ReviewsMosfet Tube

BIGTREETECH SKR Mini E3 V2.0 New Upgrade Control Board 32-Bit with TMC2209 UART Driver 3D Printer Parts Cheetah for Creality Ender 3

  • ⭐【Main Control Chip Features】This SKR Mini E3 V2.0 motherboard uses the STM32F103RCT6 main control chip, and its flash memory size is 256K..
  • ⭐【CNC Fan】Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0....
  • ⭐【Hot-bed Mosfet】The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation..
  • ⭐【Upgrade Features】Support BLtouch, filament detection, power-off resume, automatic shutdown, etc ..
  • Increase the distance between the driving....
  • ⭐【After-sales Support】If you encounter any problems, please contact us via Amazon as soon as possible. We have professional technical....
Check Stock

Orange Two Stroke Active Dual-Parametric EQ/Boost Guitar Effects Pedal

  • Tone Control - An extremely powerful active EQ, the TONE control adjusts the high frequencies by giving a +/-15dB boost/cut to those frequencies.
  • Pre Gain Switch - Selects between 3 varying levels of gain for each boost circuit: High -Voiced for heavy breakup/lead tones.
  • Med - Voiced for mild breakup/rhythm tones.
  • Body Control - An extremely powerful active EQ, the BODY control adjusts the low frequencies by giving a +/-15dB boost/cut to those frequencies.
  • Boost Control - sets the overall level of boost available from the PRISM. Think of the BOOST control as a master volume that works in tandem with the PRE GAIN switch to dial in the ratio of gain to boost level.
  • Circuit Select - Selects between the 3 boosts circuits: COLOR - Vintage Silicon Treble Booster Style boost. Perfect for Brian May (Queen) style rhythm and lead tones!.
  • AMP - A very musical sounding MOSFET boost that emulates the tonal response of an overdriven vacuum tube amp!.
  • TRANS - An ultra transparent 18V powered JFET boost circuit. Sounds like you only LOUDER!.
Check Stock

Soundstream AR1.4500D Arachnid Series 4500W Class D Monoblock Amplifier

  • 1-Ohm stable monoblock operation for Max power Bridge 2 monoblocks together for double power! Military grade PCB w/ PWM MOSFET power supply Direct short, thermal, & overload circuit protection High/speaker level & low level/RCA input.
  • Military-Grade PCB with Pulse Width Modulated MOSFET power supply.
  • LED power (green) and protect (red) indicators.
Check Stock

Soundstream AR4.1800 Arachnid Series 1800W Class A/B Full Range Amplifier

  • 2-Ohm stereo & 4-Ohm bridged full range operation Military grade PCB w/ PWM MOSFET power supply Direct short, thermal, & overload circuit protection High/speaker level & low level/RCA input Pre-amp low-level RCA outputs.
  • Military-Grade PCB with Pulse Width Modulated MOSFET power supply.
  • LED power (green) and protect (red) indicators.
Check Stock

Transistor Tester DROK Mosfet Transistor Capacitor Tester Mega328 NPN PNP Transistor Diode Resistor Inductor Capacitance MOS SCR ESR Meter Automatic Checker Detector

  • ✔ WIDE APPLICATION: This multifunctional capacitance meter can be used to test triode, field-effect tube(FET), diode, resistor, capacitor, inductor, MOS, SCR, which is available for various electric transistor testing..
  • ✔ LARGE & CLEAR LCD DIGITAL DISPLAY: This amazing detector adopts 1.8" TFT color LCD screen with high-resolution. Besides, different parameter is shown with different color, convenient and simple for you to check the parameter..
  • ✔ AUTOMATICAL IDENTIFICATION: DROK intelligent transistor checker is able to detect NPN and PNP transistors, N-channel and P-channel MOSFET, diodes, thyristors, resistors, capacitors or other devices automatically..
  • ✔ BATTERY POWERED: This monitor is powered by DC9V battery (not included)..
  • ✔ AUTO SHUT-DOWN FUNCTION: Our advanced electronic transistor tester owns auto shut-down function. There is shutdown countdown displayed on the monitor and the shutdown countdown time can be extended to 40s..
Check Stock

DZS Elec 6pcs XL6009 DC-DC Booster Converter Module 3V-32V to 5V-35V 4A Adjustable Step-up Voltage Regulator 5V 9V 12V 24V Power Supply Module

  • XL6009 DC-DC Adjustable Booster Power Converter Module, High efficiency non-isolated booster module can be used for booster voltage stabilizer power supply, DIY adjustable mobile power supply, booster charger, etc..
  • Input Voltage: 3V-32V, The optimal operating voltage range is 5-32V.
  • Output Voltage: 5V-35V Continuing Adjust (Step-up module, output voltage is higher than input voltage).
  • Input Current: 4A (max) Non-Load 18mA (The higher voltage, the greater no-load current.).
  • The booster power board is equipped with 4A high-efficiency MOSFET switch tube, with the conversion efficiency up to 94%..
  • Ultra high switching frequency 400KHz, the filter capacitance with small capacity can achieve very good effect, smaller ripple and the volume..
Check Stock

