat 2695 Type 1 8 1/4 Industrial Circular Saw..
  • Compatible with Black-Decker: 2697 Type 1/2 Light Weight Circular Saw 2698 Type 1 Light Weight Circular Saw With Brake 27111 Type 1/2 Circular Saw 3660 Type 2/3 12 Miter Saw 3680 Type 2/3 12 Compound Miter Saw QP350 Type 1 7-1/4 Circular Saw 3057-44 (Type 1) 7 1/4 Sawcat Chili 3064-44 (Type 1) 7 1....
Check Stock

Trend UVJS/TG/JIG Varijig Tenon and Grooving Jig

  • Fits left and right tilting table saws, Fits with 3/8″ x 3/4″ miter gauge slots.
  • Has ergonomic handles, quick release coarse adjustment, micro adjustment to .004-inch.
  • Universal miter bar for use with all table saws with 3/8-inch by 3/4-inch miter slots.
  • Extra-large clamp handwheel, This reasonably priced multi-purpose jig features 90 degree-45 degree Backstop with Adjustable 90 degree Positive Stop for Secure Support of Angular Stock. The work support tilts left up to 15° for angled or compound tenons. An adjustable positive stop and micro-adjust knob allow easy, precise set-up..
  • Compatible with a table saw with 3/8″ x 3/4″ miter slots.
Check Stock

THE SMART CUT Aluminum Table Fence 18 ft with Universal Saw Attachment Mounts | For Any Portable Chop or Miter Saw Stand | Compact & Lightweight | Easy Setup Jobsite Table

  • LESS BOARD STRUGGLE: The Smart Cut Aluminum Table Fence universally attaches to any saw or stand (not included) giving you a flush fit to your saw back fence and base. Table sections can be configured left or right of the saw for cutting work pieces of any size. This table eliminates board struggle at the saw and keeps boards on plane for precise, accurate cutting..
  • COMPACT & LIGHTWEIGHT: The aluminum Table Fence is very lightweight, portable, and jobsite tough. Our miter saw accessories are heavy-duty, yet fast and easy to set up and tear down so you can go home at the end of the day. It’s a great addition to your miter saw stand, the table breaks down into (4) 4.5ft sections, it fits easily into your truck bed. Cost, quality, and versatility make this a superior product to other miter saw tables, miter saw fences, and miter saw accessories competitors..
  • SATISFACTION GUARANTEED: Made in the USA and Veteran Owned, we are confident you will love our miter saw products. We are committed to providing the highest level of customer satisfaction. If you are ever unsatisfied, reach out to us directly, and we will do all we can to make it right. Your satisfaction is our #1 priority..
Check Stock

MICRO JIG ZEROPLAY Miter Bar

  • no slop, side-to-side play or seasonal warping.
  • top-down installation for easy and fast mounting to jigs, fixtures and sleds.
  • zeroplay miter bars will fit any standard (3/4”) t or u-shaped miter slot that measures between 0. 73 and 0. 79" wide and at least 5/16" deep.".
  • includes (1) miter bar. miter stop not included. made in the usa..
Check Stock

NEIKO 10768A 12" Carbide Chop Saw Blade, 2 Pack, 80 Tooth with 1-Inch Arbor, Compatible with Miter, Table, Radial Arm, Cut-Off, Standard Circular Saws, for Home Building, Construction, Woodworking

  • 【IMPROVE EFFICIENCY】 This aluminum alloy miter rod is usually used for table saw woodworking work, effectively improving efficiency..
  • 【ALUMINUM ALLOY MATERIAL】 The miter rod is made of high-quality aluminum alloy material, with high strength and long service life..
  • 【STANDARD SIZE】 The miter rod has a universal threaded mounting hole, which is easy to use and fits in a standard miter groove..
  • 【STAINLESS STEEL PULLEY】 Our oblique street poles use adjustable stainless steel pulleys to easily achieve a perfect sliding effect..
  • 【SCOPE OF APPLICATION】 This is a miter slide bar, used to construct various jigs on the table saw, such as miter sleds, etc..
Check Stock