ReviewsModbus Protocol

Leviton 800-5372-8K 30 Amp Flush Mount Dryer Receptacle

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Surecom SW-102HF 1.5-70MHz V.S.W.R. & Power Meter

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Perytech Logic Analyzer PLA-32128-200MS/s, 32 Channel, 128K Memory per Channel

  • Hardware Function: Data Filter, Noise Filter, Width Trig, Trig Delay.
  • Software Function: Bus Decode, Packet List, Bus Data Export, Bus Packet Trig, Move Synchronously, Bus Analog Display.
  • Bus Decode: I2C, SPI, UART, I2S, PS2, 1-Wire, USB 1.1, S/PDIF, SD, CAN Bus, Lin Bus, 3-Wire, Microwire, SSI, Miller, Manchester, SM Bus, Modbus.
Check Stock

DAE V-75 Vertical Water Meter, 3/4” NPT Couplings, Measuring in Gallons

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Cudy N300 WiFi Unlocked 4G LTE Modem Router with SIM Card Slot, 300Mbps WiFi, LTE Cat4, EC25-AFX Qualcomm Chipset, 5dBi High Gain Antennas, FDD, DDNS, VPN, Cloudflare, Plug and Play, LT400

  • ...des Internet Access of Wired Ethernet, WiFi (802.11b/g/n, AP and Client), and Cellular (4G/3G), it is ideal to work as a main or backup internet. Support VPN client mode (GRE, PPTP, L2TP, IPSec, EOIP, N2N, OpenVPN), Qos, DMZ, Firewall, Port Forwards, NAT, Load Balancing, DDNS, SNMP, Serial RS232 DTU, Modbus RTU/TCP protocol. It is ideal for a variety of IoT M2M scenarios and offers a high-quality networking solution for unattended sites..
  • 【Wide Applications】: This router modem is easy to deploy, cost & time saving, reliable works day and night 24/7 internet access. It is widely used for RVs, remote camera systems, holiday cottages, buses, vehicles, trucks, industrial automation, vending machine, digital signage, smart grid, construction sites, and any other places that require a network. It can also be used as a reliable failover and backup network for the wired network in retail stores, gas stations, warehouses, etc..
  • 【Easy To Use】: QX210 cellular router is an all-in-one solution that includes a router, ethernet cable, antenna, power adapter, user manual, and SIM card holder. Screw holes on the sides for wall mounting make it easy to place on a desktop or mount on the wall. SIM card holders allow you to insert the different sizes of SIM cards.....
Check Stock

Eletechsup 3 in 1 8ch Input/Output Digital Switch TTL LvTTL CMOS RS485 IO Control Module Modbus Rtu Board for PLC Relay (with Terminal, 4)

  • 8 bit DigitalTTL LvTTL CMOS Input/Output.
Check Stock

2.2KW 3HP Spindle Motor and VFD Set Air Cooled Er20 CNC Spindle with Matching Variable Frequency Drive Inverter 220V

  • 2.2kw Air -cooled Motor Spindle and Matching Inverter.
  • 2200kw Air -cooling High Speed High Precision Spindle.
  • RS485 communication port,adopting standard international MODBUS main circuit control 1.5KW 2HP VFD.
Check Stock

2.2KW 3HP Spindle Motor and VFD Set Water Cooled Er20 Collet Chuck CNC Spindle with Matching Variable Frequency Drive Inverter 220V

  • 2.2kw Water-cooled Motor Spindle and Matching Inverter.
  • Four bearing in our spindle motor (2pcs 7005+2pcs7002).
  • 2.2kw Water-cooling High Speed High Precision Spindle.
  • RS485 communication port,adopting standard international MODBUS main circuit control 1.5KW 2HP VFD.
Check Stock

Leviton 1K240-1SW Series 1000 120/240V 100A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

Leviton 1K240-2SW Series 1000 120/240V 200A 1P3W Indoor Kit with 2 Solid Core CTs

  • Certified to all applicable standards of ANSI C12.1.
  • Equipped with both Isolated Pulse Output and RS-485 Serial Port (Modbus Native) standard for easy interface with most AMR and BAS systems.
  • Utilizes revenue grade 0.3 accuracy class 0.1A secondary solid core current transformers (CTs) that conform to all applicable ANSI requirements or 1-Percent accuracy split-core CTs.
  • Up to three sets of CTs per phase can be paralleled per meter.
Check Stock

AOICRIE 2PCS Vk-172 USB Dongle GPS Module G-Mouse Glonass Navigation, Support Windows 10/8/7/vista/XP/CE Andorid Linux for Raspberry Pi (White)

  • ➤ NOTE: The default output is the product GPS protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data It does not support USB 3.0.
  • ➤Works with Windows XP, 7, 8 or 10, Andorid Linux system, for Raspberry PI and EMGRAND Car Google Earth.
  • ➤Plugged it into linux machine, detected as ttyACM0. No additional drivers or configuration required.
  • ➤The default output is the product GPS protocol data. You can test the software or serial commands to modify switch PS / GLONASS protocol data.
Check Stock