ReviewsMiter Shears Lowess

ZEROPLAY 360 Sled Kit

  • ZEROPLAY Miter Bar’s hassle-free miter bars using One-Touch Calibration..
  • ZEROPLAY Miter Bars will fit ANY standard (3/4” x 3/8”) T-Track miter slot that measures between 0. 73" and 0. 79" wide and at least 5/16" deep..
  • Compatible miter tracks include but not exclusive to: SawStop, Bosch 4100, Delta Unisaw, Powermatic, Rigid, Dewalt, and General 350 Tracks..
  • No slop, side-to-side play or seasonal warping..
Check Stock

Angle Finder Aluminum Miter Saw Protractor, Rust Proof Angle Finder Featuring Precision Laser Engraved Scales Miter Angle Finder for Carpenters, Plumbers and All Building Trades

  • Angles are no longer a guess: Easily measure the inside-outside angles. Fit for woodworking, carpentry trimming, or DIY jobs. Fast and easy-to-find miter cuts. It will save you so much time and a LOT of money on wasted wood. Quick and easy to use, with no need for complex or expensive tools. just hold the protractor up to the angle, read the degree measurement for the miter cut, set your miter saw at that angle, and cut your piece. It reads single cuts as well as miter cuts..
  • Fast and easy-to-find miter cuts: Provides you the exact angle you need, either inside or outside corners. Its two plates can directly transfer your work angle to the miter saw for an accurate miter cut and single cut, saving you time and effort. Very easy to use and read, get an edge or corner miter perfect. The EVERSEE protractor couldn't be simpler. Compact and adjustable design makes it easy to carry and convenient to use. MAKE YOUR LIFE SO MUCH EASIER when it comes to making accurate cuts..
  • Durable engineered aluminum alloy & rust-proof: Durable construction ensures long-lasting performance. It is designed to be compact and lightweight. It eliminates calculations, reduces errors, ....
Check Stock

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simpl....
Check Stock

Mini Cut-off Miter Saw, 110V Mini Benchtop Cut-Off Chop Saw-Adjust Miter Gauge with 2' Blade 1/2' Cuting Depth Miter for Arts Cutting Wood Plastic Metal DIY Working

  • Mini cut-off miter saw fit for cutting soft wood, plastic, aluminum, copper, fiberglass, brass perfect for all your DIY projects..
  • 110V mini benchtop cut-Off chop saw fit to cuts upto 1/2″ thick wood or 1/2″dia metal tube, cuts miter corners from 0° to 45° with adjustable miter guage..
  • Mini miter cut-off chop saw of main parameters: Maximum speed 7800 rpm and 3/8-Inch arbor, 2-Inch blade diameter and 0 .02 inch blade thickness..
  • mini craft miter saw, mini cut off saw, 2 inch chop saw, mini miter table saw, 2 chop saw, power mini miter saw, miniature miter saw, mini bench saw, miniature cut off saw, miniature craft miter saw.(Note:it can only cut softmetal (like brass, aluminum) with thickness less than 3mm, it can not cut hard metal (like stainless steel/iron) and thick metal..
  • 100% satisfactory service, if you have any questions, please feel free to contact us by email ! We will solve it for you in the first time!.
Check Stock

DEWALT Miter Saw Stand, Heavy Duty (DWX723)

  • Universal design of DEWALT miter saw stand works with all brands of miter saws.
  • Lightweight aluminum construction (29 lbs.) of DEWALT miter saw stand allows for easy transport to and from the jobsite.
  • 5-1/2 ft. beam extends to support up to 16 ft. of material and up to 500 lbs..
  • Legs provide superior support and fold for easy storage.
  • Leg Lock Levers allow for fast and easy set up.
  • Miter saw mounting brackets allow easy and secure mounting of miter saw to stand.
  • Work stops/supports can be repositioned quickly anywhere along the rail.
  • Non-marring feet on tool mount will not scratch material.
  • Extension lock levers allow for fast and secure tightening of extensions.
Check Stock

DWE7402DI Dado Throat Plate, Table Saw Parts Insert Accessories Replacement for 10-Inch Portable Table Saw DEWALT DWE7490, DWE7491 Versiones

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

Miter Saw Protractor, XUNTOP 7-Inch Aluminum Miter Protractor with Mini Level Gauge Rust Proof Angle Finder Featuring Precision Laser Engraved Scales for Carpentry, Crown Molding, Baseboard, DIY-Black

