ReviewsMorse Taper Shank Expansion Chucking Reamer

Drill Bits & Plowshares: The History of Farmers Royalty Company

  • Taper Shank Core Drills 4 Flute - High Speed Steel.
  • Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
  • Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.
Check Stock

Drillbit Taylor (Extended Survival Edition)

  • Taper Shank Core Drills 4 Flute - High Speed Steel.
  • Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
  • Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.
Check Stock

Drill Bits (feat. David Slusser)

  • Taper Shank Core Drills 4 Flute - High Speed Steel.
  • Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
  • Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.
Check Stock

This Is Not A Drill: An Extinction Rebellion Handbook

  • Taper Shank Core Drills 4 Flute - High Speed Steel.
  • Size: 1 27/32 - Morse Taper Shank: 5 - Flute Length: 10 1/8 - OAL: 17 1/8.
  • Used to enlarge cored, drilled, or punched holes. They will not drill solid metal.
Check Stock

3/16

  • Clamping Range: 3/16" - 3/4". (PLEASE NOTE THE DRAWS DO NOT CLOSE ENTIRELY TO ZERO RATHER IT CLOSE TO 3/16").
  • Shank Size: 2MT (Morse Taper #2) PLEASE NOTE THE TAPER IS MT2 (SPINDLE HOLE DIA OF DRILL PRESS SHALL BE 0.70'. ).
Check Stock

uxcell Chucking Reamer Set Lathe Machine Reamer Straight Flute Milling Cutter High Speed Steel H7 Tolerance (3mm 4mm 5mm 6mm 7mm 8mm 9mm 10mm 11mm 12mm) 10pcs

  • 【High working efficiency】: This chucking machine reamer set has sharp cutting-edge, high efficiency cutting ability, high accuracy, so your work will become easier under the use of this tools set. Also, this set has a long-term using service life.
  • 【High quality materials】: This set of cutter milling reamer is made of high quality and high speed steel materials, so these reamer cutters have high hardness.
  • 【Specific and professional use】: This steel milling cutting tool set is designed for reaming to mold processing and handicraft processing.
  • 【Wide using range】: This whole chucking reamer set can be widely used for bore machining, installed in drilling machine, milling machine, etc.
  • 【Fine process】: This set of chucking reamer tools' surface has processed by iron, plastic, wood, copper, aluminum and other soft materials.
Check Stock

5/8 Bridge Reamer Bridge/Construction Reamer 1/2 Shank M2 HSS Taper Chucking Reamer Bit Tool for Steel Metal Alloy Wood Plastic Drilling Hole

  • Material: 5/8 bridge reamer is made of high-quality M2 HSS steel, with high toughness, high-temperature resistance, corrosion resistance and long service life. Compared to other commonly used low-grade high-speed steels, M2 has an increased content of tungsten and molybdenum, both key elements for improved durability.
  • Wide Application: HSS bridge reamers can enlarge or align existing holes and are suitable for various materials such as aluminum, brass, bronze, cast iron, copper, iron, metal, nickel, plastic, steel and other structural materials Note: It requires existing holes Or a pilot hole is required.
  • Size Infor: Length of chucking reamer is 6.5 inch.
  • Safe to Use: Designed with helical flutes and safety stops to keep chips away from the operator. The safety collar stops to prevent over-penetration and loss of operator stability.
  • Design: The tapered tip design allows the reamer to fit into unevenly overlapping holes, aligning the bolt holes. The 5/8" bridge reamer is not a drill, it just aligns the reamer with the pre-drilled hole.
Check Stock

3/8\ Expansion Reamer, Carbide Tipped, Straight Shank, 56003, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 5/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

1/2\ Expansion Reamer, Carbide Tipped, Straight Shank, 56005, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 7/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

23/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56012, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 9/16" shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock

29/32\ Expansion Reamer, Carbide Tipped, Straight Shank, 56018, USA Made

  • When the diameter wears down to the low limit, it may be expanded oversize, reground to size and recleared. The expansion screw should never be loosened in an attempt to use the reamer for a size smaller than that to which the tool was originally finish ground. These reamers are inteded to be used for 1 specific diameter, not multiple diameters..
  • 3/4 " shank diameter, For Reaming abrasive material.
  • This is an expansion reamer NOT an adjustable reamer. It can be expanded only and reground..
Check Stock