ReviewsMotor Plastic Part Mold

Volcano Fire on the Mountain

  • The Silver Bullet is a creative improvement on other ULV foggers on the market. Not only does the Silver Bullet boast a more powerful motor, allowing....
  • Some of the many functions include: Mold and Mildew Control, Sterilization/Sanitizer Fogging, Pest Control Fogging, Applying Concrobium Mold Control ,....
  • Fogging can be an ideal approach to mold abatement in damp, musty basements, attics, crawlspaces and any large area where mold is a concern. Can....
  • This is a cold Non-ThermalL fogger so the solution will come out as a ultra low volume liquid fine mist rather than a gas like it would with a thermal....
  • For fogging Concrobium Mold Control. Atomizes Concrobium Mold Control into fine mist. Great for mold remediation and prevention in large or....
Check Stock

Chocolate Molds Silicone for 3D Breakable Game Controller, Large Breakable Chocolate Molds with 1 Pcs Wooden Mallet for DIY Smash Game Controllers, Cake Baking, Birthday, Valentine Candy Molds

  • ...s measured approx 9*5*5*2 in, suitable for making breakable game controller chocolate for video game themed parities or events. The actual size of the finished game controller is: 8.7*5.4*1.7 in. Perfect for DIY gifts, mousse cake, large gummy, cake baking on video game birthday parties..
  • FOOD GRADE SILICONE: Unlike plastic controller 3 part mold sold now in the market, our breakable chocolate mold is made from premium food grade silicone.
  • it won't crack or deform easily. Silicone material makes it soft and durable, easy to use and release, non-sticky. Heat resistant temperature of this silicone mold ranges from -40℉ to +446℉ (-40℃ to +230℃).
  • Microwave, oven, freezer and dishwasher safe..
  • HANDMADE 3D BREAKABLE CONTROLLER: Just add melted chocolate into the silicone mold, spread and paint the chocolate on the mold. Then put the mold in fridge for 5-10 minutes to set. Just in case, you can apply a second coat of chocolate to make it stronger. Pay special attention to the edges to build them up a bit to have a strong edge. Then put the mold in fridge for another 5 minutes, and the chocolate will easily release from the mold. After that, all you need to do is filling and assembling!.
  • WHAT YOU GET: You will get 1 pcs of game controller breakable choc....
Check Stock

WR60x10220 Motor Condenser Fan Motor for GE Refrigerators Replaces WR60x10171 AP4298602 1257132

  • ✅[PART NUMBER]: WR60x10220 Condenser Fan Motor (115V/AC, 60Hz, 0.29A, 9W, 3000RPM),come with 3-pin plastic plug, 4 wires harness.
  • ✅[REPLACEMENT PART]: WR60x10220 condenser fan motor Replace WR60x10133, WR60x10171, WR60x10192, 197D1871P026, 1257132, AP4298602, PS1766247 and more.
  • ✅[COMPATIBLE MODELS]: The WR60x10220 condenser fan replacement is compatible with Hotp-oint, GE Refrigerators GTS22JBPBRCC, HTS22GBPDRWW,....
  • ✅[EASY TO INSTALL]:This condenser fan motor draws air through the condenser coils and over the compressor. If the condenser fan is defective, the....
  • ✅[AFTER-SALES SERVICE]: Fetechmate attaches great importance to the buyer's shopping experience. If you are dissatisfied with the product, plz click....
Check Stock

BioMoi Silicone Vaginal Dilator with BioCote Protection - Supports Women's Health and Wellness - Trainer Provides Protection and Relief - (Small Set)

  • 【MIX RATIO 1A:1B BY VOLUME】no scale necessary, this silicone mold making kit comes with 2 bottles, 2.86 lb kit, part A 1.43 lb, part B 1.43 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LOW VISCOSITY FOR EASY MIXING & POURING】this BBDINO 30A mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material, no degassing needed, the molds finished with BBDINo Silicone Rubber Mold Making 30A has great flexibility & Strength. very easy to demold, this silicone mold making kit is Great for making simple one- or two-piece block molds, no vacuum degassing is necessary.
  • 【POT LIFE: 30-40 MINUTES, CURE TIME: 3-4 HOURS AT ROOM TEMPERTUARE 25℃(73.4℉)】This liquid RTV-2 mold making silicone rubber cures at room temperature with negligible shrinkage, heat cure will shorten the cure time..
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】BBDINO silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【LONG SHELF LIFE & VIVID COLOR】Our BBDINO ....
Check Stock

