ReviewsMophorn 80w Laser Engraver

Tool Engraving Machine On Off 01 Industry Sound, Sounds, Effect, Effects [Clean]

  • 【Double Compression Beam Technology to Achieve True 10w Output Power】A10 pro laser cutter and engraver machine, With 50W Machine Power, 10W Laser Module Output Power. Fixed Focus Compressed Spot, spot smaller and the energy more concentrated, and more refined engraving products..
  • 【Support offline engraving】The A10 pro 50W laser engraver is equipped with a terminal control panel, which supports offline engraving, so that you can engrave anywhere, anytime without the restriction of a computer..
  • 【Perfectly compatible system】The laser engraving machine can be compatible with LaserGRBL (free, support Windows) or LightBurn (paid, support Windows, Mac OS and Linux). Engraving file format support: SVG, NC, DXF, BMP, JPG, PNG, etc..
  • 【Assembly is quite easy】Everything is neatly packaged and the smaller pieces are pre-separated into steps that match the instructions.Each assembly step has its own separate package of fittings used in that step. all parts are marked with steps no there is no confusions. The entire setup was about 30 minutes..
  • 【Quality Assurance and After - Sale Service】We have a professional customer service team. We provide the customers a year warranty , parts replacement and permanent technical support. Your concerns are a....
Check Stock

ORTUR Laser Engraver, Laser Master 2 S2 LF, 20W Laser Engraving Cutting Machine, 0.17*0.25mm Fixed-Focus Compressed Spot Eye Protection 5.5W Output Power Laser Cutter for DIY Metal, Wood (390x410mm)

  • ✅Ultra-Fine Compression: Ortur Laser Engraver has 32-bit professional motherboard, which is smarter, faster, more accurate and easier to use. Output power is 1W-1.6W, Engraving area is 390*410mm. Ultra-fine laser focal area is reduced to 0.17*0.25mm, The engraving machine speed can be as high as 5000 mm/min. The laser cutter can cleanly cut 6mm pine board in one pass. The laser cutter comes with an air assist nozzle, use with our air pump could support a higher speed and cut better..
  • ✅Safety protection: Laser Engraver newly upgraded Safety protection. 1. There is a G-sensor on the motherboard, When the engraving machine is displaced or tilted, it will automatically stop the laser.
  • 2. If your computer system halted or USB cable disconnected, led to that the laser engraver stops moving, the laser beam will stop, to prevent fire. 3. The engraving machine is turned on, but there is no movement for a long time, the laser will be turned off automatically..
  • ✅New eye protection design: The laser engraving machine with newest panoramic filter glass protective cover plays a very good role in protecting your eyes, filtering 97% of the ultraviolet light to perfectly prote....
Check Stock

Ball Vise Engraving Setting Tool 360°Rotation Professional Ball Vise 30 PCS Attachment Jewelry Engraving Block Tools Standard Block (3inch)

  • ...lity of the machine to cut and 36W is the machine power of the laser machine.
  • Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.08mm ultra-fine compression spot, resulting in detailed and vivid engraving images.
  • All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 Laser engraver more stable with less noise and 3 lifetimes longer than similar products.
  • Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 6mm wood board and a 3mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
  • Wide Compatibility - xTool D1 supports LightBurn and Laserbox Basic (available on mobile devices). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
  • Make Your Creativity a Breeze - xTool D1 5W is the ideal and user-friendly laser engraver for beginners to start off with, like making greeting cards, patterns-engraving, and your personal artwork.
  • Eye Protection Design - The anti-UV filter acrylic on the laser module filters 97% of UV rays to protect your eyes and those around you.
  • Professional Support - We have a professional US technical team and support website to solve all your problems within 24 hours.
Check Stock

LaserPecker L1 Laser Engraver, Mini Engraving Machine Portable Laser Etcher, Compressed Spot High Precision Grabadora Laser with Protective Goggles - Black

  • The Most Useful Mini Laser Engraver: Do you want to create inspiration anytime at home? Or want to make exclusive gifts for your friends and family during the holiday season? Or want to customize your logo in small batches? LaserPecker L1 Laser Engraver meet your needs!.
  • LaserPecker L1 Laser Engraver: 0.3mm Compressed Spot, engraving range: 3.9″*3.9″. Focal length: 7.5″(the distance from laser unit to the surface of engraved item). Support power supply through 5V 2A mobile power supply. COULD ENGRAVEING: Wood, Kraft paper, Leather, Fruit, Felt etc. COULDN’T ENGRAVEING: Metal, Glass, plastic, stone..
  • Compact Design: LaserPecker L1 Engraving Machine is very small size, only 2.6″ * 2.4″ * 2.1″, Weight 6 oz, can be mastered in one hand, it is a real handheld laser engraving machine. Perfect for entry-level creators, you can do a lot of inspiration without expensive prices and taking up less space..
  • Durable and Safe: Laser etching machine with high quality 1.6W laser head make durablity, better stability and long working time. Multiple safety features such as Working warning alert, Displacement automatically stops when engraving, Overheat shutdown, Enter password before work will keep you safe from accidents. Safe Certification: CE, FCC, FDA, R....
Check Stock

