ReviewsMosfet Car Amplifier

CT Sounds AT-500.1D 700 Watt Class D Competition Mono Amplifier Car Audio

  • Mono amplifier with 500 watts RMS power at 1-ohm load (12.8v).
  • Frequency response: 10Hz to 250Hz (Bass Knob Included).
  • Equipped with 4-way protection circuitry along with a Diode 6A60 for reverse polarity protection.
  • sleep easy at night knowing your car audio amplifier is protected.
  • Built using an advanced PCB board featuring Korean capacitors, high quality transformers and cutting-edge inductors to ensure this car amplifier class d delivers the power you need to destroy the competition in the SPL lanes.
  • Internal wiring features 8AWG OFC cables for enhanced electric current allowing this car amplifier monoblock to deliver louder, cleaner, and more punchy power than other car mono amplifiers in its class.
  • Heavy duty heat sink design, high power MOSFET switching technology, and silicon utilized throughout the internal components will ensure the class d amplifier car audio runs cool for even the most demanding playlists.
Check Stock

Hifonics 4 Channel Car Amplifier – Class A/B Gemini Series Multichannel Amplifier 1400 Watt Car Electronics Audio Subwoofer 2 Ohm Stable Bass Boost MOSFET Power Supply for Speakers Sub Amp

  • Power – This Class A/B 1400 Watt Car Amplifier has a power rating distribution as followed 350x4 @2 Ohms, 175x4 @4 Ohms. The 4 channel amplifier for car speakers also provides a 2-way protection circuitry as a part of its design..
  • Features – The 4 channel bass boost car amplifier has features like - Frequency Response: 10-22KHZ, Bass Boost, Remote Bass Knob, 2-way protection, variable low pass crossover: 40Hz-300Hz, variable high pass crossover: 40Hz-300Hz, subsonic filter:10Hz-40Hz, phase shift:0-180 degree, and ultra-fi mosfet power supply.
  • Class A/B – This multichannel subwoofer car amplifier for car stereo exhibits a Class A/B topology. In the presence of no audio signal, Class A Amplifier has a high amount of current flowing in its output while Class B amplifier has no current flowing..
  • Quality - This Class A/B 4 channel car amplifier exhibits quality frequency response rates and crossover network which places this amp at a prominent place. Durable design and highly efficient performance makes this subwoofer amp for car speakers stand out amongst the others..
  • RCA Ports - The RCA Jacks in this bass boost car amplifier allows you to develop multiple amplifier systems without using any splitter cords. The subwoofer amplifier thus puts you at ease....
Check Stock

Recoil Universal Bass Knob Level Controller with Built-in Digital Voltmeter, Blue LED Display, Remote Gain Control, On/Off Switch, Prevent Damage to Your Audio Equipment

  • Car audio amplifier with 1500 watts RMS power at 1-ohm load (14.4v).
  • Frequency response: 0 to 320 Hz (Bass Knob Included).
  • Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application.
  • but don’t let the size fool you, this 1500 watt amplifier absolutely pounds.
  • Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system.
  • MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists.
  • 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection.
  • sleep easy at night knowing your class d amplifier car audio is protected.
Check Stock

Audiotek AT4000M 1 Channel Monoblock Car Amplifier - 4000 Watts 2 Ohm Stable LED Indicator Bass Knob Included Mosfet Power Supply Great for Subwoofers

  • 1 Channel Monoblock Car Amplifier - 4000 Watts | 2 Ohm Stable.
  • Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
  • Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
  • Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
  • Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check Stock

Audiotek AT1600M 1 Channel Monoblock Car Amplifier - 1600 Watts 2 Ohm Stable LED Indicator Bass Knob Included Mosfet Power Supply Great for Subwoofers

  • 1 Channel Monoblock Car Amplifier - 1600 Watts | 2 Ohm Stable.
  • Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
  • Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
  • Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
  • Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check Stock

Gravity 6000.1D Class D Car Audio Amplifier – 3000 Watts True RMS @ 1 Ohm Max Power at 6000W, 1/2/4 Ohm Stable, Digital, Monoblock, Mosfet Power Supply, Great for Subwoofers