Oatey 31270 Tubes Epoxy Putty, Display 4-Ounce, Sold as 3 Pack

  • All Purpose Epoxy Putty: A hand mixable two-part epoxy putty stick quickly repairs and fills anything made of metal, wood, glass, ceramic, stone, and plastic after kneading evenly..
  • Cure TIme: Use a scraper to cut the cement crack filler in 1:1 ratio, knead by hand evenly until the epoxy putty turn to light gray. The mixture start hardening after 8 minutes. After 24 hours, plastic epoxy will harden like steel..
  • Superior Performance: Hand mixable 2 part epoxy putty sticks are tough, waterproof and resistant to heat and cold. metal epoxy putty can be cured underwater and can also withstand continuous temperatures from -50°C to 120°C. When epoxy clay putty is fully hardened, it is strong enough to sand, drill, mold and paint..
  • Eco-friendly Formula: Our plastic bonder is made of epoxy resin, which has strong adhesion. And the plastic filler putty does not contain any irritating substances or odors, safe for the elderly and children..
  • Our Promise: Choose us, you will get 120g universal repair filler, scraper*1, disposable gloves*1. We pursue high-quality products and customer service.....
Check Stock

LODOCAVE Concrete Molds,Rectangle DIY Concrete molds and Forms,Courtyard,molds for walkways,Courtyard, Terrace,Garden Stepping Stone kit,Patio Flooring,Patio pavers,Outdoor Flooring.

  • ????1.【Quality Concrete Mold】:The Garden of touch with concrete to provide you with your own DIY design space, simple to use, does not require special skills and complex processes can help you create a part of your beautiful trails..
  • ????4.【Kind Reminder】:You can put the mold in different directions to add more creative mix.At the same time, you can invite your family and friends to participate in making your own trail together. I believe this concrete molds will leave you with the best memories..
  • ????2.【Corrosion resistant repeated use】:The concrete mold is made of high-quality plastic, beautiful, clean, bright, and durable. You only need to pour the ready-mixed concrete into the mold. After use, it can be reused after simple cleaning before the concrete solidifies..
  • ????3.【Applicable Place】:Concrete molds are suitable for gardens, streets, courtyards, terraces, driveways, and villa yards. You can use shells, pebbles and concrete to decorate, which will make the garden paths you create more perfect..
  • ????5.【Specification details】:Size: 17.7″x15.7″x1.7″. Color: black. Weight: 2 pounds.
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber,Platinum Liquid Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resin Molds Silicone Molds DIY N.W 2.2 lb(Persimmon)

  • ...ber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【LONG SHELF LIFE & VIVID COLOR】Our Sipolysun silicone mold making kit has a very long shelf life of over 12 months, you can easy save the rest materials for next time using by cover the cap back, no waste at all, and Sipolysun Silicone 15 Slow designed with a stunning Persimmon Color, you can easily see whether part A and B mixed evenly enough and also you will make your arts and molds in a unique and beautiful Color!.
Check Stock

WR60x23584 Evaporator Fan Motor Replacement Compatible with G.E and Hotp-oint Refrigerator Replaces WR60x10141 WR60x10346 WR60x10138 UDQR002GLL by Fetechmate

  • ✅[PART NUMBER]: WR60x23584 Refrigerator Evaporator Fan Motor (115 V/DC, 60 HZ, 3.3 W, 3-pin plastic plug, 2 wire harness ).
  • ✅[REPLACEMENT PART]: WR60x23584 Evaporator Fan Motor Replace WR60x10045, WR60x10046, WR60x10141, WR60x10138, WR60x10072, WR60x10346, 197D2038P009....
  • ✅[COMPATIBLE MODELS]: The WR60x23584 evaporator fan motor is compatible with G.E, Hot.point top-mount refrigerator GTH18GBDDRBB, GTH18GBDDRCC,....
  • ✅[FIX SYMPTOMS]: The evaporator fan motor circulates air through the fresh food compartment for efficient cooling.It may fix some problems: Fan was....
  • ✅[AFTER-SALES SERVICE]: Fetechmate attaches great importance to the buyer's shopping experience. If you are dissatisfied with the product, plz click....
Check Stock

Silicone Mold Making Kit, Mold Making Silicone Rubber 30A, Platinum Silicone Mold Making Rubber, 1:1 by Volume, Ideal for Casting Resins Molds & Silicone Molds N.W 2.2 lb (Sapphire Blue)

