ReviewsMotor Driver Breakout

RIDGID 18V Brushless 1/2" High Torque Hammer Drill/Driver

  • Drill/Driver: All Metal Gears For extended durability.
  • Drill/Driver: 24 Position Clutch Ring For ultimate precision when driving.
  • Impact Driver: Quick-Release Hex Collet Spring ejection for easy loading and removal.
  • Impact Driver: High Torque Output 0 - 1,800 in-lbs. of Torque.
  • Brushless Motor Technology Delivers more runtime, more power, and longer motor life.
Check Stock

18V SubCompact Brushless 1/2 in. Drill/Driver and Impact Driver Combo Kit

  • Drill/Driver: All Metal Gears For extended durability.
  • Drill/Driver: 24 Position Clutch Ring For ultimate precision when driving.
  • Impact Driver: Quick-Release Hex Collet Spring ejection for easy loading and removal.
  • Impact Driver: High Torque Output 0 - 1,800 in-lbs. of Torque.
  • Brushless Motor Technology Delivers more runtime, more power, and longer motor life.
Check Stock

RIDGID 9 Amp Corded 1/2 in. Spade Handle Mud Mixer

  • Brushless Motor Technology delivers more runtime, power, and longer motor life.
  • Impact Driver: SubCompact model is 30% less weight and 35% more compact in comparison to RIDGID OCTANE Brushless Impact Driver R86039B.
  • Impact Driver: High torque output with 1,800 in./lbs. of torque and 2,900 RPM.
  • Impact Driver: Quick release hex collect ejection for easy loading and removal.
  • Battery: Up to 2X more runtime and has 2X longer life compared to standard lithium-ion batteries.
Check Stock

BIGTREETECH 3D Printer Part Stepstick Mute TMC2208 V3.0 Stepper Motor Driver with Heatsink for SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 3D Printer Control Board Pack of 5pcs Step/DIR Mode

  • ✿【High Compatibility 】 BIGTREETECH TMC2208 stepstick can be compatible with popular motherboards like SKR V1.3 / SKR 1.4 Turbo, OctopusAnycubic....
  • ✿【Avoid Losing Steps and Without Jittering 】 SpreadCycle: The motor controlled by the PWM chopper mode operated more smoothly and avoid losing....
  • ✿【Excellent Heat dissipation】 TMC2208 silent driver has a large-area cooling position to lower the temperature even stepper driver is working....
  • ✿【Ultra Silent Step Driver】TMC2208 stepper motor driver adopts stealthChop ultra-quiet technology which can driver the motor to work under....
  • ✿【After-Sale Guarantee】We offer long-term after-sales guaranteed time for 12 months, If you have difficulties in using our step driver or other....
Check Stock

G-Hubble Ender 3 Dual Z Axis Upgrade Kit with Lead Screw Stepper Motor 3D Printer Accessories Parts for Creality Ender 3/Ender 3 Pro/Ender 3 V2/Voxelab Aquila

  • Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32....
  • Package: TB6600 stepper motor driver + nema 17 stepper motor + mounting bracket + inner hexagon spanner + M3/M4 screws.
  • Strive for 100% service satisfactory, any question or problem please do not hesitate to contact us, we are always happy to help..
Check Stock

Makita XT281S 18V LXT 2-Pc. Combo Kit (3.0Ah)

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" Driver-drill (0-500 & 0-1, 900 RPM) with BL Brushless motor delivers 440 in.Lbs. Of max torque.
  • Variable speed impact driver (0-3, 400 RPM & 0-3, 600 IPM) with BL Brushless motor delivers 1, 500 in.Lbs. Of max torque.
Check Stock

Treedix Breakout Board Module with Pin Header for Teensy 3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions. The breakout board is well-made, gold-plated on both sides to prevent oxidation..
  • All pins on the breakout board are accessible, Teensy3.5 is compatible with arduino integrated development environment (IDE).
  • Simple and easy to assemble, can be used in conjunction with a breadboard, the spacing between the holes on the board: 2.54mm.
  • The breakout board module can easily extend the Teensy 3.5/3.6 project to industrial control, home automation or other applications..
  • Note: The package is not include Teensy development board and breadboard.
Check Stock

DS18 PRO-DRNEO 2\ Throat Bolt On Neodymium Compression Driver 3\ Titanium Voice Coil 800 Watts 115dB 8-Ohm (Single)

  • DS18 designs its Compression Drivers with aluminum horns to make sure they are above and beyond the standard high frequency driver/tweeter/horns in the market. These bad boys give so much clarity to their frequencies that any audio enthusiast would believe their whole sound system is ready to deploy for a major concert..
  • PEAK POWER HANDLING - At 800W Max and 600W RMS the PRO-DRNEO neodymium compression (horn) driver boasts out-of-this-world power handling for a Pro audio sound you will love..
  • TOP QUALITY NEODYMIUM MAGNETS - Neodymium magnets provide a higher magnetic flux density in the air gap, which generates a much greater action force in the voice coil. DS18 manufacturs nothing but the best..
  • NEODYMIUM MOTOR STRUCTURE - Provides the most motor force of any other driver motor on the market. Intense high frequency loudness without sacrificing sound quality..
  • USE WITH A WIDE VARIETY OF HORN STYLES - This compression driver features standard 3" (101.6mm) TPI threading, which allows it to work as a replacement driver for many popular horns..
Check Stock

LAFVIN 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • Stepper motor with a standard interface..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board，With convenient use, direct docking.
  • Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift).
Check Stock

Dermalogica Clear Start Post-Breakout Fix, Acne Dark Spot Treatment with Salicylic Acid, Squalene & Hexylresorcinol, Fade + Brighten Acne Marks

  • Salicylic Acid: A Beta Hydroxy Acid that stimulates natural exfoliation, helping to clear clogged follicles and even skin tone. Hexylresorcinol: helps fade post-breakout marks and brighten skin’s appearance. Carob Seed Extract: This powerful plant extract targets skin’s natural regeneration process for visibly calmer and clearer looking skin. Squalane: Known for smoothing and softening skin, this botanical lipid emollient helps moisturize and stabilize skin’s barrier..
  • This is your reminder to not pop your pimples... BUT we get it — sometimes you can’t help it. That’s why we created Post-Breakout Fix, a gel cream spot treatment that fades post-iflammatory hyperpigmentation (aka red and dark spots that popping leaves behind)..
  • So if you’ve popped a pimple, the best thing to do is immediately apply Clear Start’s Post-Breakout Fix, which helps restore compromised skin after a breakout and helps fade the spots left behind. Can be used on any of your stubborn marks, both new and old..
  • We want our customer’s conscience to feel as clear as their skin does. To reduce our packaging footprint, Post-Breakout Fix’s carton is made with FSC-certified paper and the tube is made with 25% recycled plastic..
  • Clear Start is created by Dermalogica, the #....
Check Stock

Makita XT267T 18V LXT Lithium-Ion Brushless Cordless 2-Pc Combo Kit 5.0Ah ,

  • Efficient BL Brushless motor is electronically controlled to optimize battery energy use for up to 50% longer run time per charge.
  • The BL Brushless motor eliminates carbon brushes, enabling the BL motor to run cooler and more efficiently for longer life.
  • The electronically-controlled BL Brushless motor efficiently uses energy to match torque and RPM to the changing demands of the application.
  • Variable 2-speed 1/2" hammer Driver-Drill (0-550 & 0-2,100 RPM) with BL motor delivers 1,090 in.Lbs. Of max torque.
  • Variable speed impact driver (0-3,400 RPM & 0-3,600 IPM) with BL motor delivers 1,500 in.Lbs. Of max torque.
Check Stock