ReviewsMks Base V3 Firmware

6F50/6F55 Transmission Valve Body Solenoid Module Replacement Da8P7G391Aa,Da8P7G391Ab Fit For Explorer 2007 2018 6F50 Transmission 6F50 Solenoid

Compatibility?¡§ooSpecially designed for Ford Edge/Explorer/Flex/Fusion/Taurus, and fit for Lincoln Continental/MKS/MKT/MKX/MKZ..
Powerful function?¡§ooThe solenoid module restores the ability to shift the vehicle in and out of gear without hesitation or rough.

Check Stock

AURSINC WiFi Deauther Watch V3 ESP8266 Programmable Development Board | Wearable Smartwatch | OLED&Laser | Attack/Control/Test Tool|LOT for DSTIKE NodeMCU

ORIGIN DSTIKE Watch V3, with better performance and appearance than V1&V2, is wrapped by the Arcylic cover and 3D print transparent case, moreover, equiped with upgraded software system, which is easier to operate..
WiFi Test Tool: installed with the latest ESP8266 Deauther software, the deauther watch can perform different secure tests for your WiFi networks, equiped with 5dB FPC antenna. NOTE: ESP8266 supports 2.4GHz only..
Extensible: Deauther wathch V3 also can be used to develop your own software, it is indeed a ESP8266 development board, easy to operate..
LONG WORKING TIME: DSTIKE Deauther watch has a built-in an 800mAh battery, the maximum working time of the WiFi Deauther wristband reaches 8 hours, also the battery can be charged while in use. Moreover, the watch is equiped with OLED display and a 3-way momentary slide switch..
NOTE: the wifi deauther watch can be used only for testing and educational purposes on your own devices! Firmware and Software download please refer to the below description..

Check Stock

Original Creality Ender 3 V2 Filament Runout Sensor Smart Filament Sensor Break Detection Module Detector for Ender 3 pro Ender 6 CR-10S PRO CR10 V2 V3 Ender3 Max 3D Printer

Only used for 32bits motherboard like version 4.2.2, 4.2.7. Suitable for Ender 3/ Ender 3 V2/ Ender 3 pro / Ender 6 / CR-10S PRO/ CR-10 V2 V3/ENDER 3 MAX. But the installation bracket is only used for Ender 3 series, as Ender 6 and cr10s pro printer already have the sensor installation holes or bracket.
Independent Modularized Design: it is redesigned with new inner structure. The outer cover is frosted, making it stylish and unique.
Filament breakage detection device contains micro switch, using the principle of mechanical proximity switch, no friction, can ensure the smooth feeding of filaments..
Precise Detection: Blue LED indicates normal filament feed-in.
Blue LED turns off when filament runs out..
IMPORTANT: For Ender 3 V2, Ender 3 and Ender 3 pro, you need to flash your motherboard's firmware before using, about the firmware download way, please check the following description or the instrument in the pack. as Ender 6 and CR10S PRO printer's firmware has been setted with filament detection function, so you can use them directly..
Package: 1 filament detector sensor, 1 extended cable, 1 installation bracket(This bracket is only used for Ender 3 / V2 / Pro, Filament detection bracket or holes already set up in the Ender 6 and CR10S PRO).

Check Stock

BIGTREETECH Octopus V1.1 32bit Control Board + TFT35 E3 V3.0.1 Touch Screen Display + 8xTMC2209 V1.3 Stepper Motor Driver DIY for Voron V2.4 3D Printer Controller Board Support Klipper Raspberry Pi