  • ...LIFE & VIVID COLOR】Our Sipolysun silicone mold making kit has a very long shelf life of over 1 year, you can easy save the rest materials for next time using by cover the cap back, no waste at all, and Sipolysun Silicone Mold Making 30A designed with a stunning Sapphire Blue Color, you can easily see whether part A and B mixed evenly enough and also you will make your arts and molds in a unique and beautiful Color!.
  • 【MIX RATIO 1A:1B BY VOLUME】no weighing scale necessary, this silicone mold making kit comes with 2 bottles, 2.2 lb kit, part A 1.1 lb, part B 1.1 lb, very easy to use, also the bottle come with tinfoil sealed inside the cap, double guarantee for no leaking.
  • 【PERFECT FOR ART, FOOD AND INDUSTRIAL APPLICATION】Sipolysun silicone rubber is a platinum grade additional RTV-2 silicone rubber, which is widely used for mold making of arts crafts, like casting Resins, Wax, Gypsum, Concrete, Soap, Candle and also can be used as Molds Making for Candy, Chocolate, Cake and Ice Cubes.
  • 【SHORE A 30 & LOW VISCOSITY FOR EASY MIXING & POURING】this SIPOLYSUN 30A mold making silicone rubber has low viscosity so that you can easily mix and pour the silicone material, no degassing needed, the molds finished with Sipolysun Silicone Rubbe....
Check Stock

EZ-SIL Silicone Rubber, Translucent, Mold Making, Shore A 30 (Gallon kit(17.6lbs))

  • ...rial, non-toxic and no odor, very flexible, soft and clear.You could also mix mold making silicone with mica powder to create new colors.l, non-toxic and no odor, very flexible, soft and clear.You could also mix it with mica powder to create new colors..
  • EASY MIXING & POURING: This silicone molds making kit includes part A and part B, the mixing ratio is 1:1 by weight. Pour the Part A and Part B together, then stir the silicone rubber for 5 minutes, make sure to stir the liquid silicone mixture thoroughly for better results.The working time is 5 minutes at room temperature..
  • NO BUBBLES: The bubbles of liquid silicone will automatically disappear within 2 hours, no vacuum degassing is necessary. The working time of making mold kit is 5 minutes at room temperature and the complete cure time is at least 12 hours at room temperature, it varies on your mold size and thickness. If it's s little sticky, please extend the curing time of silicone rubber.
  • GREAT FOR BEGINNER: If you're new to the mold making, this mold making kit is a perfect choice for you to try! No special skills or tools are needed. You could enjoy this fun and creative activity all day.HOW to CLEAN: If there's any spill, please clean with soapy water or rubbing alcohol..
Check Stock

EZETES Silicone Mold Making Kit, Translucent Liquid Silicone Rubber for Jewelry, Casting, Resin, Sculpture Silicone Molds, Soap, Candle Making - 21.16 oz - 1:1 Mixing Ratio Molding Silicone

  • FAST CURING & NO BUBBLES – Depending on the Size of Your Silicone Mold it takes up to 12 Hours to Cure Completely at Room Temperature. All Bubbles will Disappear AUTOMATICALLY within 2 Hours. In case of spill – Clean with Soapy Water..
  • LOVE IT OR LEAVE IT: We Provide Only the HIGHEST QUALITY Products. If You feel unsatisfied with our Silicone Mold Making Kit for ANY reason, We will Happily Refund Every Penny, and keep the Mold Kit as our Gift to You!.
  • MULTIPURPOSE APPLICATION – Our Silicone Mold Kit is IDEALLY SUITED for Making Unique Casting, Resin, Wax, Candle, Soap Molds – Your Imagination is Your Limit! Note: The Mold Making Kit is not intended for Food Purposed Silicon Molds..
  • PREMIUM SILICONE RUBBER MATERIAL – Our Mold Kit Translucent Silicone is COMPLETELY SAFE, NON TOXIC and ODOURLESS! Boost Your Creativity by Adding Mica Coloring Powder if you want to bring more Color to Your Silicone Mold.
  • EASY TO USE & GREAT RESULT – PERFECT FOR BEGINNERS! – Our Silicone Mold Making Kit includes 2 Parts of LOW VISCOSITY Liquid Silicone – 1:1 Ratio. Pour Part A and Part B Together and Stir Thoroughly, the Working Time is 5 Minutes!.
Check Stock