ReviewsMitsubishi Oil Pump

915P049010 TV Replacement Lamp Original Quality Bulb with Housing for Mitsubishi WD-52631 WD-57731 WD-57732 WD-65731 WD-65732 WD-Y57 WD-Y65 Projectors by WiseGear

  • ♥ Good quality lampwick inside bare bulb makes everything on the screen looks clearer..
  • ♥ Premium quality, high brightness,extra long lifetime up to 4000-5000 hours..
  • ♥ Housing included,easy install that minimize installation time to make sure your device is back in action..
  • ♥ WiseGear projector bulbs provide customers with 180 days warranty and 30 days 100% refund guarantee..
  • ♥ Compatible for MITSUBISHI WD-52631 MITSUBISHI WD-57731 MITSUBISHI WD-57732 MITSUBISHI WD-65731 MITSUBISHI WD-65732 MITSUBISHI WD-Y57 MITSUBISHI WD-Y65 Projectors..
Check Stock

12v 80w Electric Oil Change Transfer Pump Extractor Kits for Boat/Car/Lawn Mower Marine/Jet Ski/Truck/RV/ATV Changing Diesel Fluid Scavenge Suction

  • 80w OIL CHANGE EXTRACTOR - The engine oil transfer pump is 80w. Extracting motor oil from vehicles quickly and cleanly. It can be used for changing oil 3L/min. Not compatible with water and petrol, gasoline, kerosene..
  • EASY ENGINE OIL CHANGE - The 12v oil extractor pump comes with 2 extractor tubes, easy for a top down oil change by single ON/OFF switch controll. Pumps oil out throw dip stick, no need to lay under the machines or vehicles. The oil will simply draw out the motor through the oil dipstick bore..
  • MULTIFUNCTIONAL OIL EXTRACTOR PUMP - The oil change pump kit fits for Car, Boat, Jet ski, Motorcycle, Scooter, Marine, Quad Bike, Truck, Forklift, Generator, Tractor, Riding Mower, Snowmower, etc, siphoning & transfering diesel, oil to other Cars, Trucks, Ships, Boats, Tractors, Farm Machinery, Plant Equipment Etc..
  • PORTABLE OIL PUMP CHANGE EXTRACTOR - The oil transfer pump is mini but powerful. With 5ft Outlet tube & 4ft Inlet tube, the 8.2ft long battery clamps makes the extractor pump kit possible for being used at large range. The 2 hoops are used to tighten the tubes to avoid oil spilling..
  • FOR DIFFERENTIAL FLUID TRANSMISSION - This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. Place the inlet/outlet ho....
Check Stock

M295 Standard Volume Oil Pump - Compatible with 4.8L, 5.3L, 6.0L Chevy Silverado, Suburban, Tahoe, Trailblazer, GMC Sierra, Yukon, Cadillac Escalade - Replace M295, 12696357, 12586665

  • M295 STANDARD VOLUME OIL PUMP - A mechanical device that circulates oil to the bearings, camshaft and pistons of an engine. A failed oil pump will cause low oil pressure, engine overheat, and unusually noise from the engin. If you notice any of the symptoms, you will need to have your oil replaced..
  • FIT THE FOLLOWING VEHICLES - Standard volume & standard pressure oil pump compatible with 4.8L 5.3L 5.7L 6.0L GM Vortec V8 engine oil pump, induding Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier, model year 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020..
  • REPLACE PART NUMBER - Replace GM 12696357, 12586665 oil pump, replace Melling M295 oil pump. Commonly found on Chevrolet Silverado, Suburban, Tahoe, Avalanche, Camaro, Express, Trailblazer, GMC Sierra, Yukon, Savana, Envoy, Cadillac Escalade, Buick Rainier with 4.8 5.3 5.7 6.0 V8 Vortec Engine..
  • OEM DESIGN & DIRECT FIT - Quality materials & advanced technology used, meets or exceeds OEM standards. Even though this is not a genuine GM or Melling oil pump, but it works even better and lasts longer. Save yourself times and money ....
Check Stock

Oil Change Pump Extractor 12v 60w Oil Extractor Pump Oil Pump Extractor Diesel Fluid Scavenge Suction Oil Transfer Pump for Changing Oil Oil Change Pump for Boat Tubes Truck RV ATV Riding Mowe

