ReviewsMorse Taper Drill Chuck Adapter

Chicago Latrobe 110X High-Speed Steel Extra Long Length Drill Bit, Black Oxide Finish, Morse Taper Shank, 118 Degree Notched Point, 9/16\ Size

Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit.
High-speed steel (HSS) provides hardness for wear resistance.
Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials.
Self-centering 118-degree notched point penetrates material without a pilot hole more easily than a conventional point, and maintains a sharp cutting edge.
#2 Morse taper shank is made to American Morse Standard dimensions and installs directly into a tool's spindle, sleeve, or socket of the same taper for a tight, self-holding fit.

Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit.
High-speed steel (HSS) provides hardness for wear resistance.
Black oxide finish reduces wear while promoting chip and coolant flow on ferrous materials.
Self-centering 118-degree notched point penetrates material without a pilot hole more easily than a conventional point, and maintains a sharp cutting edge.
#2 Morse taper shank is made to American Morse Standard dimensions and installs directly into a tool's spindle, sleeve, or socket of the same taper for a tight, self-holding fit.

MATERIAL: The taper drill sleeve is made of high-quality high-speed steel, which is hard and not easy to break, bringing you a better experience.
SPECIFICATIONS: Accuracy: 0.015mm, Hardness: 50 HRC.
QUENCHING: The product has been quenched as a whole, which has higher hardness and wear resistance.
APPLICATION: The drill sleeve is specially designed for the use of Morse taper shank and taper shank drill bits.
QUALITY INSPECTION: Each product has been strictly tested before leaving the factory, and rejects defective products.

TRANSFORMS IMPACT DRIVERS: This mini drill chuck is an easy way to adapt or convert cordless impact drivers, cordless power tools, and wrenches to do....
EASY ON AND OFF: Socket drive chuck adapter has a 3-jaw chuck securely holds round-shank drill bits and includes 1/2 inch adapter to quickly go from....
DRILL CHUCK EXTENSION: This chuck for your impact drill extends the reach of your impact drill or driver. Gives you the freedom of one-handed drilling....
HEX SHANK DRILL: Drill chuck for impact driver has a standard 1/4" hex drive chuck is an excellent fit to power tools and is constructed of Cr-V metal....
FITS A WIDE RANGE OF BITS: Hand drill adapter is the ideal capacity and clamping range for all drill bit sizes from 1/16” to 3/8” drill bits to....

Taper Shank Core Drills 4 Flute - High Speed Steel.
Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.

Taper Shank Core Drills 4 Flute - High Speed Steel.
Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.

Taper Shank Core Drills 4 Flute - High Speed Steel.
Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.

Taper Shank Core Drills 4 Flute - High Speed Steel.
Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.

【Strong Material】This chuck drill adapter is made of ABS + Aluminum + Steel, tough and durable, lightweight and easy to carry..
【Powerful Function】The drill chuck of the tool adopts standard 0.8mm-10mm drill bit. 1500RPM and 25N·m torque - This right angle adapter drill can withstand a maximum torque of 25N·m and a maximum speed of 1500 rpm..
【Easy to Use】 This angle head screwdriver bit is easy to install and use, the screwdriver handle is very stable..
【Extension Chuck】90° extension right angle chuck, it can work in hard to reach places, it is a practical accessory..
【Universal Application】The 8mm hex shank of the elbow drill chuck is suitable for most standard drills: hand drills, electric drills, polishing equipment, etc..

MAG DRILL CHUCK ADAPTER: 3/4" Weldon shank (Industry Standard) to 1/2" Jacobs style adapter.
ADJUSTABLE: Jacobs drill press chuck converter can be adjusted for use with up to 1/2" dia. twist drill bits.
VERSATILE: For use with magnetic drills and drill presses with 3/4" weldon / 2 Flat tool holder. Also for use on variable speed and reversible drills.
HEAVY DUTY: THE IBC 17 weldon chuck accessory is high quality, made In Germany and built to handle the most demanding drilling applications..
Includes: (1) 3/4" Weldon Arbor (1) 1/2" drill Jacobs tool holder (1) Chuck key.

Size: #2 Morse Taper Cone is 2-1/2" by 1-11/16" overall diameter.
Application: Precision ball bearings for smooth, balanced turning. Ideal for many turn-between-center woodturning projects.
Note: Place rear taper end on the tail stock and the opposite end in the center drill hole.
We recommend applying lubrication oil to bearing prior to....
Sturdy: Alloy steel shaft construction for ultimate strength and longevity.
Packing： Shipped in Protective case for storage.