ReviewsMobile Antennas

Firestik 'ORIGINAL' 5' ANTENNA (BLUE)

  • [8.8inch Heavy Duty Magnetic Mount Base] Base Diameter: 90mm/3.5inch *3.
  • [SO239 Antenna Connection] For CB/HF/VHF/UHF PL-259(UHF Male) mobile antennas.
  • [5M(16.4ft) RG58 Coaxial Cable] Durable low loss coax cable, PL259 Plug, Compatible For most mobile Ham radios, use adapters to make it work on HT...
  • [Soft rubber on magnets]The magnetic Base is composed of a magnet and rubber,Safe and durable,scratch-resistance.
  • Works best on a flat metal surface, Will not work on aluminum or titanium or plastic..
Check Stock

Diamond Original SG7500A Dualband Mobile Antenna

  • The Diamond SG7500A is a 2 meter and 440 MHz (70 cm) mobile antenna. It is a 1/2 wave on 2 meters providing 3.5 dBi gain and a 2 x 5/8 wave on 440 providing 6.0 dB gain.
  • This antenna can handle up to 150 watts. VSWR: 1:1.5..
  • This antenna is approximately 41 inches (1.1 m) high. The antenna is black and silver. The connector type is UHF (for PO mount)..
  • This antenna does not include the mount or coax..
  • One of Diamond Antenna's Supergainer Premium mobile antennas..
Check Stock

NRadio WiFi Router,Portable AC1200 Dual Band Unlocked 4G LTE Modem Router with SIM Card Slot,Mini WiFi Mobile Hotspot for Travel Vacation Rentals Camping Gathering.

  • Built-in TF card storage expansion: Our products support TF card high-speed storage expansion and provide local small server function, which allows for high-speed uploading and downloading. NOTE: No built-in power supply, package includes power adapter, please use the adapter to provide power..
  • Built-in 6 antennas: C2000 has professional built-in Wi-Fi antennas and high gain 4G antennas to improve the signal quality of 4G LTE and Wi-Fi, which is good for establishing Wi-Fi connections from long distances.The wireless router is slim and compact, light and easy to carry, and will be a perfect accessory to take with when traveling..
Check Stock

MIMO 4x4 Panel External Antenna Kit for 4G LTE/5G Hotspots & Routers (Full kit)

  • SAY GOODBYE TO LOW QUALITY VIDEO CALLS - The 4x4 MIMO Panel Antenna Kit by Waveform uses a Cross polarized panel antenna with up to 11 dB of gain over 600-6000 MHz to give your LTE modem or hotspot the speed it deserves..
  • FOUR ANTENNAS FOR MAXIMUM SIGNAL IMPROVEMENT - Using a 4x4 MIMO enabled router and antennas gives you much more signal being sent and received into the device rather than a single channel, or even a standard 2x2 MIMO configuration..
  • BUY OUR KIT TO CONNECT TO EVERYTHING - Our three pack of adapters helps you connect to all major models of LTE routers, including the T-Mobile 5G gateway without any additional purchases!.
  • NOT JUST AN ANTENNA! - Purchasing this antenna kit gives you access to Waveform’s support team for the lifetime of the product. We’re available by text or phone call during regular business hours 7 days a week. Whether you’ve had this antenna installed for years or just purchased it, you’ll have a team of support specialists that you can rely on for assistance. We believe our products will work 100% of the time given the proper conditions, and are happy to get your antenna optimized!!.
  • ROUTERS SUPPORTED - Mofi 5500 T-Mobile home internet units (Nokia and Arcadyan Models) Cradlepoint E300-18B, any many more!.
Check Stock

HYS Dual-Band NMO 20 inch Antenna VHF 144 & UHF 430 MHz Antennas for Motorola Kenwood Icom Vertex Blackbox HYT Hytera V/U Mobile Radios

  • 144/430Mhz NMO Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios.
  • HYS antennas are individually Tested to insure proper compatibility with your Radio and Frequencies! HYS antennas are dependable, accurate, reliable and affordable.
Check Stock

HYS TCJ-N1 3/8 to 3/4 Hole Mount with NMO Bracket L Shape Fender Mount 13 /About 4m RG-58 Coax Cable NMO to PL259 for All VHF/UHF/CB Radio NMO Antenna

  • The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface....
  • L-Bracket Hole Stainless Steel 3/4" NMO Hole Mount, L Bracket for HYS TCJ-N1 Coax NMO Mount Cable Mobile Antennas Car Truck Hood install. Stainless....
  • Recommended HYS NMO Antenna: NMO Antenna TC-HC152V (136-174Mhz,B077HRNLHZ), TC-HC152U (400-470Mhz, B077HXNJ1F ) or HYS SDN1(144/430Mhz, B07P71M8M5),....
  • Prefect for mobile FM transceiver NMO antennas. NMO to PL259 working for so239/uhf female Motorola Yaesu/Vertex Kenwood HYT Icom radio, the clip need....
  • This is a high quality, low profile base mount that does the job very well. 13 feet NMO cable connected easily with the antenna and there is plenty of....
Check Stock

Super Antenna TH1 Thumb Screw for MP1 Antenna

  • THIS IS: The model TH1 Thumb Screw for the Super Antenna MP1 Antenna. It holds the SuperSlider coil locked in position for mobile operation..
  • COMPATIBILITY: This TH1 ThumbScrew fits all models of MP1 Super Antennas (old and new versions)..
  • THREAD SIZE: 1/4"-20. THREAD LENGTH: 0.25" (a quarter inch). SCREW MATERIAL: Nylon. INCLUDES RUBBER WASHER..
  • ENGINEERING: Each black polymer bat handle thumbscrew is engineered from 2 different component parts, providing a smooth non-destructive nylon screw and low profile tough black polymer handle that fits flat to the body of the SuperSlider. It is also called a wingnut or plastic wing-screw. WEIGHT: 0.1 ounce..
  • DIRECT REPLACEMENT FOR MP1: Series Super Antenna MP1 antennas, SuperStick, SuperWhip, SuperSlider. SPARE PART for MP1 series. NOTE: THIS IS NOT AN ANTENNA, THIS IS A THUMB SCREW..
Check Stock