  • 【Accurate Miter Saw Protractor】Compare with the plastic miter protractor, XUNTOP miter saw protractor can provide accurate angle calculations for the highest precision Single/Miter cutting, beacuse it is made of high quality anodized aluminum alloy steel. And the internal Teflon O-ring mechanism swivels during operation and ensures smooth & precise read on inside/outside corners..
  • 【Easy to Use】This miter saw protractor rotates a full 360 degrees for measuring any odd angles, and it tells you where to set your saw directly for an accurate Miter cut, and Single cut with no calculations. Very easy to transfer an odd angle from piece to piece, making most cutting work much more accurate and reducing hand fitting for making nice clean cuts without guessing at angles and wasting material.
  • 【Easy to Read Numbers】The markings on miter saw protractor is precision laser engraved,and white markings on black background are much easier to read, even without bright light..
  • 【Durable Saw Protractor】This miter angle finder is made of solid CNC-machined anodized aluminum alloy steel with a black anodized finish, and the 1/4-inch thick aluminum alloy is stronger and won't bend like the plastic ones, resistant to scratch for daily use. It feel....
Check Stock

Miter gauge,Table saw miter gauge,Table saw fence system,Miter gauge table saw accessories,With clamping device,Precision Miter Gauge,For table saw 5/8 slot with miter gauge fence

  • ❤ [A good helper for table saws] If you have a table saw and need to cut at any angle, then you will know the value of a miter gauge. You may also know that the miter gauge that comes with the saw is not very accurate or durable. Not to mention the fit in the miter groove may not be so good. And our high-quality miter gauges can meet your table saw cross-cutting needs..
  • ❤[High-quality material] The guide rod and baffle of the table saw miter gauge are made of all aluminum to ensure its durability and firmness, rust and wear resistance, and the table saw miter gauge fence is made of aluminum alloy die-casting, which has better accuracy. high..
  • ❤[With clamp] The table saw miter gauge is composed of a miter gauge clamp, a material baffle, and an angle push plate. The clamps can be adjusted by screws to fix different cutting objects, which is not possible with other mitre gauges without a holder. The bottom of the mitre gauge is equipped with a 5/8 groove for the mitre gauge, and the all-aluminum slide bar slides smoothly ..
  • ❤ [Easy to operate] The miter gauge is cut at a precise angle of 60° on both sides with pointers. If you need to adjust the head, you only need to loosen the column knob and rotate the head to the desired position, so loosen th....
Check Stock

Miter T-Bar for Jigs Fixtures Sleds Router Tables and General Woodworking 48 inch MADE IN THE USA

  • When building sleds, jigs or fixtures for your woodworking projects that help keep your fixtures from moving or to help your sleds and jigs slide through a track, the Miter T Bar may just be the perfect solution. The Miter T Bar does this bit fitting neatly into most standard miter slots that measure ¾” x 3/8”. The aluminum bar can be used to slide your sleds or it can be used to lock fixtures like featherboards (when cut into smaller length pieces) in place in a miter slot..
  • The T-bar is made in the USA from a solid piece of extruded aluminum and can be cut into sections and drilled as needed. Typical uses for the T-bar are fixtures like featherboards where the featherboard needs to be kept stationary to apply consistent pressure. The T-bar also works great for sleds and other sliding fixtures like cutoff sleds on a table saw or coping sleds on a router table..
  • When mounting the Miter T-Bar it is a good idea to keep in mind that the “T” on the bottom of the track is approx. 1/8” tall, which is just enough to clear the t-slot on most miter slots. If mounted directly to platform for a sled, the tabs may catch and prevent the sled from sliding freely. To remedy this, we recommend using washers between the mounted track and the platform to....
Check Stock

Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc

  • If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used..
  • To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8....
Check Stock

Metabo HPT 10-Inch Sliding Compound Miter Saw Double-Bevel Electronic Speed Control 12 Amp Motor Electric Brake 5-Year Warranty C10FSBS

  • MOTOR: 12 amp motor for professional power.
  • BEVEL: 0-45 degree bevel angle range, to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place.
  • MITER: 57 degree miter angle to the right, for ultra flexibility with 45 Degree miter angle to the left.
  • MITER SCALE: White on black miter scale for superior accuracy and visibility.
Check Stock