ReviewsMonstrum Tactical Scope

Monstrum Tactical Scope Ring Set for Picatinny/Weaver Rails | 1 inch Diameter | Low Profile

  • 1 inch diameter scope rings for mounting standard 1 inch diameter tube rifle scopes.
  • Mounts to any flat top Picatinny or Weaver rail equipped rifle.
  • High profile in height, 0.185 inches from base of mount to bottom of rings.
  • Light weight 6061 aerospace aluminum construction.
  • All Monstrum Tactical mount and accessory products come with a lifetime guarantee.
Check Stock

Monstrum P330-B Marksman 3X Prism Scope (Black)

  • Next generation prism sight with 3x magnification and 30mm objective lens, for lightning fast target acquisition out to 300 yards.
  • Features a glass prism optical system rather a refracting lens system like traditional scopes, allowing for better optical quality in a much smaller package..
  • Unlike red dots, the reticle is visible with or without illumination, for a clean sight picture regardless of lighting or environment..
  • Brand new single piece machined aluminum design, sturdier and more rigid than ever, guaranteed to hold zero against the strongest of recoil.
  • All Monstrum Tactical Rifle Scope products are backed by a one year warranty..
Check Stock

Monstrum Blackbird 3X Prism Scope | Black

  • With a glass prism optic system the Monstrum Blackbird gives you true 3x magnification with crisper optics in a smaller package than traditional refracting lens rifle scopes.
  • The etched glass reticle illuminates in both red and green for a clean sight picture regardless of lighting or environment, visible with or without battery powered illumination source.
  • The single piece machined aluminum body is built with fewer moving parts and less points of failure to hold zero against the fiercest of recoil.
  • At 15 ounces with a newly designed lightweight 6061 aluminum scope body, the P332 Raven is out lightest prism scope to date..
  • All Monstrum scopes are backed by a one year warranty..
Check Stock

Monstrum P332 3X Raven Prism Scope | Black

  • With a glass prism optic system the Monstrum P332 Raven gives you true 3x magnification with crisper optics in a smaller package than traditional....
  • The etched glass reticle illuminates in both red and green for a clean sight picture regardless of lighting or environment, visible with or without....
  • The single piece machined aluminum body is built with fewer moving parts and less points of failure to hold zero against the fiercest of recoil.
  • At 15 ounces with a newly designed lightweight 6061 aluminum scope body, the P332 Raven is out lightest prism scope to date..
  • All Monstrum scopes are backed by a two year warranty..
Check Stock

Monstrum Picatinny/Weaver Rail Mount for Marlin 336/1894/1895 Series Lever Action Rifles | 0 MOA

  • Picatinny/Weaver rail mount built specifically for Marlin 336/1894/1895 Series lever action rifles.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Long Action | 20 MOA

  • Picatinny rail mount built specifically for Long Action Remington 700 rifle platforms.
  • Compatible with Long Action Remington 700 models only including: 270 Winchester | 300 Win Mag | 30-06 Springfield | 25-06 Remington | 338 Lapua.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Remington 700 Rifles | Long Action | 0 MOA

  • Picatinny rail mount built specifically for Long Action Remington 700 rifle platforms.
  • Compatible with Long Action Remington 700 models only including: 270 Winchester | 300 Win Mag | 30-06 Springfield | 25-06 Remington | 338 Lapua.
  • Scope mount installs directly to receiver via the factory mounting holes and included set screws with no additional hardware required.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long distances.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Dual Ring Scope Mount Compatible with Ruger 10/22 | 1 Inch Diameter

  • Dedicated dual ring scope mount compatible with the Ruger 10/22 platform.
  • Scope mount installs directly to the Ruger 10/22 receiver via the factory mounting holes and included set screws with no additional hardware required. The mount will not install on platforms other than the Ruger 10/22..
  • 1 inch in diameter for precision mounting of standard 1 inch tube rifle scopes.
  • Precision machined from 6061 grade aluminum, comparable in weight to most scope rings with the added rigidity of a unified one piece mount design.
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Picatinny Rail Mount for Savage Axis/Edge Rifles | 0 MOA | Old Version Pre 9/2021 Models

  • Please note that as of 9/2021, Savage Arms has altered the drill hole pattern on newly manufactured Savage Axis rifles. Check the serial number on....
  • Picatinny rail mount built specifically for Savage Axis/Axis II/Edge rifle platforms.
  • Allows for the mounting of Picatinny or Weaver standard scope rings, scope mounts, red dots, or other optics.
  • Available in two styles - a 0 MOA mount for zeroing your scope at short to mid range distances and a 20 MOA mount for zeroing your scope at long....
  • All Monstrum scope mounts and accessories come with a lifetime guarantee.
Check Stock

Monstrum Rifle Scope Throw Lever | 46 mm Diameter | Standard

  • Throw Lever built for attachment to variable power rifle scopes allowing for smooth and controlled adjustment of your scope magnification.
  • Available in three sizes - 43 mm, 44 mm, and 46 mm diameter - for compatibility across most scope models and sizes.
  • Available in notched or standard versions for magnification rings of different form factors.. Notched versions have a concave slot inside the lever to accommodate magnification rings with an integrated throw lever. Standard versions have a protruding wedge to secure more tightly to grooved magnification rings..
  • Installs securely around the scope magnification ring. Please refer to the measurement instructions before purchasing to ensure a proper fit..
  • All Monstrum scope accessories come with a lifetime guarantee..
Check Stock

Monstrum 1-6x24 LPVO Rifle Scope with 45 Degree Offset Red Dot Mount

  • Product Bundle includes the Monstrum 1-6x24 LPVO Rifle Scope, ZS313 Scope Mount, and a set of matching flip-up lens covers.
  • LPVO rifle scope with 1-6x magnification, dial controlled reticle illunimation with multiple brightness intensities, and a glass BDC reticle.
  • 45 degree offset base allows for attachment of a sighting system for use at closer ranges.
  • 2 inches of forward extension allows extra flexibility for optimum eye relief and shooting position.
Check Stock