ReviewsMotor Ac Current

Xantrex 817-3000 Inverter, Freedom X, 3000W 12V True-Sine

Hardwire or plug directly into the optional 20A GFCI receptacle.
View AC & battery current, % status bar for inverter output on the onboard display.
Extended Surge Rating: Surges to 2X continuous power for 2 seconds for motor loads.
True Sine Wave AC Power: For operation of sensitive and motor loads.
Ignition Control: Feature to turn inverter on/off via a 12 VDC signal and to minimize battery drain by switching the inverter off when the ignition key is turned off.
Wide 10-18 VDC Input Range: Ensures inverter operation on high voltage alternators found on many new vehicle chassis.
Built-in 30A AC Transfer Relay: Senses when outside AC Power is present and transfers the load from the inverter to the source of incoming power (shore or generator)..

Check Stock

CHANS TYC-40 Electric Synchronous Motor DC 12V 5RPM Shaft 35mm With Power Supply Input 100V-240V Output DC 12V For Ornamental Fiber Optic Christmas Tree

【Description:】It's a combination of an DC 12V motor and a input AC 100V-240V and output DC 12V power supply. Easy to install and easy to operate.....
【TYC-40 DC 12V Synchronous Motor Parameter:】 Voltage: 12V DC； Speed: 5r/min ； Shaft Length: 35mm； Shaft Screw Thread Inner Diameter:....
【DC Power Supply Parameter:】 Input: AC 100-240V； Output: DC 12V ； Output current: 1500mA； Frequency: 60Hz； Power: 15W； Wire Length:....
【Attention:】 1.The power adapter is an DC power supply,NOT suitable for AC motor. 2.Too high voltage will burn the motor and power supply.....
【Package Include: 】 1*TYC-40 12V DC 5RPM 35mm Synchronous motor； 1*DC Power Supply； 1*Module.

Check Stock

4000W Motor Speed Controller, Motor Control Board AC 110V Adjustable Voltage Regulator SCR High Power Dimmer Controller Temperature Governor Dimming Monitor

Note: This product is AC input, AC output, can only step down, and the voltage can be adjusted only when the load is connected. It is useless to connect a multimeter with no load, because it is not a transformer..
Motor speed controller operating voltage range is AC 110V to 220V, max power is 4000W, long term operating power is 3000W, and adopting double insulation, meaning there will be no electric leakage if short-circuit or SCR burn out..
Protection: our motor regulator is designed with Anti-spike and anti-surge protection, RC absorption, fuse all enhance usage safety..
Aluminum Case: the motor speed controller is equipped with Aluminum case prevents it from easy damagement.
filled tin stops it from heating when in huge current..
Application: the motor governor can be applied to electric stove, water heater heat regulation, dimming lamp, small motor speed control, electric iron thermostat, etc..

Check Stock

Slim DIN Rail Mount AC/DC Current Sensor Module, Based on ACS712. (+/-20Amp)

The item disign based on ACS712 IC. The item provides economical and precise solutions for AC or DC current sensing in industrial, commercial, and communications systems. Typical applications include motor control, load detection and management, switched-mode power supplies, and overcurrent fault protection..
Operating Voltage: Regulated 5VDC. Operating Current: 20mA(max). Load Maximum Current: +/-5Amp, +/-20Amp and +/-30Amp selectable. Load Frequency Bandwidth: DC ~ 80 kHz. Minimum Isolation Voltage: 2.1 kV(RMS). Output voltage proportional to AC or DC currents. LED indicator for power supply +5V. Pin jumper option for signal output capacitor..

Check Stock

KAIWEETS HT208D Inrush Clamp Meter 1000A True RMS AC/DC Current Amp Meter VFD LOZ Mode 6000 Counts Measures Current Voltage Temperature Capacitance Resistance Diodes Continuity Duty-Cycle

True-RMS Clamp Meter: This multimeter can accurately measure 1000 Amp AC/DC Current, 1000V AC/DC Voltage, Frequency, Duty Cycle, Resistance, Capacitance, Diode, Continuity, and Temperature. Easy to use for labs factories and households..
Inrush Current Meter: Knowing the value of inrush current can help you locate a startup problem quickly, whether it's in the motor or in the starting circuit. The measuring time of the inrush current is about 100ms. When the current is greater than 10A, the Inrush function works well. The inrush function is only available in AC current mode, DC current does not have the inrush function..
NCV Detection & LED Flashlight: Built-in Non-Contact Voltage (NCV) Detector can easily and quickly determine whether there is a voltage. A convenient LED flashlight illuminates a dimly lit area..
Advanced Functions: The Clamp Meter has Variable Frequency Drive Filtering (VFD) and low Input Impedance (LoZ) modes, which can provide higher accuracy readings..
Safety Service: Safety standard IEC 61010-1, CAT IV 600V, CAT III 1000V. Double insulation. Use high-quality material, to prevent electric shock harm. 36-Month product service provided. 7/24 Customer Service..