  • QUICK AND CLEAN OIL CHANGES - Transfer pump for changing oil. Extracting Motor Oil From Your Vehicle Without Mess & Specialized Tools Extract The Oil....
  • ENGINE OIL CHANGE MADE EASY! - The 12v oil extractor pump are very easy to use and makes a top down oil change so easy. Pumps oil out throw dip stick,....
  • FOR DIFFERENTIAL FLUID AND TRANSMISSION FLUID - This high efficient self-priming oil extractor pump is easy to pump various fluids and oils. You just....
  • PROFESSIONAL OIL CLEANING TOOL - The oil transfer pump is NOT suitable for gasoline/petrol. Do not use this fluid oil change pump to extract water,....
  • 100% CUSTOMER SATISFACTION GUARANTEED - 1MANNEW OIL CHANGE PUMP EXTRACTOR - 12 Volt / 5 Amp DC Motor.Ideal Transfer Pump for your quick and clean....
Check Stock

kweiny Pneumatic Fluid Extractor for Automotive Brake and Clutch and Power Steering Fluid

  • Easy to pump Multi-fluid out: The oil extractor works by sucking the oil from the crankcase through a thin hose inserted in the dipstick opening then you pump repeatedly to create a vacuum that pulls the hot oil into an easy-to-carry container with 6L capacity. You can pump any type of fluid, like engine oil, transmission, radiator coolant, water, and more without much effort and mess..
  • Multi-size Hoses: There are four size hoses for your choice if you buy a Kemimoto oil vacuum pump extractor: 2.5mm/ 4mm/ 6mm/ 8mm to apply different engine or machine..
  • Wide Application: Fluid pump extractor evacuates fluids directly from dipstick tubes.
  • At 6 liters of capacity, this manual oil and fluid pump can be used as an oil change pump extractor and fluid transfer pump on most light and heavy duty vehicles, tractors, garden gas mowers, marine engines, small aircraft engines, industrial gear boxes, and coolant and hydraulic systems, etc..
  • Perfect Tool for DIY'er: This handy manual oil pump extractor is the perfect design for professional and DIY mechanics to remove the oil easily and quickly and a pour spout is included to help empty containers for recycling the oil..
  • Product Feature: This 6L fluid capacity hand pump is made of HDPE durable material and a shut....
Check Stock

Hand Diesel Transfer Pump,55 gallon drum pump Aluminum alloy corrosion resistant,For 5 to 55 gallon drum

  • Fuel Pump: The hand pump is perfect for transferring various oils, such as fuel oils, diesel, lubricating oil and more. Ideal for use at home, industry, marine, and farms. Note: Not suitable for pumping water or corrosive liquids..
  • Corrosion resistant: This drum pump is made from high quality aluminum alloy, light weight, easy to carry, durable and corrosion resistant..
  • PUMP OIL QUICKLY : Oil Transfer Pump pump oil up to 30L/min,With this hand crank pump, you can pump oil quickly and easily from barrels and oil drums and small tanks..
  • EASY TO OPERATE : Fits 5 gallon to 55 gallon drums, Easy to handle and operate, it can be assembled quickly and disassembled after use for convenient storage..
  • The hand pump hose extends to 24 inches and the hand pump comes in a box for easy portability..
Check Stock

GPI - L5132 High Viscosity Oil Pump, 32 QPM, 230AC/115V Oil Transfer Pump for Viscous Fluids That Features a 0.75” Ball Valve Nozzle, 8 Foot Hose, 3 Foot Power Cord with Three-Prong Plug (142100-02)

  • DURABLE ALUMINUM HOUSING: Our gear oil transfer pump is for high viscosity fluids and lubricants. Engineered with the lightweight cast aluminum housing and gerotor gear design, our oil extractor pump ensures long life and minimal maintenance. With the rugged 230/115-volt AC motor, our oil pump delivers a flow rate of 8 GPM or 32 QPM (30L/min)..
  • HEAVY-DUTY OIL PUMP: The L5132 is specially designed for use with new oil (up to 90 wt), waste oil, hydraulic fluid, antifreeze, or other non-flammable oil-based solvents. Our high viscosity pump is highly productive when used to pump drums, bulk tanks, waste oil reserves, and other oil containers. Modeled to fit easily to a barrel or drum, this oil extractor quickly transfers all incombustible liquids!.
  • EXTENDED MOTOR LIFE: The smart thermal protection design extends the motor life of our heavy-duty oil pump with the versatility to handle a variety of fluids without the risk of overheating. The weight centering inlet base of the pump reduces the tank stress and the pressure relief valve offers the easy strainer access..
  • EASY-TO-USE: Accompanied by a pre-installed 3 foot power cord with a three-prong grounded NEMA plug, this oil pump greatly reduces assembly and installation time. The pump includes an 8 foot long....
Check Stock