ATEZR P20 Plus 120W Laser Engraver with KA Air Assist, 20W Laser Power Laser Cutter, Laser Engraver and Cutter Machine for Wood and Metal, Large Working Area 17”*17”-Grey

  • - ATEZR P20 PLUS Laser Cutter Machine with KA Air Assist, which is a laser cutter and engraving machine with 120W machine power and 20-24W laser power. With an ultra-fine compressed spot down to as small as 0.06 x 0.08mm, Atezr laser cutter and engraver machine is capable of cutting 15mm paulownia wood and 10mm acrylic in one pass, as well as up to 25mm paulownia wood, 40mm acrylic, and 0.05mm steel sheet..
  • & - Achieve high efficiency and accuracy with ATEZR P20 Plus laser engraver and cutter machine, which has a unique industrial design and a sturdy frame made of high-density Aluminum Alloy. With motion stability under high-speed up to 24,800mm/min, Atezr laser engraver for wood and metal saves 40%-80% time compared to 10W machines. The working area of the engraving and cutting machine has been expanded to a large range of 17x17 inches to meet your various creation needs..
  • - - Stay safe and comfortable while using ATEZR P20 Plus laser cutting machine, equipped with a 32-bit motherboard and a red emergency button that allows you to stop the operation at any time. There are also 2 limit switches installed on the X-axis and Y-axis to locate the laser module and....
Check Stock

USB Rechargable Engraving Machines With 35bits,Mini Electric Engraver Etching Pen Cordless Rotary Tools Engraved Jewelry Glass Stone Metal Plastic Wood Resin

  • ...sheets, 1*rubber mat, 2*wood round slices, 2*stone coaster, 1*phone holder, 50*wooden cube, 50*perforated wood pieces, 5*aluminum sheet, 6*pet tags, 2*pendant tag, 2*pine wood column bar.
  • HIGH-QUALITY MATERIALS: Every material we provide to customers is carefully selected by us. High-quality materials can get better engraver works. We provide the suggested processing parameters for each engraving material to help you quickly get the desired results. It's suitable for laser engraving machine lovers, DIY enthusiasts, and creative crafters..
  • REALIZE YOUR UNLIMITED CREATIVITY: Make cool personalized business cards with the metal business card. Use Pine Cube to do colored puzzles. The laser engraving rubber mat can be made for stamps or rubbing plates. You can use your laser cutter and the material pack to bring your wish list items to life - home decoration, wood items, and more..
  • DIY CREATION: Using the laser engraving material box, which is very suitable for you to customize special gifts for your family, friends, lovers, clients, pets, etc. In addition to gifts, you can also customize holiday decorations for your family, studio, shop, and some festivals, adding Festive atmosphere and fun..
  • APPLICABLE TO ALL LASER ENGRAVER MACHINES: Laser engraver tool kit....
Check Stock

xTool D1 Laser Engraver, 5W Ultra Accurate Laser Engraving Machine, 36W DIY Laser Cutter Support LightBurn, Laser Engraver for Wood and Metal, 17'' x 16''

  • ...lity of the machine to cut and 36W is the machine power of the laser machine.
  • Higher Accuracy - xTool D1 laser cutter adopts a 0.08mm*0.08mm ultra-fine compression spot, resulting in detailed and vivid engraving images.
  • All-Metal Made - The all-steel wheel, shaft, and enclosed synchronous belt make the xTool D1 Laser engraver more stable with less noise and 3 lifetimes longer than similar products.
  • Fulfill Your Imagination with One Pass - xTool D1 works well on cutting a 6mm wood board and a 3mm black acrylic in one pass, smoothly cutting surface with fewer burn marks.
  • Wide Compatibility - xTool D1 supports LightBurn and Laserbox Basic (available on mobile devices). You can transfer data via Wi-Fi, USB cable, and TF card to use the laser engraver.
  • Make Your Creativity a Breeze - xTool D1 5W is the ideal and user-friendly laser engraver for beginners to start off with, like making greeting cards, patterns-engraving, and your personal artwork.
  • Eye Protection Design - The anti-UV filter acrylic on the laser module filters 97% of UV rays to protect your eyes and those around you.
  • Professional Support - We have a professional US technical team and support website to solve all your problems within 24 hours.
Check Stock

SCULPFUN Laser Engraver Enclosure with Vent, Fireproof Laser Cutter Protective Cover, Smoke & Odor Insulation, Noise Reduction, Eye Protection, Suitable for Most Laser Engraving Machine, 700x700x460mm

