ReviewsMolded Bushings

Lisle 99102 Green Neon Low Profile Plastic Creeper

  • COMFORTABLE – Ergonomic, body-fitting shape was developed through testing on many body types to provide optimum comfort for daily use and includes a lumbar support. Padded headrest keeps you in a working position and is easily replaceable..
  • DURABLE – Special molding process bonds the top and bottom permanently together by creating ribs that make the creeper very strong. The impact resistant, blow molded body is made from one piece of high-density polyethylene plastic and is light weight at only 11.5 lbs. The handles located on 3 sides make it easy to hang, carry or move..
  • POP-IN ROLLERS – Six 2 inch ball bearing swivel rollers pop in and out for easy replacement. Urethane wheels are corrosion resistant and are inserted into metal bushings which are firmly molded into the creeper body..
  • LOW PROFILE – Unique design provides 7/8 inch floor clearance to clear air hoses, cords, and other obstructions..
  • 300 LBS. CAPACITY – Our plastic creepers feature 300 lbs. capacity with a total length of 38 inches, width of 17.5 inches and height of 4 inches..
  • EASY TO CLEAN – Surface is resistant to solvents, greases and fuels..
Check Stock

Kettler Milano Weatherproof Indoor/Outdoor Foosball/Soccer Game Table

  • High speed glass playing field with steel telescopic rods and anti-rust chromium plating.
  • large powder coated steel legs with floor levelers.
  • Unbreakable players molded (pre-attached) on the rods.
  • Nylon bushings for smooth high speed action and reduced wear and tear.
  • Includes five cork and resin foosballs and an all-weather cover to protect your table.
  • Assembled Dimensions: 52”(L) x 46”(W) x 35”(H).
Check Stock

Kryptonics Original Torpedo 22.5 Inch Complete Skateboard - Sky-Cats

  • COMPLETE SKATEBOARD: 22.5 Inch skateboard with a durable, custom-molded polypropelene deck.
  • DESIGN MINDED: Features high impact and flex deck with grip pattern and integrated rear grip tape for stability and traction without sacrificing fun....
  • SMOOTH RIDE: 62mm x 51mm poured polyurethane wheels and carbon steel ABEC-5 bearings deliver a smooth ride on any surface!.
  • DURABLE: Retro 3.25 inch aluminum cruiser trucks and polyurethane-injected bushings support higher weight and faster speed.
  • AGE AND WEIGHT: Recommended for ages 8 years and older, supports weight up to 110 lbs..
Check Stock

Bushing Ford 2000 3000 4000 Tractors

  • Includes: 6 Pieces of Steering Shaft Bushings as pictured.If you have a loose steering wheel, you may need to use these bushing.if you have to replace your pinion gear and sector gear due to worn teeth then replace these bushings also, these bushings being worn is most likely the cause of the pinion and sector gears wearing out.
  • Steering Shaft Bushings Fits for John Deere lawn mower D100, D105, D110, D120, D130, D140, D150, D160..
  • Steering Shaft Bushings Fits for John Deere lawn mower L100, L102, L105, L108, L110, L111, L115, L118, L120, L125, L130, L135, L145 102, 105, 115, 125, 135, 145, 155C, 190C.
  • Steering Shaft Bushings Fits for John Deere lawn mower 90C X105, X110, X115, X120, X125, X135, X140, X145, X155R, X165.
  • Specification: Steering Shaft Bushings Replace for John deere OE Part Number GX21994.
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks (96A Red)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Dime Bag Hardware Skateboard Truck Rebuild Kit Bushings Washers Pivot Cups for 2 Trucks (88A Blue)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features conical top bushings and cylindrical bottoms bushing, along with pivot cups and cup washers.
  • Package includes a set of 2 top bushings, 2 bottom bushings, 2 pivot cups, and 4 cup washers, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

DASBET 16PCS Blind Inner Bearing Puller Hole Remover Extractor Set Slide Hammer Tool Kit

  • 【Applicable】This inner bearing puller set is designed for loosening and pulling tight bearings and bushings, and fit for all vehicles 8-53MM bore bearing..
  • 【Instructions to operate】: How to use? Firstly insert the correct collet in the bore of the bearing and turn the nut to expand the collet till it is secure within the bearing.
  • Attach the small slide hammer and yank the weight towards the handle to give an extra snap of weight.
  • Repeat action until the bearing or bushing has been removed.
  • U-shaped bearing seal puller can be used by threading the bushing puller onto the collet and tightening the nut to slowly pull the bearing out of place..
  • 【Usage】This slide bearing removal tool is designed to quickly finish the job without damaging the removed parts or the tool. This small bearing puller tool is ideal for professionals and do-it-yourselfers..
  • 【Sturdy Construction】: Constructed of a strong, durable carbon steel, the bearing extractor tool is sure to pull even the toughest wheel bearing and bushings from tight positions. This blind bearing puller set has a long steel rod and a T-bar handle. The flared ends of the shop hammer weight provides a sturdy grip. The forged hardened steel and rust-proof finish help to increase pulling strength an....
Check Stock

Morris 22328 Snap Bushings, 1.50-Inch, Black, Pack of 10

  • Electrical Bushings Snap Bushings - Snap Bushings for Metal Panels keep wires safe..
  • Snap bushings Eliminate Sharp Edges and insulate your sharp-edged holes in metal panels.
  • Easily Locks into Hole firmly with fingertip pressure.
  • Snap Bushings Protect Electrical Cables, ropes, utility lines passing through metal chassis.
Check Stock

Orangatang Nipples Soft Longboard Skateboard Truck Bushings (Orange, Set of 4)

  • LIVELY LONGBOARD BUSHINGS – The Orangatang Nipples are big and lively bushings designed to help you bounce out of every carve with tons of energy and rebound..
  • LARGE BARREL SHAPE – Slightly wider and taller than most stock truck bushings, the Nipples provide your trucks with more support and more material to squish, making for a highly responsive ride..
  • RANDY THANE – The ideal urethane formula for energetic, high-rebound bushings. Make your trucks come alive!.
  • THE PERFECT SET – Each pack contains two taller bottom bushings (0.66"), two shorter top bushings (0.56"), and four thin and strong flat washers..
  • SOFT – Great for tight turns and maximum response..
Check Stock

Skateboard Longboard Truck Replacement Bushings 4-Pack (for 2 Trucks) - Many Colors and Durometers (88A Blue)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features a conical top bushing and a cylindrical bottom bushing.
  • Package includes a set of 2 top bushings and 2 bottom bushings, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock

Skateboard Longboard Truck Replacement Bushings 4-Pack (for 2 Trucks) - Many Colors and Durometers (96A Red)

  • These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
  • Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
  • Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
  • This bushing kit features a conical top bushing and a cylindrical bottom bushing.
  • Package includes a set of 2 top bushings and 2 bottom bushings, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).
Check Stock