Aexit FQD4N60C 600V Transistors 2.6A 2.6ohm N-Channel CMOS Transistors Transitor Mosfet

  • Product Name : N-Channel Transitor Mosfet.
  • Total Size : 9.7 x 6.7 x 2.3mm / 0.38" x 0.26" x 0.09" (L*W*H).
Check Stock

BIGTREETECH SKR Mini E3 V2.0 New Upgrade Control Board 32Bit with TMC2209 UART Driver 3D Printer Parts Cheetah V1.0 for Creality Ender3 with BLTouch Extension Cable Kit

  • ⭐【Main Control Chip Features】This new SKR Mini E3 V2.0 motherboard uses the STM32F103RET6 main control chip, and its flash memory size is 512K..
  • ⭐【CNC Fan】Because the fan on the SKR Mini E3 V2.0 control board is a CNC fan, you need to set the wind speed before using it. (Note: V2.0....
  • ⭐【Hot-bed Mosfet】The hot bed MOS tube uses WSK220N04, low on-resistance, larger heat dissipation area, and reduce heat generation..
  • ⭐【BLTouch V3.1】BLTouch is an auto leveling sensor for 3D Printers based on open-source.Simple, Smart, High-precision.It could work with any....
  • ⭐【After Sales】If you encounter any problems, please contact us via Amazon as soon as possible. We have professional technical after-sales....
Check Stock

ALPINE SWT-S10 1200w 10" Car Subwoofer in Bass Tube Enclosure+Amplifier+Amp Kit

  • ... x 375 Watts RMS) @ 2 ohms 1 x 750 Watts @ 4 ohm Bridged Mono 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. 750 Watts (2 x 375 Watts RMS) @ 2 ohms. 1 x 750 Watts @ 4 ohm Bridged Mono. 500 Watts (2 x 250 Watts RMS @ 4 ohms) < 1% THD. Peak Power: 1500 Watts (2 x 750 @ 2 ohms or 1 x 1500 @ 4 Ohms). High-Speed MOSFET Power Supply. Studio-Grade Bipolar Output Stage Transistors. Fully Adjustable 12dB / Octave Crossover.
  • Low Pass Filter: 50Hz - 250Hz. High Pass Filter: 15Hz - 250Hz. Fully Adjustable 12dB Bass Equalizer with Differential Circuitry. 2-Ohm Stable Stereo. 4-Ohm Mono Bridgeable. Mute and Delay Soft Start System. Full IC-Controlled Protection Circuitry. RCA Preamp Line Output. ELNA Brand Audiophile Capacitors. 8 Volt Preamp Circuitry. Status Mode LED Indicator. High Level Input with Smart Auto Turn-On. Minimum THD at Rated Power: < 0.05%. Frequency Response: 10Hz - 40KHz. Damping Factor: > 200 @ 100Hz.
  • 50 Amp Maxi Fuse. Dimensions: (W x H x L) 8.5" x 1.8" x 13". CEA Compliant Power Ratings: 250 Watts (2 x 125 Watts) at 4 ohms and 1% THD+N. 370 Watts (2 x 185 Watts) at 2 ohms < 1% THD. 1 x 370 Watts bridged @ 4 Ohms < 1% THD. R....
Check Stock

1PACK Transistor Tester,Mosfet Transistor Capacitor Tester, Mega328 NPN PNP Transistor Diode Resistor Inductor Capacitance MOS SCR ESR Meter Automatic Checker Detector(not Included DC9V Battery)

  • LARGE & CLEAR LCD DIGITAL DISPLAY: This amazing detector adopts 1.8" TFT color LCD screen with high-resolution. Besides, different parameter is shown with different color, convenient and simple for you to check the parameter..
  • Our intelligent transistor checker is able to detect NPN and PNP transistors, N-channel and P-channel MOSFET, diodes, thyristors, resistors, capacitors or other devices automatically..
  • WIDE APPLICATION: This multifunctional capacitance meter can be used to test triode, field-effect tube(FET), diode, resistor, capacitor, inductor, MOS, SCR, which is available for various electric transistor testing..
  • Our electronic transistor tester owns auto shut-down function. There is shutdown countdown displayed on the monitor and the shutdown countdown time can be extended to 40s..
  • BATTERY POWERED: This monitor is powered by DC9V battery (not included)..
Check Stock

Power Acoustik OD1-5000D Overdrive Series 5000 Watts Max 1 Ohm Mosfet Power Supply Class D Car Audio Monoblock Amplifier Black

  • 1 OHM STEREO: 1-ohm stable monoblock operation for MAX power.
  • DOUBLE POWER Bridge 2 monoblocks together for double power.
  • MOSFET POWER SUPPLY: Military-grade PCB with PWM MOSFET power supply.
  • OVERLOAD CIRCUIT PROTECTION: Direct short, thermal, and overload circuit protection.
  • SPECIFICATIONS: High/speaker level and low level/RCA input.
  • 4g power wire and 8g speaker wire outputs.
  • Variable 12dB high and low pass crossovers.
Check Stock