  • 【High Strength Fireproof Material】The laser engraver enclosure is made of high-quality double-sided silicone coated Plexiglas fiber that can withstand temperatures up to 1832°F (1000°C) and is resistant to instantaneous high temperatures. Please watch the video, we tested with fire for a few minutes without any problem..
  • 【Large Size & Wide Applicability】Extra large space for laser engraving machine protection cover (700*700*460mm/27.5*27.5*18in). Higher than other laser enclosure, can be used for laser rotary roller engraving taller objects. Compatible with most engraving machines on the market, such as fiber/co2/k40 laser engraver, as long as the size is within this range..
  • 【Eyes Protection & Slanted Viewing Design】Laser cutter enclosure viewing window size 53x60mm (20.8*23.6inch), made of double-layer dark PVC material, which can reduce the blue light produced by laser engraving and protect your eyes. The beveled design of the laser enclosure allows you to better observe the machine operation, giving you a good laser engraving experience..
  • 【Noise Reduction, Smoke & Odor Insulation】The laser enclosure isolates 99% of dust particles, smoke, odors, and noise during the cutting and engraving process. Ensuring your safe and healthy laser ....
Check Stock

xTool D1 36w Higher Accuracy Laser Engraver with Material Box, 5w-7.5w Laser Cutter and Engraver Machine, Support LightBurn, Laser Engraver for Wood and Metal, Vinyl, Acrylic, Paper(17'x15.98')

  • 【Finer Details by 0.08*0.08mm Ultra-fine Compression Spot】xTools D1 is the Best DIY laser cutter and engraver machine for beginners/business starter/ hobbyists/designers/home-makers/professionals. It adopts the latest high power 5-7.5W laser module with 0.08mm ultra-fine compressed spot, cutting speed up to 10000mm/min, can cut 8mm wood board and 3mm acrylic in one pass, directly engrave uncoated stainless steel.
  • 【Higher Accuracy Cutter and Engraver Machine】The all-steel wheel and shaft and synchronous belt enable motion accuracy of up to 0.01 mm and repeatable positioning accuracy of less than 0.02 mm, allowing the xTool D1 laser engraving machine to engrave and cut all details of design drawings 1-to-1 with high silence throughout. It maintains a perfect engraving effect even after long times use.
  • 【All in One Kit】These xTool D1 kit comes with the xTool D1 laser cutter and engraver machine, rotary attachment and laser material Box. With a rotary attachment, xTool D1 can engrave diameter cylinders as small as 3mm. The laser material box include 10 kinds of popular materials, including metal, wood, rubber, etc. You can start your creation quickly with xTool D1 Rotary attachment and Materail kit.
  • 【Wide Compatibility and Multiple Connection W....
Check Stock

Comgrow Z1 Laser Engraver 10W Output Power, 24V Desktop 48W Laser Cutter and Engraving Machine with Eye Protection Compressed Laser Spot 0.08mm, 10000mm/min Diode Laser Cutting for Metal Wood

  • 【DUAL Y-AXIS MOTOR】: The Y-axis of acrylic engraving machine is extremely smooth and extremely mobile. Not only provides almost unbelievable speed when engraving but also increases the stability and accuracy of the project..
  • 【Extensive software adaptability & Multiple connection methods】：Z1 laser engraver can be compatible with various mature engraving software, LightBurn for experirenced laser user and LaserGRBL for new laser user. LaserGRBL Support Win 7 / Win 8/ Win 10/Win XP,LightBurn supports window /Mac /Linux system.And you can transfer data via Wi-Fi, USB cable, and SD card and use Z1 laser cutter and engraver machine anytime and anywhere..
  • 【SUPPORT EXPANSION】: This device It can be upgraded with Comgrow rotary roller, perfect for engraving tumblers and cylindrical objects! It has a stable design for multiple diameters. Spacing between the two rotary axes ranges from 8mm(0.31in) to 86mm(3.9in). You can engrave angthing you want..
  • 【quality assurance & Easy to use】The Z1 laser engraver can usually be assembled in 10-20 minutes. The new laser head comes with a focusing plate, allowing you to quickly and easily adjust the focus without any tools. In addition, we provide customers with one-year free parts replacement ....
Check Stock

ATOMSTACK Laser Engraver, A5 20W Laser Engraving Cutting Machine CNC, 4.5W-5W Output Power, Upgraded Precise Fixed-Focus Machine, Eye-Protection Design, DIY Laser Marking formWood, Leather, Vinyl

  • Innovative Eye Protection Design: The laser engraver with laser protective cover perfectly protects your eyes when your working Engraving Wood and Metal, filter UV light for 97%. You and the people around can watch laser engraving without wearing goggles. Reduce the cost of your goggles and the inconvenience of wearing goggles..
  • High-Precision & Easy Installation: The laser engraver machine CNC with 20W High-Performance Laser Head. It can not only engrave but also cut 1/8″ of the wood and acrylic. Full-metal structure design, more solid, and the entire structure has been designed for quick assembly, and the assembly can generally be completed within 10-20 minutes..
  • Upgraded Auto Focus Function: No need to adjust the focus before engraving.
  • the new laser focal spot is 50% smaller than other ordinary lasers, new laser combines precision engraving and high energy cutting at the same time. The laser power of the fixed-focus laser is more stable than the zoom laser..
  • Wide Compatibility: The Laser engraver cutter can be compatible with various mature engraving software, such as LaserGRBL, LightBurn(paid), support Win XP / Win 7 / Win 8 / XP / Win 10, and also support MAc system (LightBurn), engraving file format supports NC, BMP, JPG, PNG, DXF, etc..
Check Stock