⭐SUPER PERFORMANCE CHIP: BIGTREETECH Octopus control adopts 32-bit ARM-level Cortex-M4 series STM32F446ZET6 chip with a frequency of up to 180MHz, and supports 8 stepper motors. Equipped with highly modular open source firmware Marlin2.0, which greatly improves the overall performance of the motherboard, and all the functions of the motherboard do not require any expansion modules, and supports running Klipper and Marlin firmware.
⭐SUPER MULTI-FUNCTION CONTROL PANEL: Support material interruption detection, continuous printing after power failure, shutdown after printing, BL_Touch, support online printing, etc. Upgrading the configuration firmware through the SD card, the operation is simple, convenient and efficient. Using high-performance MOSFET, the heat dissipation effect is better..
⭐MULTI-FUNCTION DISPLAY: TFT35 E3 V3.0.1 touch screen has higher compatibility. You can choose two working modes: UART serial screen mode and 12864 screen mode. The WIFI port is reserved, and the WIFI function is implemented by an external WIFI module.SD card update firmware is simple and convenient, download from our github, copy and save to SD card.

Check Stock

Wasserstein Protective Silicone Skins Compatible with Wyze Cam Outdoor ONLY - Black 2 Pack NOT Compatible with Wyze Cam/V2/Pan Wyze Cam Outdoor NOT Included

Designed for Wyze Cam v3 1080p HD Indoor/Outdoor Video Camera, not for wyze cam pan..
Add a layer of protection to your Wyze Cam v3 Indoor/Outdoor Video Camera，extra small wall mount bracket is also provided..
Allows full use of the Wyze Cam v3 base, ports and sensors..
CAMERA NOT INCLUDED！！This product is only an accessory for Wyze Cam v3 1080p HD Indoor/Outdoor Video Camera..
After-sales guarantee, product quality problems within six months, return or exchange..

Check Stock

for ROLAND MKS-80 Original Factory & NEW Created Sound Library & Editors on CD or download

New Life for your beloved old-school Synth`s.
ROLAND MKS-80 Large Original Factory & New Created Sound Library & Editors on CD or download. Sound Library over 1,300 the Legendary MKS-80 original factory and new created voices (Banks/Patches/Single Voices).
THE Legendary ROLAND MKS-80 Sounds: Dance, Rock, Alternative, Pop, Orchestra, Band, Pianos, Rhodes-Piano, Electric and Acoustic Instruments, Solo, Strings, Pads, Bass, Drums KIT and Percussion, FX....
All set`s include huge sound library and editors. You can load/save/edit single voices/patches/banks/effects in computer and transfer to your synth. Very easy to installing and work. You need computer, synth, midi cable (in/out) and midi interface to connect your synth to the computer sound card..
NOTE! This is NOT actual synthesizer! Sound Library and Editors ONLY! We offer a big selection original factory and created sounds/single voices/patches in SYSEX Format for download in real synthesizer..

Check Stock

Hobbywing Ezrun MAX5 ESC 3-8S

This is the Hobbywing EZRun MAX5 V3 1/5 Scale Waterproof Brushless ESC. Compatible with 3-8S LiPo power, the MAX5 provides the ultimate power upgrade....
High Reliability & Durability: Built with the most rugged and high-quality components and coupled with cutting-edge firmware, the EZRun MAX5 is able....
Great Flexibility & Versatility: With incredible acceleration capabilities and a rock-solid, stable output, the MAX5 can handle instant full-torque....
Applicable for All Weather Conditions: The waterproof and dust-proof design allows the MAX6 to be used in all weather conditions without any issue of....
High Voltage Built-in BEC: The MAX6 has adopted the world's first HV built-in BEC with an output current of up to 25Amps and a switchable output....

