ReviewsMotor Driver Board

DEVMO 5pcs DRV8825 Stepper Motor Driver Module with Mini Heat Sink for 3D Printer Accessories Compatible with RepRap 4 RAMPS 1.4 StepStick

  • ★The DRV8825 stepper motor driver carrier board TI DRV8825 micro bipolar stepper motor drive is a breakthrough..
  • ★Six different step resolutions: full-step, half-step, 1/4-step, 1/8-step, 1/16-step, and 1/32-step..
  • ★Simple step and direction control interface..
Check Stock

CenryKay 5pcs ULN2003 28BYJ-48 4-Phase Stepper Motor with 5V Drive Board and 10pcs Dupont Wire Male to Female Breadboard Jumper Wires Compatible with Arduino

  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
  • The motor is gear-reduced, the noise is extremely low, and it can be driven with 5V running smoothly..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board+Dupont Wire ..
Check Stock

Foifatt 313318001 String Trimmer Head Replacement for Homelite Ryobi RY15523A arborless Reel Easy Bump Trimmer Head Assembly P2009 RY15523AVNM

  • Drill/driver: compact design fits into small spaces, ideal for hard to reach areas Drill/driver: powerful motor with 15% better performance than a full-sized drill Drill/driver: LED light illuminates work surface for increased visibility.
  • Drill/driver: Magtray magnetic holder for convenient placement of screws and bits Impact driver: auto-load chuck for fast, easy 1-handed bit loading and ejecting.
  • Impact driver: tri-beam LED provides optimum illumination and eliminates shadows on work surface Impact driver: powerful motor provides enough torque for the most demanding applications.
  • JobPlus base with multi-tool head: compact tool head fits into tight spaces JobPlus base with multi-tool head: multiple position tool head adds handling versatility JobPlus base with multi-tool head: variable speed trigger allows precise speed adjustment.
  • JobPlus base with multi-tool head: compatible with RIDGID JobMax interchangeable tool head system Kit includes two 18-Volt ONE+ compact LITHIUM+ batteries which improves the performance of ONE+ tool up to 15% and features an on-board fuel gauge Dual chemistry charger: charges all Ryobi 18-Volt ONE+ batteries in as little as 30 minutes.
Check Stock

diymore 5-Set DC12V 28BYJ-48 Stepper Motor with ULN2003 Drive Boards Blue(12V)

  • Stepper motor driver board with ULN2003..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
Check Stock

MELIFE 3D Printer Controller Kit RepRap, RAMPS 1.4 + Mega 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display 3D Printer Controller Kit for RepRap.

  • The Mega Pololu Shield, or RAMPS for short,designed to fit the entire electronics needed for a RepRap in one.RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion..
  • The Mega2560 is an ATmega2560 as core microcontroller,development board itself has 54 groups digital I / O With the bootloader, download the program directly via USB without having to go through other external writer..
  • Large screen 12864LCD integration for SD card in the back, after slicing the file into the for SD card, you can select the corresponding files on the LCD.The board has encoder, can be achieved parameter adjustment, and the file selection print!The ramps can be Plug-and-Play, but it need to modify the firmware to support..
  • A4988 Stepper Motor Driver can adjustable current control lets you set the maximum current output with a potentiometer, which lets you use voltages above your stepper motor’s rated..
  • Packing List:RAMPS 1.4*1+Mega 2560 R3 with cable *1+A4988 Stepper Motor Driver*5+Heat sink*5+LCD control screen+cable*1.
Check Stock

RAMPS 1.4 Controller + MEGA2560 R3 Board + 5pcs Soldered A4988 Stepper Motor Drivers + 5pcs Heat Sinks + 19pcs Jumpers with USB Cable for RepRap 3D Printer Kit