THINKWORK Oil Pump Extractor, 12V 80W Marine Oil Change Pump and Electric Oil Pump, with Overheat Protector for Boat, Car, Speedboat, Motorcycle

  • SAFETY&OVERHEATING PROTECTION-Except engine oil, diesel oil and coolant, the oil pump must not pump any flammable liquid or water to avoid accidents. Before use, be sure to heat the car engine to 104°F-140°F for about 15 minutes to avoid clogging the oil pump due to the solidification of the oil. When the oil pump is overheated, the newly added overheat protection device will automatically cut off the power supply. At this time, please check whether the hose is blocked or the oil is too sticky..
  • QUICK OIL CHANGE - DC 12V 80W has enough power, you only need to clamp the conductive clip on the motor and open the switch to start it, so that you can complete the oil pumping work smoothly and effectively, replacing the traditional oil change method and reduce tedious workload (diesel flow: 1.5L / m, oil flow 0.3L / m)..
  • UPGRADED OIL PUMP-Everyone needs a portable and small oil pump, simple operation does not need to spend too much time for practice, widely used in motorcycles, scooters, ships, quad bikes, trucks, ships, forklifts, power generation machinery, tractors , Lawn mowers and various machinery to change the oil..
  • ACCESSORIES & PRECAUTIONS - The oil pump has 1 outlet hose, 1 inlet hose, 2 hose locks and 2 battery clips. Please pay attention to the ....
Check Stock

Lawnmower

  • ❥❥❥ Widely Application: It is great for pumping fuel oils, petrol, diesel, lubricating oil, cooking oils and many other oils. BUT DO NOT pump....
  • ❥❥❥ Main Function: With this hand crank pump, you can pump oil quickly and easily from barrels and oil drums and small tanks. Keep this pump in....
  • ❥❥❥ Use Tips: Add some oil that requires pumping into the pump to prime it before you start to pumping oils. Lubricate the pump with grease is....
  • ❥❥❥ Specifications: Main Material: Aluminum Alloy. Inlet Diameter: 3cm / 1.18in. Outlet Diameter: 2.5cm / 0.98in. Length: 124cm / 48.81in.....
Check Stock

Masday 12V Gasoline Inline High Pressure Fuel Pump ,200LPH High Flow 125PSI ,16.4 Feet of Super Suction Power,Universal Replacement 0580464070.

  • 1piece 12V electric fuel pump,1piece internal fuel filter (already fitted),1piece Car wash towel,2pcs rubber connection covers,2pcs insulated terminals,2pcs spring washers,2pcs nuts.
  • [Product Compatibility]: This fuel pump is suitable for BMW 318i 325e 325i 528e Mitsubishi Starion Tredia VW Transporter 1985 1986 1987 Universal Replacement 0580464070..
  • [Product features]:External fuel pump sturdy structure, stable performance, 16.4 feet super suction power. Easy installation, widely used for transferring fuel on gasoline vehicles and modified vehicles!.
  • [Quality embodiment]:Simulated loading experiments to check the air tightness, professional tester testing to exclude jitter and noise, precision instrument testing to ensure the pressure and flow, multi-channel manual inspection of product appearance.Ensure 100% satisfaction with the customer shopping experience degree..
  • [Data support and after-sales service]: Ten minutes/10 gallons, operating voltage 9-16 volts, operating pressure 0-125 PSI. we offer a full refund service within one year after the sale and a 2-year warranty!.
Check Stock

TERA PUMP Portable Power Water / Fuel Transfer Battery Pump with Auto-Stop Sensor ( 2.4 GPM )

  • Upgrade 55 Gallon Drum Pump: 32mm Larger Oil outlet tube diameter for quicker oil transfer, Oil outlet pipe length 39 Inch, Overall Length 51 Inch, that can be adjusted to fit 15 - 55 gallon drums..
  • Heavy Duty Barrel Pump: Constructed with Aluminium alloy Steel, heavy duty & rugged, anti-corrosion and anti-rust for more durability..
  • Leak-Free Oil Pump: Our barrel pump is consisted of 3 piece segmented suction tube with screw thread, good sealing effectively prevent oil leakage..
  • Easy to Use Hand Pump: Great Filter at the bottom of the suction tube separate the oil and the oil dirt effectively. Hand Drum Pump Flow Rate 200-250ML (About 16 GPM ) . Support clockwise direction rotary..
  • Widely Used: This rotary barrel pump is suitable for pumping gasoline, kerosene, oil, diesel, hydraulic fluid lubricating oil, other non-corrosive liquids, NOT use for water!.
Check Stock