Check Stock

MKS SERVO42C NEMA17 Closed Loop Stepper Motor Driver Low Noise for CNC 3D Printer Prevent Losing Steps Compatible with Gen L SGen L SKR 2 / V1.4 Turbo BTT Octopus V1.1 Mainboard

MKS servo42C is a product developed by MKS to meet market demand. The closed-loop motor uses the motor's rotation angle feedback to the drive circuit to detect whether every step that should be taken has been taken to prevent losing steps. If a closed loop occurs, the motor will make up or lose steps through the feedback information, and the blue LED on the closed loop module will light up..
Support 1-256 subdivision,odd subdivision (such as 11 subdivision) is also available. And support motors with 0.9 degree or 1.8 degree. Maximum speed 1000RPM. With usart interface, you can connect the computer by serial port, for parameter adjustment and query..
Position /speed/torque closed-loop, it can run at high speed without losing step. Easy to install and wire. The max printing speed can reach 150-180mm/S. Field-Oriented control, low noise, low vibration and low calorific. 4 Half bridge driver with 8 MOSFET, high operating efficiency. 14Bits magnetic encoder, high angle resolution..
Compatible with Gen L SGen L, SKR 2 / V1.4 Turbo BTT Octopus V1.1 Motherboard and other board which is seperated with drivers, that means drivers is not soldered onto the board.
Package: 1*MKS SERVO42C(include motor) + 1*Adapter board(MKS APT) + 1*60cm 6pin Data Cable . (User metho....

Check Stock

WSDMAVIS 1 Pcs JR J-R Programmer V2 with 3 Cables Set for XBOX360 Compatible with NAND-X QSB's

Fast NAND Programming.Fast XILINX CR JTAG Programming..
Compatible with all CoolRunners inc the new CR3 Pro.Supports Full Post Monitoring..
Compatible with both Phat and Slim.Onboard LED's indicate Power & Data..
Easy Install System Compatible with All NAND-X QSB's,includes KIOSK option,for Remote On Built-in Programmer,for Future Firmware Upgrades..
Package included:1x TX J-R Programmer V2,1x Cable For QSB V3 Kit,1x Cable For Xilinx CRJTAG,1x Cable for Sonus 360..

Check Stock

Brand New J-R XBOX360 Programmer V2 with 3 Cables Set

★Specification - Fast NAND Programming Fast XILINX CR JTAG Programming Compatible with all CoolRunners inc the new CR3 Pro Supports Full Post Monitoring Compatible with both Phat and Slim Onboard LED's indicate Power & Data..
★Fitment - Compatible with All NAND-X QSB's Includes KIOSK option for Remote On Built-in Programmer For Future Firmware Upgrades Designed for the latest J-Runner App (Build 283+) Rock Solid Design ..
★Please Note - This is high a quality AFTERMARKET part . Please check pictures for more details, and check your part number and our fitment before placing an order..
★Package Contents - 1x TX J-R Programmer V2, 1x Cable For QSB V3 Kit, 1x Cable For Xilinx CRJTAG, 1x Cable for Sonus 360..

Check Stock

TP-Link EAP620 HD V3 | Omada WiFi 6 AX1800 Wireless Gigabit Access Point for High-Density Deployment | OFDMA, Mesh, Seamless Roaming, MU-MIMO | SDN Integrated | Cloud Access & Omada App | PoE+ Powered

...ased Controller Details). Standalone mode also supported..
【Cloud Access & Omada Compatibility】Remote Cloud access and Omada app enables centralized cloud management of the whole network from different sites—all controlled from a single interface anywhere, anytime. For devices that are compatible with SDN firmware, please visit ‘From the manufacturer – Q&A’ section or TP-Link website..
【Advanced Wireless Tech】Supports Mesh WiFi, Seamless Roaming*(Omada Mesh & Seamless Roaming require the use of Omada SDN controllers), Band Steering, Load Balancing, Airtime Fairness and Beamforming technologies..
【Multiple Powering Options for Easy Installation】EAP620 HD V3 supports both 802.3at PoE+, 48V/0.5A Passive PoE and 12V/1A DC power supply, can be either powered by a TP-Link PoE+ switch, a Passive PoE adapter (Suggested TP-Link Model: TL-PoE4824G) or the provided 12V/1.5A DC adapter, making deployment effortless and flexible..
【Limited Lifetime Warranty】Backed by our industry-leading limited lifetime warranty and free 24/7 technical support, you can work with confidence..

Check Stock