ReviewsMiter Gearbox

Anodized Aluminum Miter T Track w/T-Bar Rail for Jigs Fixtures Sleds Router Tables and General Woodworking 32 inch MADE IN THE USA

• When building sleds or fixtures, workshop tables, router table tops or any type of jig or fixture that helps hold stock in place or helps feeding stock through a cutter, miter t track will help make it so much easier. Miter T Track does this by allowing devices like miter gauges to effortlessly slide through the track for cutting applications and it can also accept fixtures with the proper hardware like featherboards to keep your stock firmly against a fence..
• The Miter T Track has a “T” shape to it so that it can accept the discs on the ends of many miter gauges. This essentially means that your ¾” x 3/8” bar on your miter gauge will fit neatly into this track even with the disc on the end. Of course you don’t have to have a bar with the disc on the end. Wether you’re making a table top for your router, your band saw or simply building a sled, a standard ¾” x 3/8” thick bar will do the trick!.
• The “T” shape on the Miter Track also accepts the T-bar. The T-bar has been designed to fit neatly into the miter track profile for use with jigs, fixtures or sleds. The T-bar is made from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards wher
  ....

POWERTEC 71143 Deluxe Miter Gauge for Table Saw | Miter Guide with 120 Angle Stops

• Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
• Features: a lightweight design with a durable laser-cut aluminum construction, Large gauge handle, universal fence mounting bracket pivoting locking mechanism, A removal plate that allows the miter gauge to be used with t-slotted and non t-slotted miter slots, and adjustable Expansion discs that remove all side play from the bar, creating a perfect fit.
• Precision: angle guide (with 120 total angle stops) in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
• Universal design:suited for most standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular Brand table saws, band saws, Router tables, disk and belt sanders.

FTVOGUE Aluminium Alloy Miter Bar Slider Table Saw Miter Gauge Rod Wood Woodworking Tool (450mm/17.71inch)

• This miter rod is made of high quality aluminium alloy, miter bar is of strong strength and reliable durability for several year using without abusing..
• This is a miter bar usually used in table saw woodworking works .Universal threaded mounting holes for convenient use..
• Adjustable stainless steel runner for perfect sliding action. For building various jigs on your table saw, like miter sleds etc..
• Miter slot bar is easy to assemble, making it very easy to construct that ideal jig without dealing with the wood runners and the swelling issues..
• These rockler miter bar easily in the miter slot when adjusted well, there is no side to side movement at all which makes for very accurate cuts..

POWERTEC 71568 Aluminum Miter T-Track with Miter T-Bar, 32-Inch

• FUNCTION: The POWERTEC Miter track and bar set is designed to help build an assortment of sliding jigs and fixtures, while enhancing overall bench top table tool precision and functionality..
• APPLICATIONS: Ideal for benchtop table saws, router tables, band saws, and other woodworking shop projects that require a versatile set of miter track channels.
• DESIGN: Both anodized aluminum extrusions possess a heavy duty construction, and feature a center guide track perfect for drilling and project alignment - The miter t-bar slides seamlessly into the miter track or t-slot.
• SIZE SPECIFICATIONS: T-track works with ¾” x 3/8” miter gauges, with or without t-slot plate.
• t- bars fit perfectly into t-slotted miter gauge slots - The 32" length can be custom cut to suit your individual project requirements.

DEWALT 12-Inch Miter Saw Blade, Crosscutting, 100-Tooth (DW72100PT)

ZEROPLAY 360 Sled Kit

• ZEROPLAY Miter Bar’s hassle-free miter bars using One-Touch Calibration..
• ZEROPLAY Miter Bars will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0. 73" and 0. 79" wide and at least 5/16" deep..
• Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks..
• No slop, side-to-side play or seasonal warping..

Angle Finder Aluminum Miter Saw Protractor, Rust Proof Angle Finder Featuring Precision Laser Engraved Scales Miter Angle Finder for Carpenters, Plumbers and All Building Trades

• Angles are no longer a guess: Easily measure the inside-outside angles. Fit for woodworking, carpentry trimming, or DIY jobs. Fast and easy-to-find miter cuts. It will save you so much time and a LOT of money on wasted wood. Quick and easy to use, with no need for complex or expensive tools. just hold the protractor up to the angle, read the degree measurement for the miter cut, set your miter saw at that angle, and cut your piece. It reads single cuts as well as miter cuts..
• Fast and easy-to-find miter cuts: Provides you the exact angle you need, either inside or outside corners. Its two plates can directly transfer your work angle to the miter saw for an accurate miter cut and single cut, saving you time and effort. Very easy to use and read, get an edge or corner miter perfect. The EVERSEE protractor couldn't be simpler. Compact and adjustable design makes it easy to carry and convenient to use. MAKE YOUR LIFE SO MUCH EASIER when it comes to making accurate cuts..
• Durable engineered aluminum alloy & rust-proof: Durable construction ensures long-lasting performance. It is designed to be compact and lightweight. It eliminates calculations, reduces errors, ....

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

• When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
• The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
• Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simpl....

Mini Cut-off Miter Saw, 110V Mini Benchtop Cut-Off Chop Saw-Adjust Miter Gauge with 2' Blade 1/2' Cuting Depth Miter for Arts Cutting Wood Plastic Metal DIY Working

• Mini cut-off miter saw fit for cutting soft wood, plastic, aluminum, copper, fiberglass, brass perfect for all your DIY projects..
• 110V mini benchtop cut-Off chop saw fit to cuts upto 1/2″ thick wood or 1/2″dia metal tube, cuts miter corners from 0° to 45° with adjustable miter guage..
• Mini miter cut-off chop saw of main parameters: Maximum speed 7800 rpm and 3/8-Inch arbor, 2-Inch blade diameter and 0 .02 inch blade thickness..
• mini craft miter saw, mini cut off saw, 2 inch chop saw, mini miter table saw, 2 chop saw, power mini miter saw, miniature miter saw, mini bench saw, miniature cut off saw, miniature craft miter saw.(Note:it can only cut softmetal (like brass, aluminum) with thickness less than 3mm, it can not cut hard metal (like stainless steel/iron) and thick metal..
• 100% satisfactory service, if you have any questions, please feel free to contact us by email ! We will solve it for you in the first time!.

DEWALT Miter Saw Stand, Heavy Duty (DWX723)

• Universal design of DEWALT miter saw stand works with all brands of miter saws.
• Lightweight aluminum construction (29 lbs.) of DEWALT miter saw stand allows for easy transport to and from the jobsite.
• 5-1/2 ft. beam extends to support up to 16 ft. of material and up to 500 lbs..
• Legs provide superior support and fold for easy storage.
• Leg Lock Levers allow for fast and easy set up.
• Miter saw mounting brackets allow easy and secure mounting of miter saw to stand.
• Work stops/supports can be repositioned quickly anywhere along the rail.
• Non-marring feet on tool mount will not scratch material.
• Extension lock levers allow for fast and secure tightening of extensions.

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

• ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
• ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
• ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
• ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....