  • SAVING SPACE: The RAMPS 1.4 board is designed to fit the entire electronics needed for a RepRap in one small package. So it can save space and cost..
  • SCALABLE: RAMPS interfaces an Mega with the powerful MEGA platform and has plenty room for expansion. A number of expansion boards can be added to the system as long as the main RAMPS board is kept to the top of the stack..
  • EASY TO USE: Using the bootloader, you can download the program directly via USB without using other external writers. Development IDE interface is based on open-source principles, allows you to free download for use in project work, school teaching, motor control, interactive works..
  • MODULAR DESIGN: The modular design includes plug in stepper drivers and extruder control electronics on an MEGA shield for easy service, part replacement, upgrade-ability and expansion..
  • POWER SUPPLY AND DRIVER: Supply part of the optional USB power, or as an external power using the AC-to-DC adapter and battery. This stepper motor driver lets you control one bipolar stepper motor at up to 2 A output current per coil..
Check Stock

MybotOnline 5 Sets Stepper Motor 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board

  • Stepper motor with a standard interface, motor diameter: 1.1", wire length: 9.05".
  • A, B, C, D four-phase LED indicates the status of stepper motor work.
  • Compatible with ArduinoIDE UNOR3 MEGA 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi.
  • Gift: 1x 10-pin male to female multicolor breadboard jumper wires，each cable length: 7.87"(20 cm).
  • Packing in a box: 5 sets Uln2003 stepper motor + driver board + 10 pin jumper wire.
Check Stock

5pcs A4988 StepStick Stepper Motor Driver Module + Heat Sink for 3D Printer RepRap

  • This stepper motor driver lets you to operate bipolar stepper motors in full-, half-, quarter-, eighth-,and sixteenth-step modes, with an output drive....
  • There are no phase sequence tables, high frequency control lines, or complex interfaces to program..
  • The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened..
  • The translator is the key to the easy implementation of the A4988. Simply inputting one pulse on the STEP input drives the motor one microstep..
  • This product is a breakout board for Allegro¡¯s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection.
Check Stock

MEROCO Montessori Screw Driver Board for Kids Montessori Materials Basic Skills Educational Learning Toys for 3 4 5 Year Old Kids Toddlers Sensory Montessori Toy Preschool Classroom Fine Motor Skills

  • Montessori Screw Board Will Help Teach Children (3-6) The Practical Life Skill of Using A Screw Driver. The Montessori Materials Board Will Also Teach Hand Eye Coordination While Working on Fine Motor Skills..
  • This Montessori Materials Toys Set Lets Kids (3+) Practice of Using A Screwdriver, Hexagonal Head By Removing and Re-inserting Five Screws Using The Supplied Tools..
  • The Montessori Screw Board (New Montessori Materials) Dimensions: 7.08 Inch X 3.35 Inch X 1.38 Inch (18 cm X 8.5 cm X 3.5 cm).
  • Montessori Materials Inspired Toddler Screw Board To Promote Hands-on Learning, Basic Skills and Fine Motor Development Montessori At Home Classroom Montessori Toys for Toddlers 3+ Year Olds.
  • The Montessori Materials Screw Board Great Gift for Toddlers and Older Children To Provide A Sensory Experience for A Wide Range of Developmental Levels.montessori screwdriver board set.
Check Stock

DC Motor Driver, DROK L298 Dual H Bridge Motor Speed Controller DC 6.5V-27V 7A PWM Motor Regulator Board 12V 24V Electric Motor Control Module Industrial 160W with Optocoupler Isolation

  • DROK DC motor driver input voltage range is DC 6.5V-27V, can be input DC 12V or 24V, rated output current of each port is 7A, total output power is 160W..
  • STRONG DRIVE: the motor controller board adopts dual H bridge, can drive two DC motors at the same time..
  • FORWARD and REVSERSELY ROTATE: the IN1, IN2/IN3, IN4 port can control forward or reverse motor rotation..
  • PWM SPEED CONTROL: enable signal terminal (ENA) input PWM can regulate speed, PWM frequency range 0-10KHZ..
  • UNDER VOLTAGE PROTECTION: the motor driver module is with under voltage protection to prevent instantaneous large current from damaging the module..
Check Stock

Kiro&Seeu 2PCS DC5V 28BYJ-48 Geared Stepper Motor with ULN2003 Drive Boards Blue for Arduino (5V)

  • Stepper motor driver board with ULN2003..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Stepper motor with a standard interface, when used directly pluggable..
Check Stock