Check Stock

3 Axis Stepper Motor CNC Router Kit Nema23 425oz-in 112mm Dual Shaft+CW5045 Driver 4.5A 256 microstep+400W 36V Power Supply CNC Controller Kit for Engraving Lathe Plasma Milling Drilling Machine

♞【Product】3 Axis nema23 stepper motor driver controller kit.
♞【Application】This cnc kit are widely used in engraving machine, printer,....
♞【Stepper Motor】23HS2430B Nema23 57 stepper motor.
♞【Driver】CW5045 driver Voltage: DC 24-50V.
Current: rated maximum output reaches: ±4.5A.
♞【5 Axis Breakout Board】5 Axis breakout boad with cables,this breakout board needs to be connected to the parallel port and USB port of the....
♞【Power supply】400W,36V/9.7A switching power supply.

Check Stock

Normally Open Current Switch Adjustable Isolation The AC Current Monitoring Current Detection Protection AC 0.2-30A SZC23-NO-AL-CH

Easy To Use: Current sensing switch is self-powered, requires no external power supply, operates at 0.2-30A AC, and can be adjusted with a potentiometer..
Convenient And Intuitive: The switch does not limit the number of opening and closing, the reaction speed reaches ms level, and the LED indicator can indicate the working state of the switch..
Accurate And Timely: Current switch is a straight-through structure design with isolation withstand voltages up to 2000V and hysteresis of less than 1%. It can be used under strong magnetic conditions..
High Quality: High-power MOS tube non-contact electronic switch, the outer casing is made of self-extinguishing material ABS..
Widely Used: it is suitable for AC current measurement and monitoring, AC motor overload protection, automatic control system electronic switch..

Check Stock

Bemonoc 6W AC 110V 60HZ 150RPM Adjustable Variable Gear Reducer Motor 50HZ 125RPM with Speed Controller CW CCW for Industry

...y for a long time. the controller shouldn't be lower than 35% of the full speed.
✔Why the speed of motor can only be adjusted to a certain range: because the motor is slowed down by reducing volt, after volt is reduced, the torque will also become smaller, and it may overload.
at this time, due to the increase of current, the heat dissipation will become worse, and motor will heat up seriously, which is easy to cause the insulation failure of the stator coil and the machine short circuit.
✔Package: 1PCS x One-phase Adjustable Motor AC 110V 6W adjustable motor (AC 110V 6W ) +1PCS x 110V 6W AC speed controller+1PCS Bracket . (If you don't need speed controller, contact us to minus price).
✔Widely used in packaging, printing, textile, dyeing, chemical, food, medical, pharmaceutical construction machineries. And advertising, office, petrochemical, instrumentation, stage lighting, transmission, automatic warehouse, parking access control system and other equipment..

Check Stock

LEDMOMO 1203BB 6V 12V 3A 80W DC Motor Speed Controller (PWM) Adjustable Motor Driver Switch

1203BB DC Motor Speed Controller regulate the speed of the motor by adjusting Pulse-Width Modulation (PWM)..
Working Voltage: DC 6-24V. Maximum continuous output current : 3A. Maximum output power: 80W..
The Motor Speed Controller built-in switch. You can control the forward direction and the stop of DC motor by the switch..
The circuit built-in a 3A fuse. Make the use of this motor safer..
Note! DC motor speed controller is connected to DC power supply. Never connect directly to household 220V AC power supply..

Check Stock

QTEATAK DC 12V 10A 6 Pin 3 Position ON -Off- ON AC 110V-220V Waterproof Momentary Polarity Reverse Switch Motor Control Black Boat Rocker Toggle Switch with Wire KCD4-223-QT

Product name: Waterproof Momentary Reverse Polarity Switch.
Switch Rated current/voltage: 16A 250V AC 20A 125V AC.
The polarity reversing switch can control the positive and negative rotation of the motor by connecting the power and ground and the motor "+","-".....
Package Content: 1 x reverse polarity switch.

Check Stock

MR CARTOOL DY2201 Digital Car Tester Multimeter 500-10000 RPM Dwell Angle Temperature Meter Multimeter

【Function】Measure DC voltage and current, AC voltage and current, resistance, Duty ratio, temperature, diode transistor, continuity, dwell angle of automobile distributor contact, and motor speed.
Full range overload protection, continuity buzzer.
【Applies to】This product is suitable for automobile detection and servicing, engineering design, experimental test, production experiment, etc..
【Protection】To avoid misoperation, mechanical protection device is applied to the current measuring jack .The "mA" or "20" A socket can be opened only when selecting current for measurement, otherwise they will be blocked to effectively avoid inserting wrong probe, enhancing the product safety and life.

Check Stock