Super Antenna MR1710 SuperWire Radial Set for HF Vertical Antennas 17m 15m 12m 11m 10m Bands ham Radio MP1 Ground Plane

  • SPECIFICATIONS: BANDS: Pre-tuned to 17 meters (18MHz), 15 meters (21MHz), 12 meters (24MHz), 10 meters (28MHz-29MHz). FREQUENCY RANGE: Covers 16.5 MHz to 30 MHz continuous. Also covers WARC bands, CAP, MARS, Marine, CB (26MHz-27MHz), and HF bands (when used with MP1 antenna system or similar vertical antennas). GAIN: +4.5dB over typical ground rod..
  • COMPATIBILITY: Fully compatible with all Super Antenna MP1 Antennas and Equipment. Attaches by included push-on connector to Super Antenna mounts (mount not included, sold separately). Deploys in one minute by one person with no tools needed. Compatible with most other vertical antennas and ground planes. Includes spare mating connector for use with other types of antennas..
  • SIZE: Packs down to a 6″x4″ (15x10cm) compact roll for portability. Extends and fans out to 4 full size quarter-wave wires (1 wire for 17m band, 1 wire for 15m band, 1 wire for 12m/11m band, 1 wire for 10m band). Max wire length: 13 feet (4m). CONNECTOR: Standard push-on spade lug 1/4-inch (6mm) female and #8 Screw ring terminal with screw included. WIRE: Proprietary SuperWire 18AWG 41-Strand PTFE Stealth. LENGTH: Max wire length: 13 feet (4m)..
  • WEIGHT: 5 ounces (133grams). POWER RATING: 500W SSB, 300W CW/DATA. COLOR: ....
Check Stock

Super Antenna MR8075 SuperWire Radial Set 80m-75meter for HF Vertical Antennas 3.5MHz Band ham Radio MP1 Counterpoise Ground Plane

  • ...ems for Ham Radio. It is for transmitting and receiving on HF radio frequencies..
  • SPECIFICATIONS: BANDS: Pre-tuned to the 80 meter or 75 meter (3.5 to 4 MHz) ham band. FREQUENCY RANGE: Covers 3.4 to 4.2 MHz. Also covers CAP, MARS, Marine, shortwave, and HF bands (when used with MP1 antenna system or similar vertical antennas). GAIN: +4.5dB over a typical ground rod..
  • COMPATIBILITY: Fully compatible with all Super Antenna MP1 Antennas and Equipment. Attaches by included push-on connector to Super Antenna mounts (mount not included, sold separately). Deploys in one minute by one person with no tools needed. Compatible with most other vertical antennas and ground planes. Includes spare mating connector for use with other types of antennas..
  • SIZE: Packs down to a 10"x4" (25x10cm) compact roll for portability. Extends and fans out to a full size quarter-wave wire. WIRE: Made of one highly flexible SuperWire 18AWG multi-strand Stealth Wire. LENGTH: Max wire length: 65 feet (19.8m). CONNECTOR: Standard push-on connector 1/4-inch (6mm) female. An extra #8 Screw ring terminal with screw is included. The wire can be cut to a shorter length by the user..
  • WEIGHT: 6 ounces (177grams). POWER RATING: 500W SSB, 300W CW/DATA. COLOR: Stealth Black. WEATHERPROOF: Submersib....
Check Stock

NETGEAR Smart WiFi Router with Dual Band Gigabit for Amazon Echo/Alexa - AC1750 (R6400-100NAS)

  • Compatible with Amazon Echo/Alexa – Control your home network using voice commands..
  • AC1750 WiFi—450+1300 Mbps speeds and high-power external antennas.
  • Dual band—Reduces interference for better connections to more WiFi devices..
  • Advanced QoS—Optimized for smooth HD streaming and gaming.System Requirements:Microsoft Windows 7, 8, 10, Vista, XP, 2000, Mac OS, UNIX, or Linux.
  • Beamforming+ improves range & performance plus High powered amplifiers & antennas to extend your WiFi coverage.
  • Parental Controls - Web filtering for all your connected devices.
  • One (1) USB 2.0 port. Five (5) 10/100/1000 Mbps—(1 WAN & 4 LAN) Gigabit Ethernet ports.
  • Nighthawk App - Easily setup your router. Manage Internet access by pausing and resuming internet instantly. Run a speed test. All from your mobile device!.
Check Stock

NETGEAR Smart WiFi Router with Dual Band Gigabit for Amazon Echo/Alexa - AC1750, R6400-100NAS (Renewed)

  • Netgear Certified Refurbished product is manufacturer refurbished to work and look as new with 90 Day Warranty and email support. All accessories are included with limited documentation and additional information online..
  • AC1750 WiFi—450+1300 Mbps speeds and high-power external antennas. Beamforming+ improves range & performance plus High powered amplifiers & antennas to extend your Wi-Fi coverage.
  • Dual band—Reduces interference for better connections to more WiFi devices. Advanced QoS—Optimized for smooth HD streaming and gaming..
  • Get up and running in minutes using your mobile device with the NETGEAR Up app..
  • Netgear Refurbished product may have a removed serial number. You will need to state the product is refurbished (state the full part number) if contacting customer support..
Check Stock