  • Class D Amplifier 3000W RMS @ 1 Ohm, 2200W RMS @ 2 Ohm, 1500W RMS @ 4 Ohm. Bass Knob Included.
  • Small footprint and compact chassis makes this mono amplifier easy to install in any vehicle or car audio application.
  • but don’t let the size fool you, this 6000 watt amplifier absolutely pounds.
  • Engineered to be the most efficient car monoblock amplifier in its class so that you can get the most out of your vehicle’s electrical system.
  • MOSFET pulse width modulated power supply and proprietary heat dissipation design will ensure the amplifier for car subwoofers runs cool for even the most demanding playlists.
  • 4-way protection circuitry features high voltage, low voltage, over current, and high-temperature protection.
  • sleep easy at night knowing your class d amplifier car audio is protected.
Check Stock

Audiotek AT5000S 2 Channel Stereo Car Amplifier - 5000 Watts 2 Ohm Stable LED Indicator Full Range Bass Knob Included Great for Speakers and Subwoofers

  • 2 Channel Stereo Car Amplifier - 5000 Watts | 2 Ohm Stable.
  • Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
  • Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
  • Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
  • Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check Stock

Audiotek AT3500S 2 Channel Stereo Car Amplifier - 3500 Watts 2 Ohm Stable LED Indicator Full Range Bass Knob Included Great for Speakers and Subwoofers

  • 2 Channel Stereo Car Amplifier - 3500 Watts | 2 Ohm Stable.
  • Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
  • Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
  • Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
  • Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check Stock

Audiotek AT1800S 2 Channel Stereo Car Amplifier - 1800 Watts 2 Ohm Stable LED Indicator Full Range Bass Knob Included Great for Speakers and Subwoofers

  • 2 Channel Stereo Car Amplifier - 1800 Watts | 2 Ohm Stable.
  • Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
  • Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
  • Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
  • Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check Stock

Rockville SK510 PACKAGE 10 1200w Loaded K5 Car Subwoofer Enclosure+DB11 Amp

  • Loaded Sub Enclosure Features: Rockville Single 10" K5 1200w Car Subwoofer Pre-loaded In Vented Sub Enclosure, Peak Power Handling: 1200 Watts, Program Power Handling: 600 Watts, CEA Rated RMS Power Handling: 300 Watts.
  • Vent dimensions (inches): 2" x 6.5" x 8", Tuning frequency of enclosure: 35 Hz, 2" 4-Layer Black Aluminum Voice Coils Wound with OFC (100% Copper) Wire.
  • Features of Amplifier: Rockville dB11 1400w/700w RMS 2-Ohm Class-D Mono Car Amplifier and Bass Remote, CEA Compliant Power Ratings.
  • Peak Power Rating: (The amount of power the amplifier can produce for a split second at the loudest part of a song) - 2 Ohm: 1400 Watts x 1 Channel, - 4 Ohm: 880 Watts x 1 Channel, High-Speed MOSFET Power Supply.
  • Features of wire kit:, Rockville RWK81 8 Gauge 2 Channel Car Amplifier Wiring Installation Kit, (1) 17 High Grade Twisted Pair of 100% Copper RCA Cable, 17 8 Gauge Translucent Blue SuperFlex Power Cables, 17 18 Gauge Blue Remote Cable.
Check Stock

Audiotek AT8000M 1 Channel Monoblock Class D Car Amplifier - 8000 Watts 1 Ohm Stable LED Indicator Bass Knob Included Mosfet Power Supply Great for Subwoofers

  • Class D Monoblock Car Amplifier - 8000 Watts | 1 Ohm Stable.
  • Bridgeable MOSFET Amplifier | Tri-mode capable | Heavy-Duty aluminum alloy heat sink.
  • Class A-B Operation | Continuously- Variable low pass crossover: 0 to +18dB | Remote Subwoofer control.
  • Nickel Plated RCA and Speaker level inputs | Remote turn-on/turn-off circuit | MOSFET pulse width modulated power supply.
  • Thermal and Speaker Short protection Circuitry | LED Power and protection indicators.
Check Stock